The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support STM Tuned

Search results for query: *

  1. racersedge1821

    Best turbo Setup for the 1g auto awd 1/8th mile

    well i'm not gonna be street using my 91 gsx it will be track mainly and ever so often street driven i'm leaning to the hx35 for more topend i forgot to mention i have 280 cams so the 16g won't even benefit from them. i was just curious if the stock converter will be able to spool the hx35 at...
  2. racersedge1821

    Best turbo Setup for the 1g auto awd 1/8th mile

    i was gonna run the big 16g with this auto awd car but i already have a 98 gst with a small 16g and its fun on the street but i'd much rather have some more hp numbers with the hx35. I've been talking to a few ppl on facebook that run auto awd cars with bigger turbos and they say the stock...
  3. racersedge1821

    Best turbo Setup for the 1g auto awd 1/8th mile

    What about sending off this 16g and having a 20g wheel and compressor installed?
  4. racersedge1821

    Best turbo Setup for the 1g auto awd 1/8th mile

    I have two turbo options this year for my local 1/8th mile track. i have a built 8:8:1 forged 6 bolt with BC 280's,and FIC 850 injectors and i just recently put this engine into a 1991 eclipse GSX automatic car with fresh rebuild on trans and stock converter. What my question is should i run my...
  5. racersedge1821

    Starting issues - No / Doesn't / Won't Start - MERGED

    I got up the other morning to start my car and let it warm up for work. I started to walk back inside and the car just shut off like someone was inside and cut the key off. I got back in the car and tried to restart it and it made a huge backfire out the exhaust and acted like it had no...
  6. racersedge1821

    What will i expect with this new turbo setup?

    I currently have my hx super 40 t4 19 cm housing twin scroll with a custom made twin scroll t4 manifold with twin tial 44 mm waste gates and two dumps. I traded this whole setup to a buddy of mine for his 7 blade hx35 twin scroll 12 cm with a open t3 style tubular manifold with a single external...
  7. racersedge1821

    98 GST Hesitation under 3k RPM and cruise control

    The car had a 1995 style cam sensor wired into it so i had to do the rre wire swap on the ecu mod.the same one that you do if you put a 1g CAS into a 2g rewire without link
  8. racersedge1821

    What do i set my two step and antilag to with a hx40 (super)

    I have a 1995 Gutted GSX engine is a forged 6 bolt 1g head bc 280's and bc valvetrain holset hx super 40 with 19cm exhaust housing been messing with launch control settings and what would be the best setup settings for both anti lag and two step to get me some good 60ft times? I currently have...
  9. racersedge1821

    98 GST Hesitation under 3k RPM and cruise control

    I just read a post where a person used a 1995 CAS in a 1998 car and ecu the injector wire had to be rewire/pinned and if you don't do the rewire the car will stumble and miss that is EXACTLY what my car is doing where is the fuel injector rewire post i can't find it anywhere.Will they be...
  10. racersedge1821

    98 GST Hesitation under 3k RPM and cruise control

    Here is a kicker i also have a gsx (race car) on v3 link i took that ecu out and put it into my gst and loaded the stock 2g settings and it stopped the hesitation and pulled way better. But i have tried a stock ecu from a buddy and it did the same thing? it only quits when i run dsm link on...
  11. racersedge1821

    Firing order for my 1998 GST with a 95 CAS?

    My 1998 GST has a black box style ecu and has a 1995 cam sensor (under the intake gear) was curious what exactly is the way the spark plug wires go from the engine to coil pack?
  12. racersedge1821

    98 GST Hesitation under 3k RPM and cruise control

    never thought of that i'll try the battery swap in the am i know when i had link hooked up the alt. was pumping out a full 14v also got a cel light to finally come on and it was p0110 IAT problem i have read. Could that be a bad MAF sensor? bad wiring to maf?
  13. racersedge1821

    98 GST Hesitation under 3k RPM and cruise control

    I have a 1998 GST. 140k miles nearly stock only mods done are injen intake and a cat delete with a megan racing catback exhaust. My problem is anything under light load and under 3k rpm the car hesitates(kinda like a miss but not) and under cruise control it hesitates very little. I have...
  14. racersedge1821

