No matter what anyone says, if any of us where to be in the same situation. We would have faced a much harder sentencing. He might not have gotten the full punishment of the law, but he did get a "fluffed" one at that... Seems like people with the money/ spotlight are always coming out ahead...

So you reffering to the coolant lines running form the Oil housing "sandwich" to the pipe, correct. If so, then yes its ok to replace with rubber lines as long as you have a good mounting point to secure the lines.

Your best bet is to go to the junk yard and match it up. If your in a bind you can also take a longer bolt w/ washers and nuts and basically bolt "through" until you can find the right bolts...

The only way to replace this pipe is to weld a fitting on and run like a ss braided line.. but, why are you trying to replace this. Is it leaking, rusted..?

Question #2- 14mm for the starter. You might want to install lock washers to the bolts depending on if you have prothane motor mounts, as it tends to vibrate loose.Question #3- Just take the heater hose and loop it from the feed to the return. Another way is to block oth sides, prefferably...

Question #1- Are you talking about the water pipe leading form the pump to the lower rad hose, or the smaller coolant lines from the trubo to the housing???

Currently by ear.. but rev limits set at 9200 until I can fix the tach issue. Thats why I can't give you an exact spool rpm.

5600 rpm, don't know excact figure due to inop tach.. sorry

I'm running a 2.0L w/ BC 280 and a PTE 67. I love the reaction from the car. Its not as laggy as you might think. My draw back is the stock intake mannifold currently on the car.. I dynoed 495hp on low boost, 22 psi, and pump. Trust me it just wants to rip the front off the ground. Sick...

Any steering pull is directly affected by Caster, also an excessively negative camber will couse it to "lean" the car in that direction.. Just because the steering wheel is straight doesn't mean the car will follow. Toe adjustments are done to correct the sterring wheel in relation to the front...

Car looks HOT!!! Im currently trying to find a carbon hood for pop ups.....

Hey,Does the car go into gear when the car is off, or not at all? My friend had a similar problem the his car would only go in gear when the car was off. When it was on it would grind but never go into gear. Anyway turned out his shift fork was bad. After he replaced the fork and ball...

Thanks... theres only one thing missing; FMIC, soon (hopefully) :talon: .

My 1ga....

I payed $85 new, for all 4 Prothane mounts.... Big improvement against wheel hop. Ordered them locally from Titan Motorsports. Do a search for website, ask for Geo, hes my DSM connection..... :DMark :talon:

I know how you feel..I work for Lowes, loading trucks at their warehouse.... BORING. I work 10 hour shifts loading 5 trucks a day. Usually im so bored I stack boxes in front and sleep behind, I know I'll get caught and fired but whatever.... Later,Mark

No.... Sucks for you I got FREE rims...haha

Same thing happedned to me awhile back... Sucks !!! I had both front wheels destroyed by road construction. Luckly I had the state pay for it.Went out and bought new rims and tires and sent them the bill of the new ones.. Turned out even better...Anyway good luck. :thumb:Mark...

:thumb:

Ive got mine in the coin holder... thinggy.look at my gallery...Mark :talon:

Thanx guys,Finally got the pics to work in the gallery so you can check out all 16 pics...First 7 pics are recent and the car is very clean and waxed, the other ten are old pics and the car is VERY dirty..... so enjoy.Mark

Thanx man. I personally love the look of the black top so TINT is definetly a plus.. Cleaned it this morning, so decided to take some pics with my buddys turbo MX-6 ...FUN TIMESMark...

Light cover is alittle lower due to some minor hood damage..... no biggieMark :talon:

Hey guys,Couldn't get gallery to upload photos so I'll post them here..... Enjoyhttp://memimage.cardomain.net/member_img_b/273545_930_full.jpg[/IMG]http://memimage.cardomain.net/member_img_b/273545_932_full.jpg[IMG]Please let me know how to get these pics in...

