So I have a Garrett tb2578 or "Big T28" as they call it. The turbine housing is all cracked up and leaking and I wanted to use the turbo on another setup. My question is, is there a turbine housing that fits the Garrett tb2578 with a t3 flange? I'm looking for a t3 inlet to V band or just a...

Has anyone replaced the Hahn s16g's 10cm turbine housing with an 8cm like one of these...

So I got this block basically for free and was just trying to determine what year it was (early/late split thrust etc). While looking, I see the spot where the vin should be, there's no vin... I cleaned it and nothing is there. Were there years that didn't have it? Or did I end up with a...

Has anyone had trouble with the FP manifold not fitting? I got mine (ported and coated) and it won't fit over the studs. I've got my stock manifold and a 1g manifold that fit without any issue, but the FP manifold will not. Wanted to see if anyone had similar trouble.

I've got a 98 Eclipse GSX and am trying to find the best place to put my cutout. I want to run my stock catback (or at least the stock muffler). I have a Megan 3 inch downpipe that bolts to my stock catback and can't seem to find a good place for it. I don't want to have the side exit out of...

So I got a parts car and turns out it had some decent audio stuff in it. I've never been an audio guy, but it's not all completely foreign to me, I just don't know much. I was thinking about putting it all in my car, but need some advice... The Infinity speakers look like components, but I...

I was looking to get a set of Rally Armor mudflaps and was reading the post where the mud flaps for the Evo were used, but others used the universal ones.. So which one should I get? These: http://www.rallyarmor.com/product_info.php/urethane-mud-flaps-universal-mud-flap-red-logo-p-267 Or...

Is there a shifter anywhere that has positive stops? I have a Maddog on my srt and really like the positive stops it has. I currently have a B&M on my 2g and remember reading something about a Dog Box, but I guess they went out of business. Anyone have a pic of one or know where to find or...

So I've been reading that some (non ms users) that are boosting 15psi and up are moving the intake temp sensor to the compressor outlet so it reads higher temps to retard ignition timing... Wouldn't this retard the ignition significantly in the lower boost range and normal driving conditions as...

So I'm looking at getting a set of 18x8 Drag DR63's and I can get them in either a 35mm or a 48mm offset. I was thinking of getting the 48mm and just using something like an 8mm spacer if needed. I am lowered with K Sport coilovers, no big brake kit. What do you guys think? Also, anyone have...

Anyone know where to find some edm spec taillights?

So I've used the Portfueler on a few different 420a's and never used a tach adapter, worked perfectly fine even though I've read mixed opinions as to whether you use one or not. I had an MSD 6212 on my car that I had removed some time ago and was going to re-install. I have the tach adapter...

Anyone know of any gear based boost controllers that are out there? I use a boost box on my srt and love it. I run the portfueler on my 420a and I'm trying to find a way to adjust boost specific to each gear instead of having to push a button. I was hoping maybe there was a controller that...

I'm wanting to run some 10mm spacers and was wondering where you guys purchase extended wheel studs. I know RRE used to sell them, but can't find them on their site anymore, and I wrote them an email a few days ago and haven't heard anything back. Anyone?

I'm wondering how this switch functions. Is there power going to it? Is it just something the ecu looks for before starting? Anyone know the specifics of it?

I just got my car running again for the year and had swapped out the intake mani and am running the portfueler setup. I'm getting code 52. Things I installed were a different missing link (not sure which gen it is), a different portfueler setup (injectors and all) and a different intake manifold...

I have a Hahn turbo setup on one of my car with the Portfueler and Crower stage 2 n/a cams. I know I've read where guys have used the safc to lean out the rich idle, but I was wondering if there were any other products that did that for cheaper or easier. I'm just looking to lean out my idle...

I just got a used Synchronic BOV, it was dirty and some oil had been running through it for a little while, so I took it apart to examine the condition of the O rings and see if there was any debris in it. There was some dirt in it, but the O rings were perfectly fine, so I gave it a really...

So I'm assembling my new motor and I was just gapping my rings... First and second are good to go, then I get to the oil rings.... WTF? They are all too big. Like, I would have to cut the oil control ring just to get it in the block to check the gap.... I'm talking like, 1/8 inch excess on...

This is for the 420a motor. I called the machine shop and they quoted me $8 per rod/piston to install the wrist pins. $32 plus tax for just wrist pins! I've seen several videos of people heating the rod end and icing the pin successfully installing them. I've done this on a set of four...

So I just got around to opening the box to the crankshaft that I ordered from Autozone. This is a re-manufactured crankshaft. Pulled it out of the box and found one of the notches broken off. This crankshaft is useless correct?

Right now I'm running my s16g Hahn kit with the portfueler at 15psi on 93 pump. I have no way of controlling ignition at the moment and was wondering how much can you raise the boost on 110 octane with the stock timing. I'm on a built bottom end with ported head, crower 2's, amm intake mani...

Just bought this car and it has a header I don't recognize... Never seen one that looks like this. Def custom. Is this the LTH (long tube header) design that the all motor guys are after? I'll get some better pics of under the car here shortly.