    ECMlink Needing a Default/OEM SD VE table

    Thank you very much sir. That is exactly what i need.
  15. racersedge1821

    ECMlink Needing a Default/OEM SD VE table

    Exactly what the topic describes. I recently switched over to SD and the previous owner had already modified the SD VE table. I'd like to start from a fresh default SD VE table to tune with. I was hoping one of you guys could send me a link or a nice detailed picture of a non-touched SD table...
  16. racersedge1821

    ECMlink Idle log advice

    Ok so i found out most of my problem the O ring in the fuel pump to sending unit was faulty causing low fuel pressure so i replaced it here is a new idle logi turned up a few of the fuel sliders about where my boost comes in at and it still is leaning out some. can i get a few tweaks or pointers
  17. racersedge1821

    ECMlink ECMLink V3 Third Gear Pull Log,Needing tuning help

    Ty all for the quick responses,i have this same thread opened on ecmlink as well. I have (both) speed density sensors and a maf connected and i find it easier to get my car to idle with maf adjusters vs. speed density tables so thats why i am using maf to help me get familiar with how tuning...
  18. racersedge1821

    ECMlink Idle log advice

    How do i change LTFT low and LTFT Mid?
  19. racersedge1821

    ECMlink ECMLink V3 Third Gear Pull Log,Needing tuning help

    Just needing a go over on my pull log and some advice.adjustments to be made. I'm very upset that my buddy's small 16g car on 22 psi. is spanking my hx40 awd so i am in desperate need of a tuner's help with my poor tunning
  20. racersedge1821

    ECMlink Idle log advice

    Ty but I have already got that part set. I was needing my log looked over in search of improvements.
  21. racersedge1821

    ECMlink Idle log advice

    my car is a forged 6bolt swapped 95 tsi awd with a 8 blade hx40 and bc 280 cams and valve train what should my airflowperrev and combined fuel trim with FIC 850's. For some reason i can't get my ISC to get to thirty and the isc motor is working properly.I'd like to get some tweeks and advice to...
  22. racersedge1821

    ECMlink 6 bolt swap speed density no maf no idle

    I purchased a 97 eclipse gst with a 6 bolt swap i removed engine and put it in my 95 eagle talon awd. I am having difficulty getting it to idle to even start the tuning process the only way i can get it to idle is with the throttle adjustment screw tightened down quite a bit then i idle pretty...
  23. racersedge1821

    Looking for Middle Tennessee ECMLink tuners

    Looking for Local ECMLink tuners V3 or V2 savy to help a few (new to link) noobs in the Cookeville,Nashville area.
  24. racersedge1821

    What fuel pressure to run with 800cc's

    Running pump gas 93Do you think i should turn it up some? Considering i'm running a HX40 with just 800cc injectors at 20 psi? If so probably 50 psi or so?
  25. racersedge1821

    What fuel pressure to run with 800cc's

    So i need to set my afpr to 43 and take off the vacuum line. Correct?
  26. racersedge1821

    What fuel pressure to run with 800cc's

    My car is a 97 gst but it has a forged 6bolt swapped with speed density,and V3 Link but my cable was stolen,the car was tuned at 20 psi and the injectors are RC 800's. Since i have a 6bolt swap do i use the 1g fuel pressure or the 2g? Running 6 AN
  27. racersedge1821

    What fuel pressure to run with 800cc's

    Would 50 psi. be suitable? I'm thinking about getting another pump but an Aeromotive inline pump. Would that work to help feed that hx40? It's only running 20psi now but i'm considering running 25
  28. racersedge1821

    What fuel pressure to run with 800cc's

    My question is,i'm running a HX40 with 800cc injectors,a walbro 255 and a fuel pressure regulator what should i set my fuel pressure to?
  29. racersedge1821

    coolant in my spark plug wire hole?

    i am losing very little each time i drive it,but it doesn't overheat at all it probably isn't safe to drive is it?
  30. racersedge1821

    coolant in my spark plug wire hole?

    When i first start the car before its warm it doesn't miss at all, only after it warms up it starts to miss allot in low rpm's (under 3k)
  31. racersedge1821

    coolant in my spark plug wire hole?

    i'll do that in the morning and i'll get back to you ty for the help and quick responses. Does it sound more like a head gasket failure or a cracked head so far tho?
  32. racersedge1821

    coolant in my spark plug wire hole?

    No the cylinder wasn't filled with coolant, and it barely smokes any white at all. It just covers the spark plug causing it to miss only on cylinder 3. And the man i traded to said it has arp's and a hks head gasket
  33. racersedge1821

    coolant in my spark plug wire hole?

