Back in early July my starter died. Had a new one put in and all was working fine. About a 1 1/2 months to 2 months later it started giving me issues. When I would go to turn it over, it would just make a whining noise, but wouldn't actually turn over. I was told the arm wasn't kicking over or...

Hey guys, I'm moving to the TriCities area in a month. Either Richland or Kennewick. I'd like to meet some guys in the area. If you got myspace add me MySpace - www.myspace.com/14746035:thumb:

Well over the weekend I changed out my lifters becuase they were ticking so bad I was getting knock when cruising. Last night I did a WOT pull and the car bucked and jerked bad, and my knock light came on as well. It didn't do this before changing the lifters. Could it somehow be related or just...

First of all I have had multiple verify this is lifter tick, but please check this vid just so I can be 100% sure this isn't a bigger problem. Sometimes it seems to be even louder than this, like a clunking noise. But anyways here is the vid: <object width="425" height="344"><param name="movie"...

Hi. Ive had my car for about 3 weeks now (97 gst) and a few minutes ago I left my friends house and noticed the Antilock light was on. So I drive home, turn off the car, and there was like a really loud buzzing noise coming from the front left side of the car. It sounded like it was coming from...

285whp with over 300lbs of tq spiking at 24 psi dropping off to 22. Mods are in my profile. Does this seem a bit low or am I just expecting too much? I thought I'd reach 300. Looking around at other peoples dynosheets with the same mods as me or even less mods and they all seem to dyno better...

Ok, so I recently lowered my car 1.5" with the Tokico Illumina suspension kit. I just took it in to get aligned. I was told the rear camber was good (I used the homemade camber kit, 3 washers each bolt), but the toe was a little off. He told me the toe adjusters are rusted and he can not adjust...

Ok so I got my Illumina suspension kit installed with the 1.5" drop Tokico springs. I plan on doing the home made camber kit in the rear.. my question is (not sure if this is different for every car or not) just how much more negative camber did the illumina kit bring onto the rear? I do not...

Need some help. I am trying to do the front engine mount first. I got the engine jacked up and I got the bolt that goes through the mount out, but I can't figure out how to get the insert into the mount. The bracket that goes to the engine is in the way. I tried letting the jack under the oil...

This is my first time doing any suspension work. I am trying to put my tokico suspension kit on. The bolt is pretty much stripped and I may have to cut the whole thing off. What is this part and where can I get it?I am referring to the part with the arrow going towards it. Thanks.

Ok so I need to get a new ABS relay for my 2g. I found this on some other forums:Is this the same case with the Eclipse relays? If so any one know where I can get them for that cheap, or at least the part number? Thanks.

I ran completely over a curb going about 10mph. Now I'm having some noises from the front end. To me it kind of sounds like a grinding noise or something? It only really does it when I'm turning. The car doesn't pull to one side or anything. What could it be? Could an alignment fix the problem...

2 days ago I put a bottle of Water Wetter in my coolant. Just a few minutes ago I went to start my car and I can actually hear coolant moving around inside my motor. It sounds like coolant rushing through pipes or something. I can only hear it from inside the car when its started, not from the...

And what kind of tires should I get? My car will be lowered about a inch and a half.eBay Motors: MUSTANG GRAND PRIX ECLIPSE MONTE CARLO 18" WHEELS RIMS (item 170269394359 end time Oct-12-08 12:31:00 PDT)

Ok so last night we put in my FIC 550cc injectors. We have a basic tune that we found online on the SAFC II(getting professionally tuned with the next couple weeks), only running around 14 pounds on my 16g. Drove it around last night and all was fine. This morning I get up and drive it and I am...

Last night I put in a set of FIC 550's just wanted to check something real quick... I know that you have to replace the stock seals in the head with the ones that come with the new FIC's, but my question is, do you have to stick the seals in the head first and then put the injectors in? Or just...

Just bought an SAFC II. When I mount it I would like to keep the center vents, as well as my stereo. Has there been anyone that has managed to mount it below the stereo? If so can I see some pics? Any other clever locations?Thanks.