Here's my newest 2g. Previous owner skipped timing and bent some valves. I just need to replace the head with one of my five spares lol. Pretty damn good deal. I'll get some better pics later on. Came with an aftermarket header (long tube?) Body is in really good condition minus the driver...

So I'm building an all motor car (420a) and the time has come to buy something to help on traction. I don't have the money this summer to buy an actual helical lsd, so I was looking at getting one of the inserts. There's a guy that has a Phantom Grip #904 gold lsd insert that he is going to...

Was wondering if anyone was running a fuel cell in the engine bay. If you have pics post them up or explain what you did. I'm thinking of sticking one over there the overflow/ps res used to be. Not sure yet though, this is for my dedicated n/a drag car.

So I was looking for some input here. I am looking for some drag wheels for my all motor 420a and was trying to narrow down what would be best. I was thinking some 13x8 Bogart Fly Star wheels would be perfect, but I'm having trouble finding some good used ones and don't want to spend the money...

I was kind of looking at a set of RX-7 spare tire/wheel as a skinny for the rear on my all motor drag car. Anyone else have any budget rear skinny recommendations? What are others using? I know there are Weld Racing one's, buy they are spendy! :)

Thinking of getting an AFX ecu for my wife's mtx 95. I was wondering everyone's thoughts of doing this as a plug and play vs running ms2. I don't really have any experience with ms2 yet, so I was thinking of just throwing an AFX on there and being done with it. Here's the mods to the car...

I'm wondering if All Motor Mike is still around? I sent a few pm's and emails about getting an intake manifold from him without any luck... Anyone know how to get a hold of him?

So I've been browsing around and seen some of you buying the Lexan rear hatch and side glass, who's done it themselves? How did you form it to the rear hatch? I am looking to do this for my 2g track car. Also, has anyone done polycarbonate driver and passenger windows on a 2g? If so, pics...

I was looking for someone who has mounted a set of srt4 seats in a 2g. I know someone has done it, I just wanted to see some pics and some details as to how they mounted them. Post up any info you have! :)

Thought I would share some pics of the decals I just got done making for my 2g.

I'm doing a stock rebuild on one of my 420a's and was just wondering, how do you inspect the modular clutch? I am out of town at the moment and was just going through a checklist in my head so I can't physically look at one right now. They are riveted together, so how do you inspect it? I'm...

I'm rebuilding a stock motor and need to bore the block out .020 over... I can get a set of .020 over Topline pistons with rings for $100.... So, should I do it? I can't find any real feedback on that brand of piston for the 420a. Anyone had any experience or helpful feedback? If no, what...

So I'm in the process of tuning my Portfueler. I have Accel 410cc injectors. I was wondering, does anyone know what pulling .1 millisecond will reflect as far as the afr leaning out? Basically, how much fuel can I pull to reflect -.1 afr? I just want to get an idea of what to expect. Right...

Like the title says, looking for a picture of a matte white 2nd gen eclipse.

I bought a 2 step and wot box from n2mb.com and I'm wanting to wire into the clutch switch. The wires under the dash are way up in there and was wondering if you guys tapped for the signal somewhere else that's more accessible. I unplugged the harness to it and was going to possibly tap that...

So, I have this 420a I'm rebuilding and I got to looking at the axles and am wondering if they're aftermarket. They look new, but I don't know if they're stock or not.... It would be cool if they were dss lol. Any way to tell? Here's some pics. I've never seen the silver, but then again, I...

So I bought some Crower 2's from used from a guy that seemed pretty legit, I'm just wondering if they are scored a little too much on the bearings..... How much is too much? I took pics of the ones that catch my nail the most...

So I picked this 95 up for $200. The clutch gave and the previous owner did not want to do the work I guess. He included a bunch of free parts and a spare manual trans. Totally worth it. I'm going to restore it. You won't recognize it once I'm done.. Going to paint it black and rebuild...

Was wondering if anyone has used this manifold. I got it for free and was wondering if it would outflow my Hahn log mani. It is obx, but it has the flange on the bottom instead of the top like others I have seen. It actually doesn't look too bad. I'm not sure of fitment since I haven't test...

I am 420a turbo'd, will I be okay using the screamin demon coil and a Msd dis-2? I couldn't find anything about using both so I'd rather be safe than sorry and ask.. Thanks

Hey, I'm about to go to the track and run my car for the first time being boosted. I am currently spiking 15 and settling around 12 to 13ish with afr's ranging from 11.2 to 11.6 My question is, can I raise the boost with 100 octane race gas to 18 psi and be alright with stock timing? I know I...

Hey, I was browsing around and reading that some use an oil restrictor on the oil feed line to the turbo. I have a 16g and was wondering, should I use one? I have a Melling oil pump (the highest flowing one). The feed line is a -4an ss.

Hey, usually I find everything I need searching, this is one of the few posts that I have started. I just bought a Hahn Portfueler and was just wondering if there was a how to anywhere or how I would go about tuning it. I haven't received it in the mail yet, but it does come with instructions...

Hey, havn't posted here for a while, but I just wanted to share my plans with everyone. I have been following Mark's progress with his all motor 2gnt for a while now and just wanted to say what he has done is absolutley awesome. I currently have my red 97 and have nearly completed it as far as...