Hey guys, I have a 1g NT wire harness that I am using for my build. Basically deleted a bunch of the unneseary things from the harness that I dont need. Well, my issue I ran into is the resistor pack. I am running High impedence injectors, so I dont need a resistor pack anyways.My...
Hey guys, building another 1g dsm. I'm swapping a manual to auto car.I bought a auto engine harness and interior harness. The weird thing is, with this new interior harness, there are no wires going to the rear 6x9 speaker areas?It's a 91 car and I have a 91 harness. The part number shows...
hey all,So over winter, I swapped my stock 7 bolt for my built 6 bolt. Its a 6 bolt bottom end, manley pistons and rods, stock compression, with a 7 bolt head ported and bc 272s. Car was tuned prior on my stock 7 bolt and made 400whp at 30psi.Mods, hx40, afpr, evo 3 intake manifold, jmf...
Hey guys, first I am not good with electrical but am learning.Second, I outgrew my wally 450. So I am running DUAL inline AEM 380 pumps.How do I go about wiring this? One of the standard plug line, and the second on a auxiliary is what I was told. Little confused how to do so however. I...
Hi guys,Car ran great last fall before I put it away for winter. Over winter I changed the setup. I installed the following.HX35
SMIM
Tubular Manifold
Tial WG
FMIC (already on car)
ECMlink v3
Wally 450
Motor mounts
SD kit
PTE 1600cc
Waldron fuel filter and new 6an lines
AFPR set to 43psi...
Question, is it possible to reverse the TPS sensor? Example, to flip it 180* degrees.It's currently hitting my intake manifold (venom) and with the exception of adding additional spacers I'm not sure what to do.Thanks for the help and letting me no.
Alright guys a couple questions, I have windows 7 on my computer and will be using dsmlink 2.5. However i am not sure what file to download and run. None of the downloadable files are for 7 and or for link 2.5. Little confused what to useSecondly i have some 1600cc injectors i will be...
So I bought these kyb agx struts and eibach pro kit springs (already installed on them)and installed them. The gap is huge! From all the pics of other DSMs it shouldn't be this big.FYI the car has had them mounted for months now and they have "settled" but still didn't change any gap.Any...
Like the title states, i cannot get link v2.5 to connect, it keeps giving me the prompt that it cannot connect to com port 1.It will not allow me to change the com port. I have updated the keyspan driver as well.I have dsmlink v2.5, computer is running windows 7 64 bit. So i read from...
Ok so i installed my KYB AGX with Eibach Pro kit springs on them, and there is huge wheel gap. We are talking 4 fingers inbetween. The car is sitting on modest 17" wheels and 45mm tire height.The rears are adjusted to 8, and idk how to adjust the front. Is that possible? I bought them...
I am currently in the process of building a 1g AWD Laser, the plan is to have the car running 10s and to be putting somewhere in the mid 400s whp. I am looking to break some records for whats currently posted on the site as far as a 20g turbo.The background of the car. It has been tossed...
Hey guys, so when i bought the car it came with 2 fmic (one big and one small). The big was trashed and in bad shape so i tossed it. I have a small fmic that is about 27x7x2.5.What sort of pressure do you think it can hold and how much hp? I will be running a custom 20g TDO6 and also...
I am re painting the car and not sure what to do, the original laser paint has black roof, with a panel of blue on the rear hatch. Some cars have a all blue roof, and some do a "panda" type look black on top and other color on bottom. What do you guys think?
So I am installing racing harness because the previous owner had started to strip the car down and all that was left was the lap belt on the driver side.Think it came out well, for $25. You can order the grommets from Corbeau, just call them up and tell them you want the 5th seat belt...
Well just as the title says; what all am i going to need for 1gb talon side skirts to fit on my 1gb laser? It looks like 6 pieces total? The part on the door, the skirt and then the front cap?Has anyone done this swap before? Just not sure how it will align/look because there seems to...
I'm simply trying to find where I can get rubber grommets for the car seats. I'm making the racing harness I have fit the stock seats and have found write ups on How To however I just can't find the actual product myself. Again looking for square seat grommets.
