I are the Metal Masters good for a Daily driver. Because I've heard that they aren't good until you warm them up a bit. And that it takes more pedal to get your car to stop?

So when and where is the next meet.....And whos gonna go!!!!!!

I found a crack in my rim after noticing a flat. So I took it to a local wheel shop and they said that they can weld it for $100 and guarentee it. Well, is it pretty safe to weld the rim? I would buy a new rim knowing that it would cost that much more, but the discountinued the rims that I...

So whats up we gonna meet up or what let me know if you guys are willing to show up...I'll be back from hawaii this weekend so saturday nite i say we hit up the INnOUT on sahara @ say 9pm.......let me know whos gonna be there?

thanks for the reply....how much did you pay?

Hey whats up, Im pretty new here in Las Vegas and I know theres a car shop in just about every corner. Its about that time to change my timing belt. The dealership charged me $485 just to change the timing belt, and $800 for all belts and tensioner. I can afford the timing belt but I really...

Hey Whats up too all you LV dsmers! Man, we haven't had a meeting in a bit. What happened to IN AND OUT on Sahara. Well, I just got my car back from a fender bender and Im kinda having some problems. I was hoping someone here in Vegas could help me out. I need some help and a reference from...

Thanks for the help, can I do the pressure test myself, or would I need to take it to a shop? What did you have to do to correct the problem? and How much did I cost to run the test and fix the problem? I really apreciate the help! Joe

I just got my car back from a front end collision, and had to replace my damaged OEM intercooler, so I replaced it with an APEXI FMIC. And now Im having a problem, my turbo seems to open alot quicker and doesn't pull as hard, and everytime I try to "punch" my car it pulls back. And im planing...

I need a good alarm, Las Vegas in going import theft crazy. Which alarm should I go with.1)Compustar 2WSS-AS Alarm & Remote Starter2)VIPER-791 2 WAY CAR ALARM REMOTE STARTER or VIPER-7903)Audiovox Prestige APS996a Car Alarm APS996or if any one has suggestions, let me know. One...

What i was trying to say is that you have the answer right in front of you. All you have to do is put some effort and lay down the pipes.I don't have the pipes here to lay it down piece by piece to make it easier for myself thats why im asking for help because the pipe are at the shop...

I you weren't trying to be a wi$e a$$ then you would have to add "you have the pipes" over and over again. Im not an idiot the kit was brought to a shop were my ride is at, and the shop is closed so I thought i would take the time as see if the fourms can help me out since all the pipe are at...

I just received my Apexi fmic kit and I didn't come with any silicone hoses(couplers) to connect the piping, so I was hoping ya'll can help me out with some info.1)How many silicone hoses(couplers) do I need?2)What diameter hoses(couplers) do I need?3)What different types of...

I just received my Apexi fmic, It looks great! I opened up the piping box and found that there were no couplings or clamps and no instructions...Does anyone know where i can purchase some couplings and clamps and i also need the sizes of the couplings that I need and how many do i need for my...

This is the radiator hose that i want to slap on....please let me know your opinionshttp://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33601&item=2450138600

Hey Everyone...I just wanted to know what the length is for the upper radiator hose on a 99 Eclipse GST....please let me know, THnaks Joseph

Okay Ive almost all if not all the threads on the Invader hood and Im hoping that its all cleared up by now and if I can get some results...Im looking to purchase one for my 99 eclipse GST....and I hope you can tell me if the hood fits w/o mods or is it to close for comfort? and if the vent will...

Im also thinking about getting a Invader hood for my 99 Eclipse GST...so hows your buddies ride with the invader hood on there? Is it fine or is the hood and the cover too close to comfort...please let me know, Joseph

Project Talon130....Thanks for the reply....I got a good price for either of the two the APexi or Big Greddy, but your opinion the the looks of the two...what you think. I got a Drift Front bumper.Any More Opinions

Im stuck between chosing the Apexi Fmic or the Greddy Fmic....And I was hoping to get the pros and cons on both and your opinion on which what i should get...I've done my research on the both, so now I thought I might ask for some direct answers....Please let me know, Im ordering on monday...

I love those Chin Spoilers/Lip from Rmdsm or the CF one by GSXtcy but Im really worried about purchasing one because of the stories of them cracking and snapping. Im realling leaning to purchasing one but i wanted to ask you Lip owners, how long have you had yours on? If yours broke how long...

Hey everyone, I was hoping I can help some help. For about a week now I been hearing this thinking sound coming from my engine, I think its somewhere near the intake mani. The ticking sound would come on and off on idle. The car works fine but this ticking sound got me worried today...

Im looking to purchase one of those front lip spoilers soon, but Im still undecided on which one. So I was hoping I can get some advice or suggestions. I know that the Carbon fiber one looks alot better than the ABS plastic one but, which is more durable? I would think that the plastic one is...

Im not to sure if i should post this in the classifieds because im looking to buy rims, but purchasing them is not my main concern here. The purpose of this thread is to ask for everyones help on finding these rims, the TSW Pin Drive Zenon 19 inch....I can't seem to find them at all, I've tried...

