Any boost, vac, or exhaust leaks? Boost leak tested 5psi above your max boost with no leaks? Small injector leak 2). Verified mechanical timing? yes 3). Verified base timing? yes 4). Ignition system COP or Stock Coil: stock Wire brand and Age: dont remember Spark Plug brand, type and Gap: bpr6es...

HiI recently swapped my GS to GST with a full turbo engine. The harness I added some wires to the ECU. Car is on open headers as you can see in the video.Sound goes away once it started. The timing belt has a small streak due to a longer oil pan screw that has been fixed...

Hi, I've searched the forum. I have a 92 GS that I full turbo engine swapped. But I am retaining my NT harness.The plug for the turbo MAF is different than the one in my NT. So I wondered, can I in the meantime use my NT plug and NT MAF in my turbo setup (stock 13g turbo with 6260 ECU)? The...

HiI have a 93 TSI awd with ECM link. I used the BLT tool to identify any leaks. The Biss isnt leaking. My ISC has good coils 32Ohms on all. The only leaks I have are the dipstick, the valve cover half moon gasket and an uncovered valve cover nipple that leaks. My EGR and FIAV have been...

HiI have been fiddling around with my gearbox install on my 92GS 4g63 It is heavy and I gave up after fighting for 3 hours.I bought this turbo gearbox 90 tsi, because the guy told me it will fit. I have plans to go turbo this year. But I need my good on gas daily back for a while. I...

HiJust wanted to let you know that i've been using xtreme fuel treatment for about 2 months now. I noticed a increase in my gas mileage. I was supposed to fill up 10ml of the product to a full tank. I got over 30 miles extra on a tank. This thing is nuts bro! Its on my n/t.I read that it...

HiI have a 1993 awd talon with a good ECU, 2G maf,880cc and a FPR 255 wally. Today I did a 3rd gear pull up to about 6K because I was scared of going further. I knock about 7-9 degrees at 4-6K. I am really scared. My base timing is correct at 5 degrees at idle.Can anyone look at my log...

HiFirst I would like to add that I have searched every horn topic on here. With no solution to mine. My dad has removed the Alarm system from the car. Just removed the honk on firewall and took out the relay above the driver kick panel. I need to pass inspection and I need to have it working...

HiThis is kinda DSM related, because the money I will get I will pump it into my DSM like last time. As you can see the video has had over 3 mil views. There is nothing special happening in it. I cashed a check of 1000 dollars just for people viewing this. My car is still!! not driving I...

HiI bought black clear headlights. But there are small dead bugs inside of it. Is there any way to wash them out without removing the lens? I'm planning to put hid so I would want a no residue product

HiAfter smoking at idle and high rpm for about 4 months I decided to buy a compression tester. For cylinders 1-3-4-2 the results were all about 120 psi the lowest was 118 psi.When I looked into the spark plug holes I saw that the pistons were covered in carbon or some other kind of...

HiAfter smoking at idle and high rpm for about 4 months I decided to buy a compression tester. For cylinders 1-3-4-2 the results were all about 120 psi the lowest was 118 psi.When I looked into the spark plug holes I saw that the pistons were covered in carbon or some other kind of black...

HiMy car is a 1993 eagle talon awd. I have fought with this issue for quite some time now. I have ECMlink and my Engine coolant temp sensor reads anywhere between 34 and 200+ degrees. It jumps when i throttle the car. I have checked various online manuals like...

Dont know if insurance covers this hahahaha.Yogi bear

Street Racing: Pedal to the Metal: Part One - YouTubePretty cool. Four parts

HiI was reading FAQ on plymouthlaser.com how to rewire a fuel pump. Because i think mine is either bad or does not get sufficient power. I set the FPR to 37 with the vacuum line plugged. Realtime it went to 35 psi, when i give gas the car stalls and the pressure one the gauge goes to 37-38...

