Hello fellow tuners and boost heads, I come to you guys for a little input from the guys that have been in the game a long time.Back in 2013 I had purchased my fp hta green, fp race manifold, fp feed line, fp inline filter (red), fp blue drain line all at the same time. Now I did not use this...
). Any boost, vac, or exhaust leaks?
Boost leak tested 5psi above your max boost with no leaks? not since startup2). Verified mechanical timing?yes3). Verified base timing?yes4). Ignition system
COP or Stock Coil:stock coil
Wire brand and Age:innovative lc1, sensor is 8 months old
Spark...
Ok guys so my new motor came with a water pipe that has the original coolant lines cut and welded up because the owner before me did not water cool the turbo and had a foward facing ofh. Now my hta fp green that's going onto my new motor needs to be water cooled.. can I use the circled lines to...
Ok guys so my stock 140k 7 bolt had enough and I'm currently awaiting my replacement motor...here are the specs on the engine...mahle pistons, eagle rods, eagle forged crank, the head has jun springs and the rest is stock. I will be installing my fp2s out of my stock engine but I want to know...
In checking to see why I have no 12v to my stereo, why my heater doesn't work and door locks don't work (checked fuses, relays etc). Fuses are good. I pulled fuses and checked with a test light with the key on and off. I found this blue plug under the carpet close to the fuse box. I have no...
Ok fellow tuners I have a really quick question concerning the narrowband simulation on ecmlink v3. I have a brand new Bosch o2 in the front location that does not oscillate, my innovative lc1 is in the rear location and wired into ecmlink to the rear o2 pin. Here's where I run into trouble, to...
Hello everyone, first off let me say this is one of the best and most helpful forums for our platform. With that said on to my question. This past Saturday I had my 2g talon remote tuned by taptec tuning, anyways my mod list is current and here's how she did. I have a 13.5 psi spring and it's...
hello dsmtuners, let me start out by saying that i have always had a honda and always enjoyed working on them, i have learned a lot about cars from my experiences with them. I have done anything from timing belts and clutches to motor swaps and turbo installs. How i was introduced into the dsm...