Block was stripped down and powder coated before machining and assembly.

Motor update pics :)

Here is a pic of my s472 that drew coated along with the sheepey many and Magnus cast, going Tuesday to pick up the rest of the parts to put this thing together.

So the Awd swap is completed while i was under there i cleaned it all put and sprayed it with rust bullet. Now starting to assemble long block this weekend and hope to have it in soon doing also a parts haul on Saturday!

What's the powder on that magnus manifold ?

UPDATE!!Got a few more parts and sent the car off to the body shop to shave and repaint the bay.Enjoy !!Sheepey Hot Parts kitTurbo and Valve cover shaved and coated by our very own Jason DrewAlso picked up a Magnus manifoldBoth wastegates also came in tial 40mm and aem boost...

Why not pick up a borg warner there relatively cheap and awesome turbos ??Check out my Spyder Build!

Thanks ! hopefully it is ready soon just finishing the awd swap and wire tuck !

So here is another small update Engine has been put together and a few more parts have come in enjoy the pics !Magnus Stage 3 Head6 Bolt BlockList of whats been done to the motor and parts usedMISCEvo Rear DiffHot Parts Kit From Sheepey

And awd swap is under way!

Thanks those last ones aren't the same ones that came on the car got them on the awd donor along with a bunch of other parts. The original ones look like new also

So ive picked up a block will be a fully build 6 bolt haven't decided on a rotating assembly yet.And now best for last ( Hot Parts Kit was made my Sheepeybuilt.com and is supporting a borg warner s472 )

FIC2150CC injectors dual 044 bosch pumps magnus fuel pressure regulator and rail.

So pulled the head off today and cleaned up a few more things old owner blew out 1st rod and piston. Also sourced out a local 6 bolt long block to rebuild.Also some parts came in today pics to follow !

The record should be beat this year by a local friend of mine running a s475 this car will be running a s472

Heyy guys. I wanted to start a new build thread.After being out of the dsm scene for about 3 years and parting out my last dsm I knew I wanted to get back into it but wanted something different this time around started to look into shells and found a clean spyder shell across the boarder ( I...

Car unfortunately was parted due to personal reasons about 2 years ago but back in the game and looking for a clean spyder shell

A video and some pics of the car at the 2012 dsm shoot out!

Hey Guys i wanted to photoshop some gold enkei rpf1 into my car to see how it would look if anyone can do that it would be great herers a pic of the car and the rims. ( if use first pic if car can be a bit lowered it would help thx)

Not making much boost at the line for some reason maybe 2 pounds and car has 4 inch intake with 2g maf and kn intake.

Even under 4500 2 step i cant hear it. Does my tubo have a silencer ring Justin?

From videos ive seen that holsets have sord of a whistle to them when reving up the engine, Mine does not any idea what it could be?

Just checked again today and it was 24 at idle and 42 at 4500 rpm. Does that sound about right or do i have to change something?

Im seing about 23 psi at 1000rpm idle and about 47 psi at 5000rpm 2 step does this sound about right to you guys ? Just got her running about 5 minutes ago.

Yea 45 an fitting of the pan and straight fitting off the turbo.

There is no way to take the bend out of the line i tried running it with 2 45 an fittings and they hit eachother. The drain is a smooth bend down to the pan but not sure if the chra clocking can cause any issues.

It is not its facing a little bit front due to the intercooler piping do you think that can cause a problem?

And she is almost ready !

What you guys think?

Comments?

I will post the results sometime tomorrow once the fitting arrives. But so far its looking good.

I think i might of figured it out if i add a straight Npt out of the turbo it will give me room to use a hose and the An fitting at the bottom.Ordered one of theseand it should come out something like this

What did you end up doing im having the same issue?

So i am having a little problem with my oil drain line not sure what do do about it any suggestions?

Keep us posted how the car deals with the heat from the tubular manifold. About to intsall one my self and didnt want to coat it or wrap it .

Have you had any isseus with the heat on the carbon?

How are under hood temps ? Going to coat manifold or wrap it ?

Manifold is in along with the new tial 38mm wastegate ! check out the new pics guysAnd here is the straight line specialties manifold . What a Beauty !

So i got my manifold this weekend!! These guys were flawless threw out the hole process would not hesitate to deal with them again! Great manifold and great customer service. Work of art!!!!!Here is some pics enjoy !

Manifold has been shipped out should have it by sat !

Thanks deff will !So some updates !SLS Manifold being made !

Just put in a order last week with straigh tline specialties for a t3 dsm manifold, so far they been nothing but great and have had great customer service manifold is not ready yet but they send me some teaser pics today. Stay tuned for the rest of review ! This manifold will be bolted up with a...

so i should remove the bolt?

Hey guys i no this is a newbie question but where does this hose go ? does it go into the back ? when i removed the thermostat housing i completely forgot where they were going.Does does this go into ?is this bolt suppose to be blocked off?

Damm it only i only found this earlier such a idiot buying top quality ! what was the point on spending 10k on a build if it could be done with 500 dollars !

" And my kids might not go to college because of all the money ive spend but at least they will have a couple of dsms with turbo and racing rimmmms!!!!! " LOL

So today was a nice day decided to start doing my motor, transmission mounts also just picked up my Bep t3 .70 housing thanks to rtmracing.com, Cant wait to get this thing running.

Pics???

Nice build you should use the awd parts and do the swap on yours !

So now its the start of a new year and with the car being parked i figured i would do a new set up, and ended up picking up a bran new holset hx40 with billet wheel Thanks to Justin i got exactly what i needed ! thanks once again Justin for the amazing new turbo. Now just have to order the...