Hey guys my factory alarm works but when I press the remote lock the doors lock like they should but I don't hear my horn honk to confirm my doors are locked even if I press the remote twice is this possible on the 2g or is there no horn sounds ?? Also when you press the lock are the headlights...

Hey guys need some help here so my car is at a shop for a alternator And the guy says my battery is Completely drained over night With the car off, any idea on common place to look for where this power draw is coming from?Rix

Hey guys I'm not sure how to read this pic but what Is happening is my main switch opens and closes every window in my 2G Spyder except my drivers side windows won't go up and down how do I read this to test if the harness is getting power to the drivers side windows by using the pic I provided...

hey guys i have an issue my CC used to work when i had a 6 bolt engine installed but when the motor died i bought a normal 2G 7 bolt Motor and had the shop install it for me ever since that my cc no longer works i dont know what it could possibly be the shop says they dont know too and i do not...

Hey Guys I need to order an intake manifold gasket for my 2G and I deal with RTM Racing for my supplies but they have 2 gaskets they carry for my stock 2G manifold and I just dunno what the diff is and if the cheaper oem will be fine but one is the OEM Intake Manifold Gasket for CDN$11.69...

Hey guys will a 1G throttle body work on a stock 2G intake manifold without any modifications?This pic i posted is the old intake manifold that is installed in my 2g and i dont think its a 2g so im replacing it with a stock 2g intake and And was hoping this throttle body that I have shown in...

Hey guys on a cold start my car squeals when i turn my wheels or step on the gas but today i took my car to the shop and they tightened my alternator and power steering belts everything seemed find and the sound went away but now the battery and brake lights show up dim looking on my gauges and...

Hey guys been fixing some boost leaks and found this wire harness that needs to be pluged in to something but no matter where I look I can find where it goes here's a few pics of it thanks,Rix.

Hey guys so i bought a boost leak tester and when i put the boost tester on the turbo outlet and put pressure to it im using a electric tire inflator which on gives 5 psi pressure (ill buy an actual compressor tomorow) but when i spay down the car with soap spray i notice alot of bubbles foam...

Hey guys so the car runs amazing but when im in the highway and really step on it under high boost like in 5th gear going 100+ km/s I can hear to spooling noise then all of a sudden sound like whosh is released without me letting my foot off and get a turbo surge I think any idea on what this...

Hey guys I'm doing an oil change on my 4g63T what's better oil to use 5w30 or 10w30???Rix.

Hey guys heres my link log with my boost duty cycle im trying to get my boost set to a safe limit in link like 10psi i think thats the safest for an big 16g with stock motor right? i read the guide that says put your duty cycle tables to 50% on all table first so i put 50.0 but im not sure if...

hey guys so i have link install and running and i bought the Ingersoll-Rand 3-port Boost Controler solenoid from ECMTuning when i bought link but my question is i dont know how to installed this there are two wires that needs to be soldered by to where??? and then theres 3 ports? what goes where...

Hey guys so I installed a new heater and had to remove the dash and passanger air bag I reinstalled it all and now I get a srs light on my gauges any idea how to clear this up???Rix.

Hey guys so my issue is that my switch for my drivers side window is broken when I press for it to go down or up on my drivers side window nothing works but my others windows work on the switch and when I pressed my top to open all my windows rolled down including the drivers window how can I...

Hey guys so I was under my car working on the turbo and looked we're the alternator is and noticed the wire harness attached in that location I seen there to separate wires that have been cut and I can't find we're they belong here's some pics of the two wires please let me know what you think...

Hey guys so I don't have a no cat on my car I'm just running a test pipe and just got my turbo rebuilt from Justin but when I idle my car has white smoke comming out of the exhaust and when I rev the engine seems like the smoke gets bluish in color any idea if having a test pipe and no cat...

Hey guys so heres my issue I have a greddy type-s genuine bov but when I rev my engine I don't get the woosh noise like you see everyone and my bov only sounds when i really step on my car how to I get this set up do that I get proper sound , I have a hose coming from my intake to the bigger to...

Hey guys so I'm trying to program my remote and Am unsuccessful in doing so when I put the key in my door I turn the lock I hear a relay making a noise but the doors power unlock and lock don't happen I have to unlock and lock manually , I tryed to follow the instructions for programming a 97...

Hey guys so i have big problems my 2G Eclipse now has a hard time starting and if it does its runs soooooo rought and dies after 3 - 6 seconds iv tried starting it like 5 times and no change it will not run this happened after I installed dsmlink in my 2g eclipse the guys at ECMTuning preloaded...

Hey guys so I installed my turbo and forgot where these tubes connect to and in which order im running a greddy type-s bov and an after market chrome intake as well as my 16g turbo and the j pipe has a welded nipple on it aswell,l I posted a pic with the part in question and also a pic of my...

Hey guys can anyone let me know what the torque specs are for the 1g factory oil feed line for the turbo that bolts to the head is? Thanks, can't seans to find any diagrams with it.Rix.

Hey guys I'm trying to figure out what this harness plug is for on my 2g gst its locaed on the passanger side by the battery I tried looking in the manual and can't find nothing You can see in this pic that someone has taped into the one wire I'd like to know what the (Blue) wire is for I know...

