Ive been thing to search for the answer but no luck. I have a 95 car what I need to wire for a 98 CAS. I have a spare pigtail from the 98 and I know I gata invert spark wires and click on the option on ECMlink.I just cant seem to find a diagram on how to wire the 98 CAS it into the 95 harness.

Ive been looking for a T3 hotside to put on my B16g (cause i have a nice T3 manifold). Ive seen some ebay type turbos with it but I just want the hotside. Does anyone have any leads on one?Or could I just get away with an adapter?

I finally decided to get my 95 talon awd back to live. I have a spare motor that came from a 98 GST so i decided to drop in in the 95. I do have ECM LINK V3 in the car. I know i have to do switch the firing order.My question is, can I run the 98 CAS like i would the 1g CAS and just click the...

looking to buy a built TRE or SHEP stg3 transmission for awd 95 talon. must be in good shape low miles. looking for a local pick up but will travel if price is right (with in california) let me know if you got a friend with one or if you got one just post here.thanx

Ive tried looking on search for the specs of the stock radiator fans (95-99 turbo models) but all i find is the write ups for slim fan instals.im looking to find out how much amps each fan uses. im planing on making an electric fan kit along with a controller unit for another project car and i...

I've looked at the tech articles and i also searched for the answer and didn't get a strait answer. i want to get rid of power steering on my awd and I'm wondering if there's by any chance possibility of swapping an rs manual rack into my car with no problems?... if not i herd before on this...

i have a costume ported box build for one ten inch subwoofer and no its not like the ebay boxes that take up all your trunk space this one actually sits very low (about stock floor height) and you still have access to jack on the side and comes with a cover for those wanting to put battery in...

im in the middle of another engine build and had some questions about going 2.3 or 2.4 stocker on a hybrid motor in a 2g.i currently have a 6 bolt clock with a 2g head in my 2g. im about to put a new virgin cranck into it but a friend told me to look into going stroke engine.now ive...

im looking to upgrade my turbo set up all together this winter but im not sure of which path to take. last turbo i had was e316g and i loved it full spool by 3k 18psi all the way to redline. but since im rebuilding the bottom AGAIN i figured a bigger turbo would be nice. now i always wanted a 50...

ive been looking at RM for a while to get my front and rear sway bars but i ran across this on ebay and was wondering if yall think they will really fit an awd model? i think they are worth looking into since swaybars are swaybars. but let me know what yall think.1995 1996 1997 1998 19999...

This morning i started hearing a ticking from my engine as i drove it (not under load) i began knocking and it happens on every gear at above 2500 rpm (only cause link is set to ignore before that mark, if not im sure if would show sooner. Now im thinking something bad with block. But can it be...

Like tittle says i got fic 750s for sale 190 picked up 205 shippedneed lower seals thats about it.pm me and ill get back to ya as soon as i can.

so for the list of my engine build and what i have go to my profile its has everything up to date.now ive been trying to play with this engine to get it to pass smog but my HC is too high meaning im not completely burning my fuel.like said i do have 272 delta regrinds of the hks cams...

i tryed looking for this but count find anything i just want to know if the 1g turbo coils are interchangeable with the 2g turbo coils cause i need to replace one of mine asap, thanx.

has anyone herd good things about this manifold? im interested in getting one since i want to go external gated. EVO ECLIPSE GST GSX 4G63 OBX SUS304 TURBO MANIFOLD | eBay

got a complete front brake set up of a 95 gsx for saleupgrade for any other dsm thats not a 2g awd. all you need is to resurface the disk and your ready to go!comes caliper with pads (used) lines already attached and disk.160 obo plus shipping and paypal fees.

i have a few performance and OEM parts for 2g DSM cars and some 1g. prices are negotiable and will trade for other performance parts only.competition light flywheel in very good shape .106 teeth count .for 7bolt turbo models .could use light resurfacing just to be safe. asking 110.00...

For any DSMers out there in the Sacramento area. im trying to get more members to come out and bring their rides.the place: off 99 and calvine lowes parking lot. when: every friday 7-12pmim there pretty much every friday and it seems like im the only DSM out there. just trying to get...

the other day i was running late and only gas i could get was arco so i got 10 bucks worth but i noticed that on my way home from work when i was getting on the freeway on 3rd gear around 5-6k rpm i got knock, i know this cause my dsm link blinked my engine light.on every gear when im...

this following kit is for 95-99 turbo DSM (ECLIPSE OR TALON)up for grabs is a godspeed Front mount inter cooler kit. (sprayed black but can be taken off with brake cleaner) http://www.godspeedproject.com/store...products_id=48also comes with dejon L pipe flanged for any greddy BOV (bov...

like the tittle says, im looking for the 97-98 turbo talon rear bumper with the corner and lower bumps. shot me pm with picture of item and amount wanted. im trying to get my car painted by end of this month and would love to have that bumper.

I want to install the 05-06 outlander front brakes on my car but cant seem to find the caliper brackets anywhere around.ive searched all junk yards and dismantler in a 100 mile radius and nada.:cry:anyone have an online source that is not too expensive for these brackets?

I would like to know how to ID 1g 3000GT VR4 calipers from the 2g.:hmm:reason been is i have a guy trying to sell me a set but i dont know if they are from a 1g or 2g. he doesn't know ether so im hopping for a visual difference (with picture if possible) or a stamped part number from someone...

