Would anyone be interested in getting a 6 bolt billet 92mm stroker crank?Recently I have been looking for a 92mm stroker crank for my project and all I could find was Eagle forged 94mm crank. This crank from what I understand isn't suited for high power max effort builds. Finding a better...
*** I have decided to hold on to this gearset for now. If anything changes I will be reposting this ad.***I have a brand new PAR dog engagement straight cut gearset for sale. This is the latest revision from PAR to consistently hold 1000hp repeatedly. Most of the gears are now one piece...
New price tax season special!I have a brand new zero mile Kaaz rear LSD up for sale. Asking $826 with free shipping.It works way better than factory viscous LSD. Viscous units are now over 20+ years old and it is one of the things that will hold your car back traction wise. Everyone wants to...
I have a brand new Kaaz rear LSD up for sale. I have two of these so one needs to go. New they are $1040. Asking $826 with free shipping.Will come with a kit with the recommended oil. Will include it with the LSD.It works way better than factory viscous LSD. Recommended by Magnus Motorsports...
I have a billet 20g Turbo for sale. Came off of a running car. This turbo saw 27psi max in its life and 9k mile of street driving. Made 506hp with this turbo with supporting mods. Minimal shaftplay. This has a brand new OEM Karmax(OEM supplier). Everything was new from billet wheel to the...
These parts are in good condition. Only selling because of set up change and these parts has only 15K miles on it the most.-ACT lightweight flywheel 10k miles on it as well. $100-ACT 2600 pressure plate has less than 10k miles on it. Has dust on it from sitting around. It can be wiped...
I have been getting mix answers on what crank to go with for my four-digit horsepower project. I have done a lot of reading on this forum and have talked to the builders but nobody seems to have a definite answer on what to use. Some people have told me stock crank is the way to go but others...
JMF released their highly anticipated Billet drag intake manifold this week. Has any one thought about getting it? It has been flow tested and CAD designed. Flow numbers are great. And all Billet? Wow, just wow. Who is locking it in...
Overview
This is my second dsm i own, the other being the 1000ft monster that i am attempting to build. More on that can be found here: http://www.dsmtuners.com/threads/spooling-for-1000ft-record.505933/ This car is going to remain stock. Not going to do any sort of mods unless it will appear...
As you probably know from reading the title, this build is very ambitious build. This is the ultimate goal for my car. But as you know, things may not go the way you plan in life. For long as I am able to work on this car, I am going towards that end. There maybe some setbacks here and there but...
I know this is probably simple and I am pretty new when it comes to tuning.I try looking for a MAFRaw under display value and I can't seem to find it anywhere. In order to use MafComFT, it said I need MAFRaw and Closeloop displayed. I got the close loop displayed but I can't find MAFRaw...
Guys, i just recently went up to Michigan and purchased this beautiful last know eagle talon. Everybody know how f up these cars get under the wrong hands but she is all stock.The car previously had only one owner. It was garage kept, and all maintenance were done according to the manual...
I have read some of the discussions on this but i still can't come to a conclusion.Fel-Pro vendors are clamming that the composite are 85mm bore or 3.346inches. My block is 85.5mm or 3.366inches(.020), so how is the standard Fel-Pro composite gonna work?Fel-Pro 0 - Fel-Pro Head Gaskets -...
I could not find any information on what vehicles/engines hx40's comes with. I looked in Holset Turbos threat started by morphius and there was nothing there. We know what vehicles comes with hx35 but not for hx40's.So, where can you find hx40's?Please List the vehicle, then the engine...
Where i live they are non existence. Had a shop down the road that does 2wd dyno but they have closed down/moving etc... i dont really know what had happened. I was hoping to save up my money and tune it there until that happened.I look around in local forum with little help. No awd dyno to...
Is there any differences between the auto and manual 2g drive shafts? There is an auto 2g AWD drive shafts in the junk yard i am thinking about getting. I am not sure and my car is manual awd. My T-case right now is the 23 spline. 95-96 T case.