    Well i got the spark plug out today and noticed it isn't leaking in the spark plug tube. Its internal like my bottom of my spark plug was saturated in coolant. Possible Head gasket? or since i have ARP's is it worth a shot to retrque the head studs?
  34. racersedge1821

    coolant in my spark plug wire hole?

    I thought i may have a small crack down near the spark plug. Would J.B weld be a short term fix till i can purchase a new cylinder head?
  35. racersedge1821

    coolant in my spark plug wire hole?

    as it says i have a 97 built gst with a 6 bolt swap coolant slowly builds up in cylinder number three inside my spark plug wires and is causing it to miss. i can drive about an hour after i clean the spark plug hole out and it no longer misses what could this be? no white smoke from exhaust. No...
  36. racersedge1821

    what catagory should i put this thread/writeup

    Thank you for the quick response i'll get the write up soon as possible in that category. As for the avatar picture it was saved from Google simply by searching black eagle talon TSI pics. I found the picture because it most resembled my own car and i posted it as my own avatar so very sorry i...
  37. racersedge1821

    what catagory should i put this thread/writeup

    i have a write up of taking a turbo off and replacing it with step ny step instructions going from turbo to N/A i've searched everywhere and there wasn't any wrote ups on it so i made one . just asking where and what place you would like this write up placed ty
  38. racersedge1821

    2G Manual transmission fluid pouring

    good new guys it was just the driver side axle. The axle had just slid out of the transmission and let the fluid pour out the two bolts that hold the axle to the block was missing. :D
  39. racersedge1821

    2G Manual transmission fluid pouring

    I'm going today to see whats wrong with it gonna jack it up and take it apart wish me luck guys hope like hell its not a busted transfer case or transmission
  40. racersedge1821

    2G Manual transmission fluid pouring

    i just drove it maybe a half a mile to a safe parking lot. my buddy told me my t-case coulda binded and shot a piece threw my transmission case cause it is pouring and it wasn't leaking at all till i drove it. So if it was a seal wouldn't it be dripping alittle at a time gradually getting worse...
  41. racersedge1821

    2G Manual transmission fluid pouring

    i have a 1995 eagle talon tsi awd i was driving my car into town today when i heard two very light clunking noises i get to the parts store to buy a coolant temp. sensor and i smelt trans fluid so i looked under my car and gear oil was pouring off my transfer case could this be a seal or has...
  42. racersedge1821

    2G auto awd to manual awd questions

    i have two AWD cars both 1995's the car that will be swapped is my 95 tsi awd but its auto and my 1995 GSX donor car witch is manual both cars are complete but my auto trans has gone out so i'm wanting to swap my auto to manual. my question is can you use the manual trans and diff from my mt car...
  43. racersedge1821

    Street/Strip build for spring?

    Guys needing some input here on my spring build.i can't decide to do a forged 2.4 hyundai sonada engine build or a 2.3 stroker build. and if i go 2.3 stroker whats a good compression ration to go with i'll be daily driving and weekend warrioring the car. and i'll go with a big 16g or 20g if i go...
  44. racersedge1821

    420A starter issues

    This is a 1999 Eclipse RS. It does not run right now. I believe it is a electrical issue. The starter will not turn when on the block, but it will engage and disengage. When not on the block, the starter will work. what do u guys suggest?
  45. racersedge1821

    What to Upgrade next?

    any intake suggestions? forced performance dejon or ebay?
  46. racersedge1821

    What to Upgrade next?

    Ok guys i'm back again,and after hours of reading i want a few opinions from fellow dsmers.i'm debating on my next upgrade choice. do i either get a forced performance cold air intake,convert to a 2g MAF,or go with hardened intercooler piping? and before anyone asks i have all the free mods and...
  47. racersedge1821

    Slight ticking from driver side

    ok guys here i am again with another hopefully good answer to my very scary question.I took my car to the track this weekend and run good times for a stock car she did a 9.24 @ 76 mph. well after i got home that night i notices very very faint ticking coming from the bottom end on the drivers...
  48. racersedge1821

    Ready for the track.Got a few questions

    thanks guys for the quick replies. well at 16 psi what rpm should i launch my awd at?
  49. racersedge1821

    Ready for the track.Got a few questions

    what would be the next in line supporting mods i need to do?
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top