Ive looks at a couple threads in the forums and have found out i CAN roll/pull my quarter panels easily with the right tools.my question is: can i roll/pull the front fenders also? i ask this because since the front rolls inward there is no actual lip or flange so how does it get done...

ok so my back part of my car vibrates and makes noice when im engine breaking below 3k. sounds like its from the back shaft/ rear differential area. what could be the cause? u-joint? or one of the shaft holders?

i dont normally even look at of-brand parts but this auction came up on a search for a 50 trim and it seemed like it is a great bang for your buck but ive never heard of this brand. do you guys thing its worth it? 2g dsm turbo kit ,eclipse/talon turbo kit .50 trim - eBay (item 230579109534 end...

im on the market to get a new HKS BOV just to try something new since ive ran my greddy type s for two years now im bored haha.well i got on ebay just to see what they got and i came across these just dont know how to tell a real one from a fake.now i know the odds of these been real...

so i wanted to get rid of my cruise control crap under the hood to clean out engine bay and have less things go wrong.but buying a new 2g spyder non cruise wire was to expensive and i couldnt find any in the junk yardall there was that didnt have cruise control where the 1g 2.0 liters...

now i have a 1g tb i just installed and every morning when i turn it on it will idle like at 2100 rpm and then slowly come down as it warms up, is that normal? when ever i drive into the city my car will idle hight sometimes like it doesnt know what to do with the IAC sensor. and sometimes it...

OK so i looked at all the threads and didnt find what i was looking for. i still have my cruise control in and i plan on keeping it in for now. what im looking for is the part number for the output wire from the TB to the black box. any help is greatly deprecated.cable its self is still...

just letting yall dsmers in the area if you need an engine hoist i got one for rent2TON capacity foldable. 40 bones gets you five days 100 deposit can include chains and engine leveler if needed.also tell your friends abt it please. im trying to raise some extra money to finish my...

It seems like most boostleak testers are to expensive so i made my own and created this as a write up of how you can to for about 11.00:thumb:PICTURE ONE: you will see the parts needed .gas leak tester .3/4 doble female ended joint .2'' PVC END .Teflon tape .pipe glue (or other that you...

It seems like most boost leak testers are to expensive so i made my own and created this as a write up of how you can to for about 11.00:thumb:PICTURE ONE: you will see the parts needed .gas leak tester .3/4 double female ended joint (the length is up to you. i used 1 1/2") .2'' PVC END...

first of all im not asking if I will get what others have on their similar set ups im asking if its possible for me to reach 300 awhp on 91 pump gas alone with out the need of running ether meth injection or E85.my set up is as follows: 2g stg one dsm graveyard head with 272 Delta cams...

so its about that time a year to get new tires for my car and im looking for something affordable and good on corners (dont need grip on straits since im awd)i got a couple selections here just wanted to hear some input on any to see which to lean towards.1. sumitomo HTR Z II: Sumitomo...

ok so first of all my question is not about how to install it into my car i got that part down.my question is i want to run it with the db guage it came with and also hook it into my ecm link.is it possible to run both at same time (just want to be clear)? and to what pin can i hook it...

so i finally got my new motor in car and got her running on the road. but after first 40 miles ive noticed my car is sputtering and sounds like an STI (not good). i looked on my ecm link and played with it turns out my number two cylinder is misfiring. i changed plugs to recommended (br7es) NGK...

so i just finished my 6bolt/2g head install and got the car running but i noticed the needle on the cluster is all the way at high. i cleaned out the wires and made sure they were pluged to sender but still same thing.the odd thing is it stays up even when car is off.i do have an...

so i bought a steering wheel for my car to have more leg room and i got the quick release with it but still need to buy the adapter hub. my friend has one that came of his 3g eclipse will it fit my car? i already know it fits the wheel fine.

where can i find a step by step to changing cam seals (with pics if posible)

so after lots of research ive found information on how to break in the motor and also different methods. the one that i will be using is the "go all out" method. i do however have some last minute questions that i want to run by to make sure im all green to start the car.1.i have 272s with...

im in the process of a complete rebuild of my motor and before i took transmission of i had an issue with my clutch it would only engane half way up and it was hard to get into gear.ive read several thread about replacing the shift fork and pivot ball and sometimes even shimming to make...

i just put a 6bolt into my 2g gsx and im running the 2g coolant pipe... but i noticed the block dont have the hole for the return coolant line.my question is where do i find a return source to replace where the 2g's was?

i read an article here about cam degreing and the affects but i need help is how to do it? a walk through if possible.im getting an assembled 2g stg one head from DSMgraveyard with 272s and just wana know how to make sure they are "degree" and if not how to do it.thank you in advance...

i found these on an action and they look like the ones we use but just wanted to make sure no modding was needed to get these to work on a dsm like resistor boxim looking for a strait plug and play.HONDA S2000 950 CC FUEL INJECTORS: eBay Motors (item 160474967962 end time Sep-06-10...

im looking on ebay for a 6bolt awd flywheel to go with my stg 4 XTD clutch im putting in and im wondering which of the following flywheels would be the best.XTD F1 FIDANZApls only reply on personal experience not believes.

im currently working on building a 6botl bottom with a 2g head i just have a couple questions regarding compatibility.will the 2g front case, water pump and oil pump bolt up to the 1g block?

hey guys its been a while since i've posted anything since i've had a rare thing happen... my dsm was running perfectly for about 6 months ROFL.OK now for business, my car is a dd and weekend warrior and the mileage is starting to catch up im around 160,000 miles now and my rings are...

hey guys i went to the local picknpull and found a 95talon tsi... when i looked under the hood i found the turbo tranny and cams had been taken off... but when i looked at the exposed head i notice it had ARP stubs:hellyeah: i took all of them of except one, and tree of the other stubs were...

so i need the bolt size, length, thread pitch or if possible part number for the following:the bracket that holds the front driver axel to the block. both of them snapped of and the bracket is just hanging. luckly the axel didnt pop of but im hoping taking the broken stubs out wont be a...