I am looking to buy a new exhaust manifold. My stock one started to crack and time to upgrade to something a little better. Looking at Kinetic and Bullseye they are similar in design. I need an opinion or someone who have experience with these manifolds to give me the first look. Both of these...
Having a hard time installing the lower control arm back up. After the axle install, the lower control arm don't want to reach all the way to the mounting brackets. Its like its been cut short. (the one underneath the tranny)Just give you an idea what i have done...Removed the axles...
Just want to know about the MPI relay. I am trying to start the car without fuel. By pulling the MPI fuses, this will prevent injectors/fuel pump form flooding the cylinders correct? Just wanted to make sure. Thanks.
I was looking up some videos and this video caught my attention. This video shows the result of a rod knock. I understand that there is alot of reasons why this could happened. One being poor clearances, poor maintenance, and bad tune.As i watched this video, this car has a rod knock like no...
Just started my car from a long sleep today(6 month)...Had an idle issues first start but soon as i clean the IAC and it started to idle normal. But, i started noticing a knock or tick or some sort coming form the head.I thought it might of been the lifters because the car has been sitting...
At first start, every time i crank/turn it on it wants to rev to 3k and stays there for abit then come down. i did some research and some suggested that it might be idle control going bad. the car just dont want to idle. after it stays up at 3k and when it finally come down, it stalls. Dose...
I have a chance to buy 1991 AWD Manual long block 6bolt with turbo in the junk yard for $225 or $350 to have someone pull it out for me. Its a rear find to be sittin in this junk yard but, there it was. Usually these engines been pulled and just the bare body remains. That car also have tranny...
OK, here is my delima... I bought this tranny form a guy who scam me along time ago. This same tranny i send to jack transmission to have it rebuild to stage 3 and cryoed. But not knowing what i have they(jacks) rebuild it and send it back to me in brand new paint...The tranny is now in the...
While searching for good turbo that wont break the bank, i came across "Precision Turbo Entry Level Turbocharger". They are advertised at Mapperformace for $599. At this price they give you several power options to choose from. These entry level turbo power range form 490hp-610hp. The turbo...
I know how important it is to find the most experience machine shop that knows our DSM engines inside and out. the machine shop in some part determined how long a motor will last in any conditions.That being said, I've got a spare motor sitting on the shelf that i am planning to have it...
i just wanted to find out if anybody had installed kaaz rear lsd(mechanical type/clutch type). its listed as part number SBM2031 on kaaz online shopping web site. i am ready to replace the weak factory viscous lsd to something better. kaaz lsd will offers better performance that being full time...
i got a problem with the injectors stuck wide open. i dont know if that has to do anything with 6bolt swap i had done. now i cant get it to run right. with the 6bolt
swap is there anything i need to do to the injectors/fule rail/which to use(1g,2g). i got an ecmlink v2 and is there an option in...
I am just freaking out, the motor is fully built 20 over pistons with new everything from top down. Try to started this afternoon ran it for 15 second and come to realized no oil pressure and pump not working.Questions-What are the damages to the bottom end?
-drain the oil one or...
I just bought me sets of ITM brand revised 3rd Gen 3mm lifters for $5 buck each form Parts dinosaurs 4G63T Mitsubishi Lash Adjusters. I haven't acutally install in the motor yet but wanted to find out if anybody here had a good results with them? I notice they are kind of alittle bit tall...
does anybody know where i can get a rubber sunroof seal. mine is worn out and its leaking badly when it rain. i need a rubber that rap aroung the sunroof glass. if anybody know where i can get some please let me know. Thank you.
Guys i am kind of new, i don't have a premission to post this thread on tech forum so i need help. i bought the car just about a month ago with no motor and tranny, i want to start looking for the motor and tranny now but i don't know where to start. i need a 6bolt motor form 1gen and 2g tarnny...