For sale is an ACT 2600 clutch with street disk. Lots of disk material left. Asking 220$ obo +shipping and PayPal6 bolt fidanza flywheel -soldBoth items are in excellent shape. Please text or call 724 420 3430
Excellent conditionACT 2600 clutch with street disk
Asking 250$6 boltFidanza flywheel -soldBuyer covers shipping and PayPalText me at 724 420 3430 I respond faster.
Hey guys, I have read quite a bit of posts on this subject but I still am not sure whats going on with this turn signal problem. My friend and I recently picked up a 1990 dsm which has it's completely own wiring harness for just about everything. The turn signals would all come on (on the dash...
Hey everyone. Long story short. I picked up a 1996 eclipse gsx completely stock except a KN filter. I have a build Journal im working on on here. I want some suggestions and opinions on my set up. First and foremost this a DD and a street car for right now so that alone is the deciding factor...
Hello everyone. I had posted a previous build journal on a 1996 Talon TSI. (2g TSI Winter Budget Build) journal title. I ended up parting my project out and using the funds to buy and sell a few dsms and clean up other endvours.I am now posting my second build journal and going in a...
Hey everyone. I am having a problem figuring out why I do not have spark on 1 and 4. I just put a new css and cps on this 96 fwd turbo along with changing out coil packs and PTU and I did a basic spark test and im not getting spark on 1 and 4. I also put in a copy of link with a different ecu...
Hey guys I know its a simple post but I wanted to see what mufflers you guys are running and what you suggest to really quiet down my exhaust.Im currently running a t3 header,hx35 12cm to a custom down pipe, then after that its pretty much straight the whole way back then 45s at the rear...
Hey guys I am currently playing around with some ideas and I wanted some advise on what other dsmers think on this. I am currently driving around a stock 6bolt all original with an hx35/bep and bc 272s. I am going to be switching to an hy35 going full t3 and going to build my own downpipe. The...
Hey guys, im just playing around with some ideas and I wanted some opinions from fellow dsm owners.I currently daily drive a 96 eagle talon tsi (AWD) converted to a 2gb eclipse and as of right now its getting painted at a shop. Im painting it white with a metallic black roof.
SPECS: 6bolt...
I just had to make a catchy posting title cause im sick of posting boring titles.Im sending my eclipse to get re-sprayed in the next week or 2 and I am leaning toward a couple of colors but I am very interested in other dsmers Idearsss. When I bought the car it came with probably a cheaper...
I havent been able to find much current information on the polyurthane/aluminum bushing combos that are out there.I wanted to get some opinions from people who have been running the split motorsports and UMS tuning bushings. Both sets look pretty good but the UMS ones are 50 dollars more...
I wanted to see what single disk clutches you guys are running between the 400-500 whp number. Now I know most of you guys are going to say ACT 2600 or Southbend which I have had experience with both. I wanted to see some reviews and opinions from the fan favorites I just listed and I would...
Hey friends, I have picked up a 1995 2g awd to daily and it has had an LSD swapped rear end. It is making a lot of noise when I turn at low speeds in a parking lot in either direction and recently a small amount of noise when pulling out. It sounds very similar to a CV axle going bad but I did...
I have been having some trouble with my engine timing lately and I wanted to source some outside opinions.This started on saturday when a friend and I went to get something to eat and left through a parking lot where my car had died while I was idleing at a stop light. I instantly knew this...
I know this is a bit of a noob question but its driving me nuts and I need to get this car running to get it down the road.Im having a no start issue. When I turn the key forward it will not click or do anything. I think I hear a relay clicking but that is it. I checked the alt and main...
Hey guys I have thought about doing this for a while but I could use some opinions outside of my own and my friends.The problem:
I have 4 cars and only 1 runs. I have a 1996 TSI that is in my profile with no rust and is modified pretty seriously and it is the only running car I have/ daily...
Hey guys Im kind of in a bind here. Im currently driving my tsi awd with transmission issues and trying to get my 99 NT eclipse on the road for my daily.I bought this car for a really good price but I it smoked white smoke and a lot of it. I drove it a few miles just to get it to my house...
Hey friends,I know a lot of material on this has been covered but im looking for suggestions and opinions in a constructive manor.My current issue is my ACT 2600 6puck unsprung. Is it working? Yes but not well. I have been running this one for close to 2 years and it does hold my power...
Hey friends. I know this is a bit of a nooblet question but Im kinda hitting a brick wall here.I have an ERL cast stainless exhaust manifold and im running a holset H1C. This is like the 4 time my bolts have backed out. It doesnt seem to matter how much I tighten them. Im going to buy a...
I have gone through and ebay 16g, mhi 14b, mhi small 16g. I found out my engine was on its way out due too rod bearing number 4 shooting metal into the turbos.Long story short I went and bought another bottem end and assembled it with new ACL tri metals and new rings. I plastigauged it and...
I was looking for ideas and opinions on future modifications to do to the old talon. I have had mine for 5 years I think now and I have come a long way from a 7 bolt that crank walked on me a month after I bought it. My mods list is faily up to date. The pictures of the body are not. Its going...
Hey everyone. I have been fighting with this issue for a while and im thinking its directly related to the ACT2600.My transmission is a Shep stage 2. Open differential with torrington bearing mod. I currently have a act2600 6puck unsprung. Shimed pivot ball.Oem TOB,clutch line, master and...
The car runs, and pretty strong from what i can tell but my southbend clutch is not holding up so i will be using a act 2600 till i can get some resolve on this southbend thats supposed to hold 500 hp.I know my posts have been all over the place and not real clear. The mods that i have started...