Hey guys I'm from BC And tried to register on the forum and when I try it says registration has been disabled anyone know how I can get registration for BCDSM?? Thanks,Rix.

Hey guys so I'm trying to install my 16g tdo5h turbo but I noticed for the oil return line on the bottom the end that bolts up to my turbo is flanged different on my 2g its prob like that because I had a garret stock turbo on there before and it matches that but what oil return feed line do I...

Hey guys I hope this makes sense but I have an issue with my o2 housing for my 2g eclipse I'm trying to install my evo I 16g turbo and wanna use the o2 housing that came with that turbo I notice the o2 sensor is in a different location then the 2g version but my question is how do I bolt the o2...

Hey guys so I finally caved in and bought a ECMlink v3 full version and also am doing the 2g EEPROM conversion for my 97 ecu , my question is I also bought the Innovate MTX-L Wideband Gauge Kit is that a good wideband?? and also i got the Boost Control Solenoid not sure if i needed to get it...

Hey guys so I was cleaning my garage out and found these 510cc injectors that I have never used but came with the JDM version 4g63t engine I bought to replace my blown one I guess the mechanic put my injectors from the blown engine in so I'm guessing they are stock 440cc injectors are these...

Hey guys so I found this odd relay that I don't know why it's there to begin with but it's zipped to my fuse box harness and one green wire is grounded and two wires the red and black are tapped under that fuse box to the headlight fuse and then there the blue wire that runs and is tap to this...

Hey guys when I took my front bumper I noticed that I'm missing one of these things from one side I don't know what the parts is called so that I can order to match the other side please let me know what you think thanks

Hey guys I just pulled my turbo and was wondering If I can reuse these gaskets?? I bought some copper spray and blue rtv sealant please let me know thanks.

Hey guys I have a huge is with removing the bolts from my 16g turbo I can't seem to loosen the bolts I have sprayed wd-40 and still cant loosen them the o2 sensor won't even budge please help me with any advise I don't have a impact driver only socket wrenches and wrenches is what I own

Hey guys anyone know any good 2G dsm auto repair shops that work on these cars in the west cost states or ever in west coast Canada?Anyone?

Hey Guys I just ordered my triple pillar pod for my 97 Spyder GST my question is will it work for my air lift pressure gauges?? Has any one tryed that ?

Hey guys I have a question I need to replace my leather rear seat on my 97 eclipse would the rear cushin seat of a spyder be different then the seats of a coupe?

Hey guys so after removing my dash and pulling my heather core assembly I found out that my blend door was actually broken is there any part number for a replacement blend door to get this fixed?

Hey guys so I pulled my heater out to find out that my heater core assembly blend door is broken and needs to be replaced is there a part number so that I can replace that part?Not sure what I can do to fix this ?

Hey guys I'm thinking of gettin bigger injectors for my 4g63 motor the mods I have are big 16g evo , greedy type s bov, smic , cold air intake are fic 650 injectors good enough ? And can I run them with have dsmlink??

Hey guys so on my last thread I decided to get my Evo I 16G Turbo rebuilt but what are the difference with that and the evo 3? and is there Some differences that Id notice right away when driving my car on one vs the other??

Hey guys is the 49178-01450 = evo 1 16g turbo a good turbo to rebuild???#I have the evo 3 16g installed right now but found out its a fake eBay special is it better to keep the eBay special or rebuild the TDO5H 49178-01450 = evo 1 16g turbo that i also have in a box or should I buy a evo 3...

hey guys so heres another one of the minor problems i wanna fix on my 97 Eclipse Spyder gst, so i have bought this car about 5 years ago and never have been able to use the power locks when i press that lock button on the door panel i can hear a clicking noise near where the radio is installed...

hey guys so im having an issue i had put in a replacement motor in my 2g 4g63 turbo and when i start the car it runs nice and smoth but after a few minutes when the car warms up on idle i get some stong smell and smoke out of the exhaust if i rev the engine at idle more comes out but when i...

Hey guys I'm having an issue my rad fans broke so I bought a shroud kit with 2 12" slim blue fans only problem is my stock fans have 4 wires on each and the new slim 12" blue fans on the shroud have only 2 wires on each how do I wire this so that it can work the same as my stock rad fans work on...

Hey guys I have a 97 eclipse turbo 4g63 with a 16g evo 3 turbo installed is there a way that I can increase the boost I have a palm 3 data longer with the cable and also what would be a recommend safe boost level on a motor with aluminum rad, after market air filter and greedy type s and headers...

*Update* hello there so i finally removed my dash and i think i might have found the problem please let me know your inputs on these pics and what i might need to repair this thanks http://imageshack.us/g/3/eclipsebottomdash2.jpg/Anyone?How do I remove this item?

hey guys when i turn my car on my cel comes on and when i use my palm datalogger it reads code P1105 and says dual alternator upper fault i have no idea what this means or why im getting this :banghead:

Hey guys how's it going? I have A big problem ever since I bought my 97 eclipse gs-t I never had heat working in my car it only ever blows cold air last year I replaced my engine with a new one and also got a aluminum rad and I still have no heat I'm really baffled here with this issue, both...