HiToday I was struggling for about 1 hour trying to get the clutch pedal assembly out. I managed to do it without removing the brake booster,BUT I loosened the master cylinder part of the assembly which hold a spring and lever. It seems the lever is worn and will need replacement -or welded...

HiI recently swapped out both my master and slave clutch cylinders. I measured the stock master cylinder pushrod and duplicated it. So it should all be stock. After bleeding the clutchlines a few times. The pedal still has about 10 cm travel. I looked under the dash and noticed that the...

2012 Jeep SRT-8 vs Eagle Talon TSI - YouTubeJust found the vid. LMK what you think

HiI was setting up the TPS today. Was reading it with v3 full while adjusting towards 0.63V. I managed to get 0.65V on idle on TPSvolts. I still get a DTC code saying bad tps circuit or something. Could the 0.02V deviation be causting this?Also for some other codes ive been getting...

HiToday I did my first log on my dads talon. First off, It idles at 1K rpm even though i set it to 750 in ECMlink. My TPS reads high(4.75V) when it gets to a certain stance. Would the TPS be bad? Or do I have to adjust it. I have a 2G unhacked MAFMy airflow per rev is too low too. 880cc...

HiI am looking for a nice tire set that will give my red talon a good look. Somewhat aggressive. Always wanted to put evo 8 or evo 9 rims on it. Let me know what you have, pictures are welcome. Thank you

Hi I have been looking at coilovers this whole day. Kind of researching which one suits my driving style. Right now the talon is on stock suspension and has about a hands length of fendergap. I want to lower it about 3 inches while retaining a good camber. The car will be used in drag racing...

HiBeen searching for decent rims 17 inches for our red awd talon 1993. I have a list of rims made by "Drag" which have pretty respectable reputation for a low price. http://www.dragwheels.com/collection.asp?CatID=50 Which ones do you think would stay nice on the talon? I was thinking...

HiToday i removed my gearbox off my 1G 4g63 because the car didnt go forward anymore. It turned out that my clutch plate was peeling. It has no meat left. The peeling fabric could be found all over in my gearbox. I have a few pictures to show. Its a Ebay Gripforce F1 clutch stage 1. Should...

HiYesterday i received my reverse glow gauges from ebay. But it did not come with a installation guide. I think these faces light up by themselves instead of using a backlight if im not mistaken. So should i take out all the backlights?I took some pictures. The face plates all have...

Hi GuysMy girlfriend is through to round two:hellyeah:. Will need as many votes as last time.:pray: Votes are appreciated. Vote for her here Thank you!!:thumb:

HiMy girlfriend is entering a miss contest for miss "beer". She needs the votes really bad. She is neck and neck with another girl. You can vote for her at Miss Amstel 2011 She is #9 Jennifer Kolker. Best looking one in the bunch. Any help is greatly appreciated. Just click on "VOTA" to...

HiMy dad and I have a red 93 eagle talon awd. We are looking for some 17 inch rims for it. I came across a nice one on ebay. Its called a "Drag Dr-31". Its a sort of replica of the "Work Emotion Kai". Its cheap and half the price of the real thing. Do you think this rim would stay nice with...

HiI have a question about where to put my stock coolant overflow tank. We installed a punishment racing FMIC kit for a 93 AWD talon. But the pipe that goes back to the intake manifold disturbs the coolant overflow tank from being put in the stock position. Does any one have an easy fix...

HiI found a 1995 GST for sale,but the body is shot. I asked the guy if i could just buy the 7 bolt that is in it. Since my gearbox is gonna be shot soon. Can i use his gearbox to switch into my car together with his engine? Thanks

HiBeen looking to buy HID for my stock eclipse 1gb headlights off Ebay. It isnt a popular choice. The reflector in these headlights are made for halogens. If i put a hid kit on it. It wont cutoff nicely and aim on the road? I only saw 1 picture of a 1gb with HID in the photogallery.