I know its not winter anymore but the build continues. I have 700 miles on the bottom end and i have already managed to break and act TOB and at 15psi i am pushing coolant. I will be dropping off the head at the shop tomorrow. The other problem i am having is my southbend tz clutch is slipping...
I have been thinking about this for a while and have not found it on here.
I know the popular way to ventilate crank case pressure is through a catch can and to the intake pipe that runs to the turbo.The other way that is not seen done on our cars is taking a line and running it to the...
PLEASE LEAVE FEEDBACK ON ANY OF MY POSTS. GOOD BAD UGLY I DONT CARE. COMMENTS ARE BETTER THEN NO COMMENTS. THIS IS A LEARNING EXPERIENCE.It has been a while since my last post. I didnt fall off i have just been so busy with internship and work but heres the good stuff.I have almost all of...
I have been working on this fuel pump for about a week off and on and i really need to get this car on the road. This is a 92 fwd turbo.The main issues im having with the car is the fuel pump has not been kicking on. Now im not new to dsms at all. I was outside one day went out and started...
Well after a 2 days of sanding and priming i finally got down to painting. It was around 19 degrees here last night. I had my trusty torpedo heater but still only heats half the garage. This is my first paint job ever. I have helped my friends with stuff before so its not completely new to me. I...
I got around to taking the head, intake, and turbo set up off.
I plan to try and clean up the engine bay before i assemble everything. I will be sending the head to a shop and having it checked for warp and decked down if needed. I will also be getting a valve job done, port and deburred.
I have been seeing a few guys with 6bolt engines switching to a 2g head. The reason i am told is because there is power to be gained because of how the 2g head flows and having smaller intake ports allows for more over all torque.My question is does anyone know what the better torque and...
My set up
ACT 2600 w\6puck unsprung disk
Fidanza fw 15,000 milesshep stage 2 trans prob around 10k miles
shimmed pivot ball 1 big washer and a small 1( brought my shift fork back to normal)
revised ACT TOB
removed funny revior thing before the slave cylinder with a straight peice of...
I am looking for a non abs brake diagram because im trying to do a swap tomorrow if possible. I have a 2g nt talon next door i can pull parts off of if i can make the brake system work. I think my abs crapped out. I bled all four calipers and my pedal fades every time i hit it. I cant find a...
My car is currently stopping but not very well. This all started last week when my lower ball joint came out of the socket and my car pretty much hit the ground. Fixed the ball joint but now i have a soft pedal and it goes pretty much to the floor.
During my repair i had to jack up on the abs...
I installed a new clutch master last week and clutch slave today. I have the act 2600 and cant get good pedal pressure. Is it possible that the rubber section of the line is collapsed. Its metal brake line from the factory all the way till it meets the one frame rail on the transmission side of...
I have been having a problem with leaking oil from boosting or excess pressure in the crankcase. I have done the research and i cant pin point my issue.Every time i get into boost i have oil covering the driver side of the inside of my hood and it leaks out onto the front bumper. I also...
I have been battleing some rear suspension issues. My car pulls to the right in the rear anytime im on a traction breaking surface such as snow or alot of rain. I just orderd new toe adjustment (bolts and trailing arm). I am one of the dsmers with the rear toe adjustments seized. Now my main...
Eagle Talon - Wikipedia, the free encyclopediaThe only info on this car is in this link. Has anyone every heard of this thing before and Wtf is all i wanna know? I mean what where they thinking when they wanted to make this thing. :| Im surprised after being on this site this long and all i...
1 Should i try and hunt down a 2gb talon bumper and a stock side skirt and add a gsx high wing.2 Or should i get a stock eclipse bumper with a clean lip add a set of aftermarket side skirts that are pretty plain an straight and the blitz rear bumper?Im repainting my colors in mind are...
I have had a bad wiper control arm for a while. It was cracked but not its shot an it cant really be fixed. I have access to a junk avenger does anyone know if the arm that controls the wipers is the same from avenger to 2gs?
I was wondering if anyone has a part number or knows what i can use to actuate the cyclone intake. I have been told that a dodge vacuum canister can be used but off of what make an model. Any suggestions would help. Also I tried contacting JNZ Tuning to see if i could get the cyclone intake...
I have researched a lot on this site an love it. I am usually pretty good at finding out my answers but at this point i need some guidance because this is a big decision and i dont want to have to undo any mods because i dont like them and i dont have the wallet too.My set up is current in...
I lowered my 1996 awd. I used Tokico illuminas and spring combo. Its around a 1.75 drop all the way around. I did the DIY camber kit in the rear. I used four washers on each bolt and still had to much negative camber an it wore away a good bit of the tires on the inside and you could still see...
I have been flipping through a ton of forums and i cant seem to come up with a solution for choosing the correct camber kit. I currently have Tokico adustable Illuminas with there springs. Its about a 1.75 drop if im correct(btw love this kit, prob my fav mod yet). I took the car to get it...
I have been battling this issue on an off for months. I know that the dipstick tube popping out topic has been covered more times then mike vics dog fight scandal but im having your worse then average dipstick issue.I used to have a 2g dipstick and it would pop out here an there an it...
I have an act 2600 clutch on an awd stage two shep trans. I had the stock slave go out an had trouble shifting so i grab a first gen slave an throw it on. Lasts for a few weeks. I was out doing a few practice launches and it didnt wanna grab second the right way. I get the car up in the air...
I tried to buy a set of tokico lowering springs from MAperformance and there outta stock on the tokico spring and adjustable illuminas. Now what should i do. I was set on getting these cause i researched them and wanted them for my street strip car. They wont have them back till july. I wanted...