Hi guys. i bought a set of HKS cams from a guy almost new , but the cams doesn't have any number for ID. The only numbers located int he exagonal areaof the camshaft is "464" in both of them. Any idea??
hey i have agood edal in 4 2003 evolution connecting rods, and i want o know if somebody hane an idea, if this ones fit my 2G 1997 7 bolt crank. i hear this rods are more stronger than the regular 2G rods. please letme know
hey guys i need your help, anybody have a technical drawing, or have idea where i can find it?. It have to be the 4g63 crankshaft, or could be another one only i need to use as reference, thank you.
Hey guys i just went to the junk yard today, and i found a mitsubishi pick up with a 2.6L engine , i was comparing the engine with the regular 4g63, and many parts are interchangable, and the best, is that the bell housing is the same as our transmission, i took the steel plate from the engine...
I need some advice, I went to the junk yard today and found a 1992 eclipse, pulled the engine, when I pull the clutch , my surprise there were 7 bolts in the flywheel, and the block is a 6 bolts,I pulled the oil pan and the crank is like the 6 boltcrank, also the mains, and I was impressed...
hey guy i took today mi car to the track after i put on it a set of brian crower 280 with springs, i just got the las version of MAFT, im still running the 450cc injectors, and a stock 14b turbo. Also i have the black top CAS conversion because im running actually a 2.4 6 bolt with a 2g head...
hi guys i have an 1993 eclipse gsx, butg the ECU fried, friend of mine is selling me a 1992 ecu but i have adoubt if it work in my car, of course is a manual transmission turbo, i have the numbers, the 1992 is MD166262, and the 1993 thta is bad is MD193299, thank you very much if you can help...
men... time for replace the front rotors, and this ones are stuck as hell in the hub, i tryed hammer, torch, WD40, chissel, puller, electric grinder, massive atacks with a 10 pds hammer, and nothing, already mess 3 studs, please any body have an idea how yo pull this ones from my car. the...
do you guys have any pictures os a thermostat ported or a ported watr pump, i heard with all this work the engine keep the temperature more below ,and the hot coolant go out faster , and get faster in to the engine, thank you for your help...
i just bought a maf translator version 2.02, and a 3 inches gm maf, im running with the 450cc injectors and all the rest is stock , do you have any idea about wich is the best posistion en the base knob adjustment, and the idle knob, because im having hard time tryng to set it up. Only give...
any sugestion to convert the spring rear suspencion in my 2g AWD, im asking this because i think tis woul be a very help full way to remove the struts with springs, and replace them with a solid rods, so by this way, there is not to much lost for the pressure in the rear side of the car, and...
i used 3 times my arp head studs, do you think is a good idea tu use for the 4th time again or shoul i buy a new set? i puleed my head already 3 times with the same and i don't know if i should doint a 4th time thank you.
does any body have any idea to fix the window ratling, in my driver door, it look thats a comun problem in the eclipses, when the glass is half way, this one make alot of noise.
hey guys y just blew my rear end, and it seem that i can't find one no where i tryed ebay, junk yards, recyclers, and nothing, any advise or idea? mines is a 1995 gsx M/T thank you.
after i done mi head job and new piston rings, the cilynder #4 is dead, y replace the spark plug wires, the spark plugs, i interchange it to, change 2 set of injectors, check the compression and all cilynders are almos even 178 psi, checked the voltage to the injector plug and everithing is...
i came from the track today and i notice that i have oil in my reservoir, but the engines look thats is runing fine no everheating and no coolant comsuption, i drain the antifrezze and put water on and still the same issue, i dont think is the HG?
i have this crazy idea t instal the engina in longitudinal posistion with and supra transmission and keep it real wheel drive , i saw in ebay the bell housing for the 4g63 for supra bell housing and i think this will be a cool proyect. im opne to all the ideas
Yes as the tread say i have a 1993 eclipse N/T, but i want make the conversion to Turbo set up, , the question is, do you guys think is nesesary to replace the wire harness? i have the turbo ECU , the turbo engine, that only . the question thank you