Thanks man 😀 I am going to take the dash out today anyway and I will trace the wire ,but I was hopping that someone will know where exactly is going this wire .
Does anyone know where the black and yellow wire from the dimmer switch goes after this wiring harness plug? What does it power? I am in process of figuring out why my dash lights are not working and I found out that once I disconnected this plug they work ,the problem is that something is...
Does anyone know what is the interior color of the car with trimcolor code: 69H? I am looking for black dash and door panels and that's why I want to know
I did Evap delete about 10 years ago and recently I start having excess pressure in the gas tank, so much pressure that when I open the gas cap fuel is overflowing.I was thinking that safety valve on the gas tank is bad so I did replace it, but this didn't fix my problem and I found out that...
[email protected]. bad 60 foot time (2.1)The car was having some transmission problem
hx35 (7 blade),1000cc ,e85,26psi ,stock 7 bolt ,hks 264/264 cams.
You will have to jack the car and if you don't see any visible damage on the transfer case or the rear diff, you will have to start disconnecting parts .First you can take out the 4 bolts on the rear diff (the 4 bolts which are connecting the rear diff with the drive shaft) this way you will...
Hi.My a/c is cooling very good,but my compressor stay on all the time.
High pressure reading are 225psi and low pressure are 35psi.
When i turn off the a/c from inside they go to: high-165psi low-76psi
Why the compressor is not cycling?
My car is 95 eclipse GSX
I got hx35 and i am testing the oil pressure to the turbo.When i start the car i am getting 10psi of oil pressure at idle ..but when the car warm up its going to 0psi at idle ..When i rev her up to 6k its going to 25psi.The oil pump is fine:)What could be wrong?
I am with 16g turbo.Its sound like squeal.When i am on neutral its not making the sound..When i hit the full boost and hold on it its start making the noise")
I know what it is ..But i was hopping to find different solution ,because i just put the transmission back on.I shim the pivot ball when i was using the ACT TOB and before 4 days i open the transmission to put the stock TOB, because the ACT TOB sucks and i did't remove the washer under the...
Ok.When my car is off I can get in to gear,but when is on i cant .
I try to adjust the rod,but still nothing..
Is there a problem if my fork is lot more in the right side?