Anyone have any pics of a 2g with the stock 2gb GST rims in flat black as well as gloss black?

View the vid please. This sound is totally random. It is squeeky and very annoying. This is one of the rare times it has done it at idle, and I was lucky enough to get a vid of it. It almost always does it when there are any major changes in movements in the car.. for example when i start off...

So yesterday I took about an hour and a half round trip on the freeway. I noticed my stock temp gauge was a little bit above halfway. I figured this was just becuase of hot weather and my front mouth blocking some airflow to the radiator so i ignored it. I got back into town and my stock oil...

So on Monday I took my car into the Mitsu dealership to get looked at. It was there for around 4 hours before I took it home. The same night my amp and subwoofer get stolen out of my trunk. The car was parked in my driveway with the alarm set (stock alpine alarm). No broken windows, no signs of...

When I turn left I can hear a loud knock coming from the front of the car. I can also feel the knock through the firewall. What could this be?

Ok so about a month and a half ago I put an ETS FMIC on my car. It ran good. Couple weeks ago it would start sputtering and running bad around 3k rpm's. I will be just cruising through town in 3rd gear.. barely on the throttle at all, and the car will start sputtering. I will floor it and it...

My dipstick broke. The question is, is there a difference between a 6 bolt dipstick and a 7 bolt dipstick? (I have a 6 bolt block).

I got my wideband installed yesterday and this is my first time using a wideband so I just want to make sure its working correctly.First of all at idle, the gauge normally stays around 15.4 or so. When I first star the car it will be at 14.7, then it climbs up to the low to mid 15's and...

Went through 10+ search pages and couldn't find anything about this.My question is, how does the gm maf, and maft setup work in different weather conditions? I was told in different weather conditions such as rain, the intercooler will suck up small amounts of water and go through the gm maf...

Going to be putting a uego in my car soon and just wondering how safe it is to mount the connector from the sensor to the gauge underneath the car as shown in this pic? The tutorial on the site shows it done this way and I just want to see if anyone else has done it like this? I am kinda worried...

Both pulls were done in 3rd gear to redline. All mods are in my profile. Doing logs becuase my car is not pulling as hard as I think it should be, and was told to have my logs checked. Thanks

I am planning on using the capacitor and resistor technique to eliminate my rear o2 sensor. What is the best way to plug up the hole on the exhaust where the o2 sensor is supposed to plug in? I was thinking of using a bolt but I dont know what size bolt I need... Thanks

There is a rectangular shaped dent on the last bend right before the muffler. Is it supposed to be there? It is like a perfect rectangular shape and kinda looks like it was stamped on there purposely, but I just wanted to be sure.. Thanks.

In the near future, I am having Lucas English of English Racing do a 6bolt swap on my car. I am buying a used 6 bolt block from him, and he is going to use my 7 bolt head on the block. He is going to use the existing 6 bolt rods with new 8.5:1 compression pistons, with a BSE kit, a new water...

Quite often my A/F gauge will max out rich and stay there, whether I am giving the car gas, or at a dead stop. It will also stutter sometimes when I really get on the throttle. It does not always get stuck on a rich condition, and when it doesn't it seems to work fine, but it always shows that I...

I installed a new HKS SSQV a couple months ago, and ever since then my car hasn't seemed to be running as well (even recirculated).. Also the car seems to reach full boost waay easier then before.. and its hitting around 14 PSI on the stock T-25. Does this sound like the BOV is leaking?

I did a search on this but couldn't find anything. Has anyone here done this? How much could this cost me?

So, I've decided to go with the HKS SSQV blow off valve. Is this all I need to do the install on stock upperintercooler piping and the stock intake?http://www.dsmparts.com/customer/product.php?productid=766&cat=7&page=1 http://www.dsmparts.com/customer/product.php?productid=516&cat=9&page=1...

I was driving tonight and took a left turn and now my left blinker wont shut off no matter what (emberassing as hell) So I just disconnected the fuse for now so I have no blinkers. What is causing this and how hard is it to fix?