Actully, he does... But Im bringing my own.Well see what happens... thanxMark :talon:

Thax for all your interest.But, I will be getting this problem fixed tomorrow for $175 from a buddy, so i WILL baby it to his house..... :confused: Hopefully nothing will happen on the 5 minute ride.I actually tried to remove the bolt by loosening the cover, but, I wasn't able to get...

Hey guys,I know that im not supposed to drive it like that b/c trust me Ive gone throught the bent valves and all...... But, I have to use this car for work on Monday.Theres really only ONE option left for me at this point. I have a buddy thats knows everything about DSM's so I'll have...

Last night a friend and I were doing some work on the car and when we went to put the bolt back on the spark plug cover it fell into the cam gears.......AHHH. So I wasn't sure what to do so..( Not thinking correctly) I cranked over the car and my friend said he saw the cams jump a little. I...

Please do mine too, .......please........Vin: 4ECS54U9ME127395Results please sends to: [email protected] very much...Mark

Thanx everyone for your help....Mark

Fuel pressure is set at 45, is this correct..

Fuel pressure is set at 45, is this correct..

Whats up man?Were in the same boat, but get yourself some Falken tires and run them with less air pressure in the front. By the way, you only need Drag radials or slicks on the drive wheels.... FWD= Front only, AWD= All four ( If you had some kind of traction problems of course) : ). Anyway...

Hey guy,I logged from a 3rd gear pull. Now what, not sure what to do b/c this is my first log. Please let me know what to do tunning wise as I ave an AFCII. Anything helps.... I'm on 450's and 15lbs of boost. Thanx.... :talon:MarkRPM Injp Knck...

Hey George,You might wnat to try looking in to the antenna. I had an issue were the seal at the bottom of the antenna had become dryrot and no longer sealed against rain. Just unscrew the antenna and check the condition of the rubber seal. I solved the problem with rapping the seal with...

Double sided 3M tape should work just fine. Its some strong, long hold stuff. You might as well wipe it down concidering that that is an area that usaully goes unnoticed.... but up to you. Good luck,Mark :talon:

Thanx devlish,For your extended research..... :DMark

No problemo....Check my gallery for pics. ;)

Listen, why would you go buying some gizmo to do the same thing for free? All there is to the lazy eye mod is a fuse. its located on the top left corner of the fuse panel under dash. I believe its a 10A. Just pull that out and then adjust your headlights manually. Besides when you pull that fuse...

Does anyone know the name of it?

He what you doing with my car? Just kidding, but yeah thats the same color. Im not sure of the name either. Have you seen many of the same in your area? Keep them coming guys.....Mark :talon:

Thats what i was thinking cause even when you go through the gallery u might see one for every 100. Its seems to be rare but i know there out ther. Please continue posting pics of your rides.Mark

Whats up? Wanting to start a pole on the amount of people with the same paint color as mine, as i have only seen one other car the same as mine. I believe my paint code is AE6, but not positive. Is this a rare color? Please post pics of your car..... :talon:Mark...

Thanx for the info, guys. Looks like the search continues for me :rolleyes:. Im looking for atleast a stage 1 kit so any info would be great, thanx again...Mark

Have any idea about the turbo itself? The seller has turbos listed for like $350 for a supposed T3/T4.

Thats what I was thinking because all the pieces individually are no name knock offs. Thas a shame b/c i was hoping it would be legit... Oh wellThanx for all the replies.Mark

Suxxour (SP) meaning BAD or ....

Just woundering if you guys could tell me if this kit seems worth the dough. The kit is curently bidding at $306 with the by it now option of $750. Let me know what you think... Ebay item # 7916979852thanx,MarkKit includes;DSM Master power T3/T4 Turbo Tubular SS 4g63 manifold...

You might want to check if you connected the wire to the e brake cable. Good luck..

Please i need info fast....This is a possibly dangerous situation, car wants to roll back into traffic w/o a stopper....help!!!