Alright guys I have a garrett turbo i just picked up and wanted to know if anyone could help me find out what turbo it is. On the compresser housing it has Garrett A/R .60m 24 The top of the comp wheel is 56.4mm and the bottow of the comp wheel is 74.5mm. The exhaust housing is a t4 and the...
Alright guys I had the nut on the end of the 5th gear back out into my end case on my 95 gsx. I tried taking it to get welded but its still leaking so im just going to replace the end case. My question is will the end case off a 91-94 awd trans work on the 2g awd trans?Thanks
Robert
Alright guys im looking for something to plug my antenna hole with until I get the body work done. So what all have you guys used to plug them with?Thanks
Robert
When you say water in it do you mean in the water neck? The last thing we did before we tried to start was top it off with coolant.Alright guys I'll be doing a compression test tonight and getting the battery check. Any other ideas?
We recently completed a fresh rebuild on my 2g. We are having trouble diagnosing a no start issue. We have have confirmed we are getting power and fuel, but still have no spark. We have swapped multiple coilpacks, transistors, ECUs, CAS(3), plugs, wires, and the engine harness. The Altenator and...
Alright guys Ive got a 95 gsx with a 6 bolt swap. I just got done with the swap and im not getting any spark what so ever. Ive changed out plugs, wires, coil pack, power transistor, Cas and cas harness. Mods on the car are as followedAlso the brake, coolant lights are both on when the key...
My bro is about to pick up a 92 talon TSI AWD auto and the car doesnt run. Needs a ecu injectors and a turbo. I have a ecu part number MD166262 will this work in this car?Thanks
Robert
Building my head and all I need to pick up is valve guides. I was looking into the Supertech Guides and was wanting some input on them good or bad. Here is everything that i have for the head buildBC 280 cams
BC Springs and Retainers
Engnbldr 1mm S.S. intake/exhaust valves
3g lifters...
Yup ill be running one on my car aswell. I know alot of ppl that are running this mod and not one of them have had a problem with holding boost or having any leaking problems.
Same thing happen to me. My DSMlink chip was coming off the board on my ECU it had one bent prong I had to bend it back and get one of the holders that locks the chip to the board. Just an idea.
Alright cool im going to bring it with me when I come over tomorrow/ or if you meet me somewhere in charlotte on sat witch ever so you can take a look at it and see what you think. Thanks David :D
Alright cool thanks. Has anyone done this before? Ive searched and cant find anything. I know there hast to be someone that has done this before. I need to know the right fitting to get.
Does anyone know what type of metal the top of the fuel pump housing is on a 2g? My feed line is leaking so I was going to cut it and weld in a AN fitting in its place. I was going to put a 90 -6an fitting weld it to the housing so the fuel pump sits in the other side. Has anyone done this and...
Alright im selling a 6 bolt water pipe and the guy that is looking at it has the 1g 7 bolt motor does he need a 6 bolt or 2g 7 bolt water pipe?Thanks
Robert
Yeah i torched mine and f'ed them up big time. All i was trying to do was change the wheel bearing and ended up spending amost $600 on the wheel bearing and alxe sucked. I had to cut the axle in half to get it out so i could put the new parts in ha.
No prob i hear you there that was just the only place around me that could get one. Have you tried calling the dealer to get the part number they should be able to pull it by the vin.
Yeah great post did help out alot. It ended up being just the bearings. 3rd and 4th were fine. But I had already ordered the hole 3rd and 4th gear set up from shep like a dumm dumm :ohdamn: so I just went ahead and replaced everything. Thanks again for the help :D
Im trying to finish up my 6 bolt swap in my 2g and i need a coil pack. I went down to the u pull it and none of the 2g had coil packs. I found a 1g 2.0 N/A that has one with the same connector as my 2g. I know the 1g turbo coils will work with a different bracket but does anyone know if a N/A...