Hey thanks for everyones help i just received my Larsons kit, and not im not to sure which hose to replace or shouldn't be replaced? Can anyone help me out, and provide a picture? Thanks again, Joe

Im loving my Apexi N1

Well, i got it right at the middle, i think, but it seems to run good

Turbo timer...but make sure you set your alarm to it, cause there would be no point if you have to wait to turn your alarm on

I was hoping someone can tell me were i can find red vaccuum hoses for sale in a local car shop, if not a website. Thanks, Joe

Well, i just got done installing my HKS SSQV and sad to say its vented, but Im planning to purchase the recirc kit sooner or later, but right now no idle and stalling problems. I just wanted to know if i need to do any adjustments to it or is everything set once installed? thanks, Joe

I was hoping someone would have a link or something to the sound of the HKS SSQV recirculated. I've heard the other link were the hks was vented and i sounds great but i don't think im planning to vent. Joe

Im probably the most happiest guy with my Tein SS...I would recommend it for everyone! Save up your money, its worth it! None of that boncey shiz, and GREAT handling! You can't go wrong

Nope sorry not yet, im just hoping my extended warranty covers it! I'll keep you posted

Does the SSQV come with the recirc kit already, cause thats what the guy I bought it from said. And if i do decide to recirc it how is the sound of the bov? any at all? If i were to vent it for a long time, will that damage anything since im running rich?Is it pretty hard to install the...

Hey everyone,I am really lost, I have been reading all the threads about the SSQV and I've heard good and bad. Im getting kind of worried about installing my HKS BOV. Well, I've heard bad things which worries me, like, that if i vent it, I would run rich. Now i don't know if that...

I got them on my car now! and boy am I hitting them corners! They are great. I made a mistake on my earlier post, i meant to say 1.7 front and 1.5 rear....and thats where its at...I also have them set at 8, but im not to sure if im going the right way.SENTIAL, do I got up the numbers to...

I put on my Tein SS tomarrow, I can't wait! Sential, I just wanted to ask you if you had the upper mounts? And also what would you suggest for the setting? Im wanting to go 1.5" in fron and 1.7" in back. And with the numbers, 1 would be the softest and 16 stiff? and for a good smooth ride...

I was also looking for a good low tone, when i first posted this tread, and I was hesitant in the n1 cause i haven't heard it on an eclipse but, i took the chance with the N1 and im loving it....go for the apexi N1 its sounds and looks great!

I know that the timer adjusts on how hard you drive your car or how long you drive, but you also must have a minimum set time, and i just want to know what should i set the minimum time for?

I recently installed my Greddy Turbo timer and set my stock alarm to come on while the timer counts down, so what minimum time should i set my timer for? thanks, Joe

Hey Everyone, Im hoping someone can help me out! I recently installed a Greddy TT and it works fine, but after two days of having it on, I took a long drive home and tired using my cruise control but it wouldn't work. The orange light on the button would come on and stay on but not the...

I just installed my Injen intake and I was just wondering if I was suppose to take out that black rubber piece that was around the inlet of the turbo? I took it out but i recently put it back on and manage to fit the injen right over it....does it matter if its on or off? And i also just add an...

Hey thanks, I'll get that done asap, glad i don't have to pay no three bills for something that simple. How hard is it anyway to remove that door panel? can i find any instructions to help me out. Thanks again everyone!

Im soo mad at the Mitsubishi dealer here! My window control panel on my driverside door fell into the door, its like flushed with the holes and if i press any of the buttons on there the panel just sinks down. So i drove to the dealership and told there to take a look and if they could pop out...

I was just wondering how do you guys change the center tail light piece to match your car? Do you use paint, or a Vinyl sticker? If paint, what kinda paint is preferred, for my silver eclipse? and do i have to remove the center piece? please let me know where i can find instructions to...

i was reading the other thread about greddy or apexi...and it wasn't really clear to me the advantages that each one display only because the fact that his car was a NT, and that was more of the talk. but my question is pretty much the same but for my GST. I at first thought i wanted the Greddy...

thanks, for the needed advice...well, at least i know its safe! but i am eventually gonna pick me up a K&N filter if i don't decide to buy the injen intake soon. thanks again, Joe

I just purchased a cheap filter for my spyder and installed it recently. I just got done reading a post about bad filters that don't keep out dirt or debris. Would that be something to worry about with my cheap filter? im just worried because i got a long drive coming next week, and would...

im glad that im not alone in my quest in finding a smooth ride, i appreciate if you guys let me know how it turns out! or if i get them on my car, i will be sure to let you guys now about it. well, keep me updated, thanks, Joseph

Hey, I've been in doing alot of thinking about and asking but never really came to a conclusion. I hope you guys can help me out with your experiences. Im looking for a smooth ride, i don;t want every little bump and dip throwing me around inside my car. Im now looking at some ground control...