This is so sad, to see a built dsm go down the drain like this. Take it to the track!! 600 hp dsm vs 700 hp turbo mustang - Car Videos on StreetFire

HiMy dad has a 93 tsi awd. Im posting this for him. He has a punishment racing fmic kit on the car and a big 16g turbo. He needs somewhere to connect the wastegate line. The kit is made out of aluminium and he doesnt want to weld a nipple on it. What should he do? Is there another option...

What you guys think of this car? Im liking the bodykit. YouTube - ‪Elmia 2010 - Lukas Kooz (Zpirit)‬‏

HiFirst i want to start by saying that i tried finding the best way to convert my car into turbo without it breaking my wallet.A full engine swap (ebay engines) is going to run me too much +- 1500 dollars. I have about 400-500 to spend.So here is the deal, with that amount of money i...

HiI have been having this issue with my dads 1Gb Talon tsi awd. We have ordered a Eprom ECU and he installed DSMlink v2 himself. The car was working fine last week.Last 2 days i have been trying to connect the DSMlink software with the car. Everytime i get a IO command timed out. I am...

What in tarrrrnation!!?? Corvette taillight mod. Custom headliner. Piece of art? Comments please

HiA year orso back i ripped my crossmember that covers the power steering rack. This island has a lot of bumps in the road, speed bumps everywhere. I guess all of that took its toll on it.Just thought i'd share some of the pics with it still under the car. I fixed it by sending it to a...

HiI've searched the forum but couldn't find any pics of the underside of a 1Gb awd. I have puzzled for the last 2 hours on how to install the L shaped panel that goes behind the front bumper somewhere.Does any1 have a picture of a full OEM paneled engine undercarriage 1G awd dsm? Thank you!!

HiI am looking to buy a clutch while my tranny is out for repairs anyway. For my 1g GS.Been looking for a cheap solution so i went to ebay. Keep in mind that my car is mostly stock and doesn't rape the axles like the turbo 1g's do. IHE are my only upgrades.Now i have been planning to...

hiMy dad bought 2 fuel rails.First the OBX one,then another one that had a bigger inner diameter.So the OBX one is on the shelf. I thought to myself.Why cant i use it on my N/T 4g63 then. Does this do any good performance wise? I would like to know. Thanks

HiAs you can see i still have my 92 GS. Im going to Miami the 3rd of July and i wanted to save some shipping costs..So I am planning to buy some stuff i'll need when i buy the turbo engine.Since im buying an engine without tranny i will get some stuff but.. I already have. SMIC and...

HiI changed my AC compressor after a gas refill with 134A gas,### the belt was slipping,so the compressor got stuck.I changed the AC compressor again! refilled it with 134A again,and it got stuck again.So my question. Does refilling it with the wrong gas make the compressor jam? It...

HiI bought 2 H3 bulbs for my foglights.They are ebay ones by HNG 100 watts. did some searching on 100 watt bulbs on foglights,and they said the wires might burn.What do i need to do to make these compatible with my foglights,so that everything stays safe?Thanks

HiA quick yes and no questionIs the subframe that holds the steering rack from a 1Ga the same as a 1Gb? I need to buy another one,so can i put in a 91 eclipse subframe into my 92 eclipse fwd?thank you

HiI am doing this to do my dad a favor. He has a 1993 talon tsi awd, he bought a punishment racing fmic kit and some ebay injen style intake for the turbo.A big 16Gmhi,stock exhaust manifold, he also has a 2g MAF installed, but now the length of it is long and there is no room to put a...

Hi I was just wondering if any kind of 2G radiator fans will fit on a NT 4g63 with stock radiator. Will the 420A radiator fans fit? How about the 2G turbo ones. Am looking for a bargain.Thank youAre all the fans really loud like the 1G turbo ones? Had it on my car for a while, you could...

Hi guysRecently i've been scrolling through ebay and saw a set of NGK iridium IX for 89-94 non turbo dsm. That is what they say Now i want to buy these, because my car idles really ugly when i just finished racing.It could be the hot air the filter is sucking (box removed).But it can also...