The controller can accept a input signal from a MAP sensor, MAF sensor, or injector duty cycle. Brand new and includes wiring harness. Price is $145 shipped and PPd.
Okay guys, I'm starting to become even more confused. I recently finished my build and got it installed into the car. Two Fridays ago I started the car for the first time, it started right up, idled a little high but then came down to around 900 RPM. I let the car get up to temperature then took...
So I've been kicking around the idea of picking up another DSM if I found one within my price range. Well it just so happens that a guy on a local car page on Facebook posted the car up for sale a few weeks back. I messaged him and offered him an old rifle, a welder, and a little cash for the...
Hey guys, I removed the 1/8" BSPT plugs from the cylinder head before I sent it out to be cleaned. I purchased these replacement plugs from STM, http://www.streettunedmotorsports.com/parts/oem_4g63_bspt_plug.htm, but I can't seem to find any information online as to how tight these need to be...
I guess this is really a two part question, and this pertains to the OEM T-25. I do not have any of the stock turbo coolant parts, so I picked up a set of Kinugawa coolant fed/return fittings. So the first question is, can I feed the turbo as I have it labeled in this picture of a 2g water pipe...
So I'm wondering if I can test the cars electrical system without having an engine or any of its sensors installed. I'm wanting to check basic functionality of some of the electrical components (windows, sun roof, lights) to see what I need to buy, because I bought the car as a bare shell and I...
Hey guys, I'm trying to see what your OFH setups look like. Is it possible to run the oil pressure sender, factory dummy light, turbo oil feed, and an aftermarket oil pressure gauge? If not, what would you guys recommend running off of the OFH? I'm going to be using an Evo III OFH, and I know...
Hey guys, I've entered into a contest from Gumout to win a $2500 sponsorship for my project. Its on FB, and all you have to do is like their page in order to vote. Any and all help would be greatly appreciated!http://woobox.com/h57xjn/vote/for/1061757
Has anyone on here driven at Road Atlanta? Once I get my car up and running, I would really like to get it on the track there. Any idea of price or clubs to join to get in on a track day? Thanks!
I'm trying to see where you guys place your jack stands underneath the car other than the pinch-welded section right near the edge of the skirts. The stands I have mash the hell out of the skirts if I put the stands there, and I don't want to add more parts to my list. Thanks!
Hopefully you guys will know what I'm talking about, because google doesn't want to help me out any. I'm looking to replace some of the plugs located on the floor pans, under the seats. PNs or ideas of what I could use to replace them with would be awesome. Thanks!
Apparently the p/o of my car decided to put Heli Coils in all of the stud holes. When I started to thread the FP mani studs into the head, I noticed a bit of resistance, but I didn't think anything of it. I put a nut onto the stud and started to tighten the stud into the head, it got tighter so...
I read through a few threads, but I only found info on the 1g and GVR4. I'm trying to get everything together to get my GSX running. When I purchased it, there wasn't anything under the hood (other than the wiring harness). So my question is what sensors do I have to have to make the car run? I...
So, for starters, I'm a tard. I know... I have a box that I punched holes in, and numbered them, to keep the valves organized. Well, our outside cat decided to become an inside cat and guess what he knocked over? So now they're all mixed up. I can tell exhaust from intake, but what do I do know...
Hey guys, when I bought my car it was already pretty well disassembled. I basically bought a shell with a bunch of parts thrown inside, haha. I found 2 different cross members, and I was wondering if someone can tell me which one is correct for my GSX. And what is the other one from? Thanks!
Hey guys, I've spent the past hour looking for a decal I saw a while back. Its a silhoutte of a 2G on jack stands. Anybody know what I'm talking about? And where I can find one?
Okay guys, I'm hoping to post this up on here to have some future answers for guys like myself. I'm going to be running the Evo III OFH on my 7 bolt, and I need to know the size of the fittings I need to to get to run the oil cooler lines. I've been searching for the better part of the day, and...
Hey guys, I've googled this for the last half hour to no avail. I picked up a trans for my GSX in Sep. of last year. Not thinking there could be differences, I gladly paid for it and drove 6.5 hours there and back... Anyways, after searching the numbers on the trans, KW5M332NPZT SR2427, I've...
Hey guys, I'm about to start assembling my motor and I have a few questions about piston ring gap. I don't have a manual with me now, but I think the recommended gap is between .0098-.0138, with a service limit of .031. So far I've only checked the 1st ring on once cylinder, and at the top it...
Alright guys, I'm trying to find all the different blues on the 2Gas. I'm not looking for paint codes, I would like some pics! Thanks, Cj.Anyone know this color?
Hey guys, has anybody seen any videos of a shop on youtube that has decals on their cars that look like this? I can't seem to find the one I was looking at the other day, and I don't remember exactly what the decal says, but it looks something like these.Built For [Competition]...
Like the title says, I need some good affordable gaskets. I'm looking for an entire set, top to bottom. What and who do you guys recommend, and what do you use? Thanks!
So, what are my options? I've looked through the other threads about this, but no real solid information was given. Any ideas on this ++ TIME-SERT Threaded inserts for stripped threads, threaded inserts, thread repair stripped sparkplug's, Ford sparkplug blowouts, threaded inserts threaded...
Hey guys, I've got a few questions about getting my block machined. I've got a block with matching girdle, but a crank and pistons/rods from another block. What all do I need to have done to make sure everything is in spec and meshes fine with each other? Or can I get by with just having it...
Hey everyone, this is my 95 GSX, that purchased March of this 2011. When I got it, it had KYB AGXs, Ground Control sleeves, Eibach springs, Energy Suspension bushings front to rear, Stillen tower bars, and some larger sway bars. I was told they were Stillen too, but I can't seem to find any info...
Hey guys, I recently purchased a block from someone local. It ends up that it is a 7 bolt Evo block from the Evo I-III. Its the one with the oil squirters instead of the jets. So I'm wondering if these are less effected by crank walk because of the squirters. Also, where can I order bearings for...
Hey guys, I'm getting all of the parts ready to put my car together. I just bought a 97 4G63 block. I already have the internals from a 95 block. So I'm trying to find out what the major differences are between the 2G 7 bolts. Which years use the thrust bearings, and which ones use the split...
Hello everyone, first off, I know there are numerous threads on this, but I would like to narrow down the different opinions into something that more relates to my application.I will be running a 4G63-t in my 95 GSX. Its going to be running ACL Tri-metal bearings (main and rod), not sure on...
Alright guys, Im trying to source all of the parts for my 95 GSX. Right now Im looking for all of the sensors in the engine bay Ill need. I know of a handful or so, but if anyone knows of any that aren't on my list, I'd greatly appreciate it. Thanks, Cj.P.S. It has a manual trans.Cam Angle...
So Im getting ready to put start the reassembly on my GSX. I bought a Haynes manual hoping that would be all that I need. Its less informative than GQ for someone who makes $20k a year. Is it worth it to fork out the $100 or more on a factory maintenance manual, or can I fine what I need...
Hey everyone, this is my new project. It is a 95 GSX, the body has 84,*** miles, some suspension parts(KYB AGX shocks and struts, Ground Control coil over sleeves, Stillen front and rear sway bars, Stillen front and rear tower bars, Polyurethane bushings front to back). I have the stock 7 bolt...
Hi everyone, I just picked up a 95 GSX. It has pretty low miles for the year, 84k. It needs some work, but I bought it as a summer project. The car came with the stock turbo. A friend of mine and I were taking apart the turbo, and I think 3 of the exhaust fins were bent when the hot side of the...