I lost the key to my lug nut, so how do I take them off now

how well does the stock 420a take nitrous?think 50 or 75 shot is to much?

Has anyone ever used this adapter to send oil to the turbo? Has anyone used it at all?

has anyone used this intercooler before[/IMG]

if i hook up the vacuum line from the waste gate to the compresser and not have a boost controller where do i hook up the vacuum line for the blow off valve. also.. if i have a 10 psi spring in the waste gate, does the bov have to have a 10 psi spring also. hows that work?

i just noticed that my transfer case is leaking on the passanger side where the axle is. any ideas why it just started. a month ago i had the drivers side axle replaced. other then that no work has been done. and i dont drive it but once a week

i had to replace my TOB. well got a new clutch and got it all dont. now TOB still make that crazy sound. i think maybe i didnt put enough grease. i used the red grease from advanced. i packed grease all around the inside and inner sides of the bearing.. who knows whats goin on/

ok ive had this problem for a few weeks and ive tried everything i can think of. my speedo doesnt work. my vss gear fell off. so i got it out and replaced it.. it still doesnt work. the sensor itself works fine. i turned it and the speedo moved. i cleaned and inspected all the connections...

finally finish installin my new clutch and wtf. i changed my clutch because i had a squeeky grindy noise comin from the trans. i figured it was the throw out bearing. thats what every one else thought also. i installin the new clutchmaster stage 1 clutch & bearing . i greased it all up .and not...

i replaced my clutch and i had to take out the whole hub and axle. ### i couldnt get the axle out of the hub. well when i was trin to get it out we banged on it with a rubber hammer and a socket. well now when im done and im puttin everything back in place. the end of the axle is a little bent...

replacing my clutch. i need to get the axles out of the hub. i got the rotors off and i've been bangin at it with a rubber hammer. it will not budge. need help. i've reached a problem in my installation.

does anyone know how much torque to use when installing a clutch?

is eclutchmaster clutches any good. im lookin at a stage 1 260 shipped

Does anyone have any tips on how to remove a manual transmission? Also, how much does a manual transmission for the 420A weigh?

i need to pull my trans and i want to see if anyone have detailed step and pics for pulling. are there any special tools i need? i plain on doin this in my driveway. im sure there have been some thread on this already or if there is a web sit. please let me know..

ive had this problem for a while. i replaced my vss and well it still doesnt work. its not the cluster ### when i turn the sensor the speedo moves. could one of the speed sensors by the brakes effect the whole thing from working? i think my trans is all fubar. i heard a pop some around the same...

i just turned on and started driving. and out of no where hear a squeeky-grinding noise. i look under the car is its louder seems to be coming from somewhere near the engine. like maybe the transmission or transaxle. when i push the clutch in the noise stops and starts again when i let off.. but...

does anyone know where the speed input sensor. i know where the vss is but i guess the other side to that is the input sensor.. i dont know where to look. i have a 99 eclipse 420a 5spd.

who knows where i can get a air suspension kit, air bags, cylinders.. somethin.. what web sites have direct bolt on's

i have a 99 eclipse and my speedometer stopped working.. i got a speed sensor and the plugs dont match up. i have three flat strips inside the plug and the one i got in the offline had 3 round strips.. is there more then one plug for the 95-99 420 eclipse? what web sits should i be able to buy...