Here me my order:AWD Set w/22mm bushings
Add 24mm bushings
All bushing 95A duramoterif my maths are correct that should be 320+62= $382. Is that correct?
Hey Bobby, I'll take a set and a few extra's, see order below:AWD Rear Subframe
95A Bushing for 22mmQuestions:How much are additional bushings (both 80A and 95A)?
Can you provide 26mm bushings?The reason I ask is b/c Whiteline does not sell a 27mm sway bar (anti roll bar - ARB), only a...
After doing a little more research, hope is not all lost. I can either weld it up and re-tap the bleeder screw on the opposite side or I can try and use an insert/helicoil. I've decided to go down the latter path as my welder isn't set up for Al welding and if this works, welding is still an...
So after all that hard work and fun, what would a DSM story with out a palm to the forehead and an immense amount of frustration? Sorry for my poor language. :) Here's what I'm currently battling:
So after everything got installed and tested, I was able to take it out on it's maiden voyage to hang out with some other DSMers in Orlando. Oh and shout out to the people that took pics of my car and Adam LZ for the couple stapshots on his YouTube channel. He's got a super sick EVO VI TME...
Here's some pics of the PS cooler bracket and the #Mishimotor radiator. As I said in an earlier post, these came in wired incorrectly, @DSMtuners for the rescue as this was covered years ago and it helped me resolve the issue within a 1hr. A quick re-wire and a trip to #AdvanceAutoParts for...
So much and little has happened since my last post way back in August. My fiancé and I've purchased our first home, moved, hosted Thanksgiving and Christmas, AND attended Mitsubushi Owners Meet (MOM) in Orlando!The short version of a very long story is that the racecar was up and running but...
Thank you guys for posting this, I just finished installing mine today and couldn't figure out why they're not coming on. This article solved the problem. The plug is wired backwards, Grounds on the fan side are located where the power pins are on the factory harness.Disappointed but glad...
New hood is mounted but not installed as I still need to mount the Aerocatch hood pins/latches. Finally got the rear trunk installed. New trunk lid and polycarbonate window weight 26lbs vs. factory 73lbs, (47lbs delta weight ). Overall I think I saved about ~55 lbs between the new hood and...
Not a whole lot to update, cars been down for a couple weeks due to trying to put an exhaust on the car. FYI, the STM downpipe is not compatible with the factory O2 housing due to the DP inlet being 3”. You need to get their O2 housing or an o2 housing that’s got slotted flange bolts that can...
@ec17pse if you want me to host a class on arc physics of MIG vs. TIG let me know! The amount of useless knowledge I have about welding is being squandered, haha :)
I finally get to say “As a Welding Engineer...”!MIG is fine and the extra few ounces of weld metal can be offset by the driver using the bathroom before a race. The efficiency gain is well worth it and the weld strength is the same as TIG.
I woke up Monday morning @ morning 0300 that there are probably different kind of Rivenuts... DOH! The bottle of tequila that cause me to wake up at 0300 with a splitting headache also cause me to remember that McMaster Carr has a solution to every problem. And so some “yellow sink chrome...
Sooooo I bought another transmission thing. I promised my Fiancé this was going to be last transmission part I would buy. It also happens to be final parts on my list :)These Frontline Fabrication parts are super awesome and I can not recommend them enough.The plan now is to send everything...
While Dan had the Talon I attempted to start work on the CF rear hatch, which... has def. been a learning experience.Before drilling any holes, I measured the inner perimeter of hatch using some string. After making a full loop, I untaped it and stretch it out on the garage floor using a 25'...
Dan Partelo picked up Talon a couple of weeks ago to get the suspension set up. He offered great service and asked good questions while setting it up. Below is the cross weights, along with his set-up sheet should any of you guys wish to utilize the same settings.As you can see, Talon has...
While Talon is off getting is suspension aligned, I've got the opportunity to complete the assembly and installation of a carbon fiber trunk and lexan rear window. This will def. shave a bunch of weight off the rear, hopefully lowering the center of gravity, and improve vehicle performance w/o...
So Dan Partelo (https://www.facebook.com/DanParteloRaceCars/) came by the house today to pick up Talon! I really do appreciate the guy driving 2-1/2 hrs to pick up the car with his own truck and trailer. He was extremely friendly, inquisitive, and willing to listen about all of my wants...
I saw the post you made on FB regarding the wing, but can you start a thread on DSMtuners as well? I'm sure the community would be interested in following this process and potentially procuring a wings as well.
Fresh parts incoming for the start of Talons "Hopefully Never Gonna Break It' transmission! All of the used parts are in great shape. The guy I've purchased everything through has been super helpful and transparent. He specializes in Evo 1, 2, and 3 parts both new and used. If you would like...
It's def. stiff for the street. but living in FL where the roads are smooth it's not so bad. If I was still in LA or using it for a daily that would be overly harsh. Once I get some more track time on them I'll have an update.I've AutoX'ed on them only twice and in order to get the car to...
So I've been waiting on my guy to finish moving shops before picking it up for the suspension set-up work. However, I've been able to locate the necessary EVO III components for a TRE Stage 4 build in Europe. So hopefully, those will ship soon and the next phase of Talon's build will start :)
I've been checking around and 3M "Black Super Weatherstrip and Gasket Adhesive" seems to be what's often recommended along with some weather striping around the perimeter to give it an OEM lookI don't know about the weather stripping but I'm considering using some pop rivets in addition to...