hello friends the last saturdays i put a new rear diff in my dsm is a rear diff with 22 splines LSD but when i see the bad rear diff this are 23 splines. Are difference in this two rear dif the number part is the same, but when i drive the car when i turn to the left o right the rear wheels...

ok, today I change the rear differential and axel because are bad, the new rear diff is good but when i turn to the left o right the rear wheel feels like lock up and the anti lock light become on and dont know if the abs system lock the tires or are another thing.

hello my friends of dsmtuners, i have this problem recently i put to mi dsm 95 gsx rear diff bushing but when i use the car and i turn to left o right feels like the rear wheels lock up, because that i decide down the rear diff and open but all things are right, put again the rear diff and i...

Hi im build mi car a few moths ago, the engine is working excelent¡¡ but today I use the car and hear a hard noise back my seat i stop the car and see under the car and see the differential have some smoke and noise, I dont know what are the problem and if need service oil de tranny/differential...

ok, the engine was start the last week but know the ralenti before are in 1,000 rev and know is not estable.here a vid/watch?v=2CzxQpo3GlM

Hello my friends, I want to know what wire are this then i find desconected maybe this wires make signal for the ECU o are important.Thanks for the help

Ok my friends, i build a 7bolt head with a 6 bolt block, we install the CAS 1g 92 (green color) with the harness 1g 2g adapter from ebay and we swap the plug spark wires and change the position of the pins 1-14 14-15 and 15-2 i have injector signal but i dont have spark, and today I see that the...

Ok my friends, thanks for all the coments for my build, 7 bolt head and 6 bolt block with forge internals. The car is ready build and ready for start but, today we want start the engine and move de car but dont start, and don't see ignition in the coil plug and the spark wires, we put a CAS...

Hi everyone, this is a DIY i doit in the weekend, this are the pictures.this is the initial valve cover with out paint.Later we paint the first partnow the red paint for the headand finally here is the valve cover ready to put in the engine bay.y el...

Hi everybody this is my proyectGnNkhpqUuLY

Hi dsmtunermaniac i have this 2 turbos and i want to know what turbo is better for my dsm gsx 4g63t 1g internals forge and 2 head.This is the firs turbo TD05H XS Power ar .70 i want to know if this turbo is good or bad turbo??And this is the second turbo a Garret t3t4 ar.43...

hello my friend's of dsmtuners i have some questions about how much hp's i have with rods 1g eagle forge and 2g pistons wiseco, i read them i have overside the rod 1 mm for match the piston 2g but i have afraid broke the rod when i have put in the engine a average of 400 hp's or how much is the...

hello my friend's i come to coment my problem, i have a dsm 95 gsx stock, with boost controller only and 12 psi in the turbo, yesterday i here this soundwhat can be the problem? :cry:

hi i buy a gsx 1995 here in my country guatemala, the car is very good, and is stock a have problem with his 1995 GSX.he running good everyday, but I went to the 1/8 mile track and a week after the GSX started acting a bit crazy. when he goes hard on the gas and about 6.5k rpm the car cuts...

hi I'm racker I'm from Guatemala, I have 26 years old, and I have a DSM Eclipse GS 1996 420a engine stocki found this page many moths ago, but i don't post anything because my english es very short ROFLthis is my baby:

Hello my friends, i'm from guatemala and i have a mitsubishi eclipse 1996 gs is my baby and i want know information of the car modifications, tuning. etc.