I cannot find anything anywhere to help me determine if I have a 1.3 or 2.0 Maf-Translator. Does anyone have any way of knowing this? Mods are correct in profile, 255 wally rewired, aem wideband, 560 evos.I currently set the car to Aux 0 and base 4, is this correct? I see many people...
Hey guys, posting in the newbie forum because i have been out of the DSM game for several years now and kind of stumped. Little bout the car, 92 awd laser, 2g maf, walbro 255, small fmic, 560s, aeromotive afpr, 14b.Problem; it has a misfire under boost at about 10lbs.
New plugs gapped...
Hey guys, i keep reading and seeing 2 different things. People keep saying CAMSHAFT and Crankshaft. Im looking for some clarification.Now on my evo scan it says P0335 Crankshaft position sensor A Circuit Malfunction.Now the car wasnt throwing any of these codes 2 days ago. This...
Hey guys.... just curious who all is into MMA? Last post from some old thread was back in 2007.Im just starting to train now and just curious what other guys were doing.This is a time n place to ask questions n get answers. Bump training tips off each other n what not.I plan on...
Alright guys, so in my trunk i noticed a plug IDENTICAL. I figured it was some audio plug the previous owner installed or something.Well now i found another tucked under my carpet under the passenger seat. (I no thats where the stock amp was)Anyways, i noticed it goes somewhere behind...
So one night my VSS started bouncing like crazy. So i went and bought a new VSS. Installed it. (Pretty simple right? No complications installing it)Well start the car and it works. (Thought it would fix my limp mode, to no result) Anyways, park the car for 5 hours. Start it back up and...
Im curious about putting wider tires on my rims.I currently have 215/45/17, do you think its possible to put something like 225s or 235s on the rims?Or will i just need to get all new rims?
Can someone please POINT OUT where this plug is!? I have to check this plug, because i may have accidently plugged it in wrong with another one.IF SO, i wont have to drop off my car to a shop, but im not positive where this plug is located. I no which plug is the REVERSE plug, and VSS...
Hey guys, after my head build the trans decided it didnt want to shift gears. ( I no they are completely unrelated and i didnt touch the trans)Well, after me trying to figure it out and getting frustrated its currently at a shop and they say its electrical and its the TCU. I have a new TCU...
OK guys, so originally i had no Reverse or gears werent changing. Well i seem to have plugged in the wrong plug (i put the CC instead of the TRANS!) anyways...I have Reverse now! But the gears still wont change, even with the road surge box.... what should i check now!?
Hey guys, so my hg was blown, pulled the head and rebuilt it. Did not touch the trans at all.Well get the car running, motor sounds great...well problem. Trans will go in P,R,N,D,2,1..but not run properly.In Reverse it doesn't MOVE! And in Drive it stays in 1st gear. I have the...
One of a kind Eclipse in NZ.... while i was living there i saw this ad and thought i would share. Its the only one in the country i guess... anyone on here?Mitsubishi Eclipse 1992 for sale - TradeMe.co.nz - New Zealand
Hey guys, so im installing my rocker arms again on the car and bout ready to put the cams on.I noticed there are numbers on the rocker arms now. Is there any certain order they go on?
Well driving to work one day... car took a dump. Oil pressure dropped and started hearing a ticking. Well im sure it came from a lifter, ### ive already checked the rods.Anyway, here is some current progress and cleaning.New hg, new head with a light port job and angle job. Also...
Ive searched, and thru other forums came up with this answer. When using stock head bolts into a aluminum block, DO NOT LUBE. They say it will cause galling.Then there is the other option of lubing it with just oil.What do you say? Lube or no?
Hey guys, so im not a total newbie, but its my first time pulling my head. The hg was pretty bad, but ive checked with a straight edge and the head is pretty flat.Well anyways, what all should i have a machine shop do? Hot tank, clean the head? Resurface if its bad and what else?
Hey guys,Im at a loss here. So driving the car to work, pulling into my parking lot i start to hear a tick/clunk. As i slow down it gets louder, i start to accelrate, it goes away. Finally, i park it 10 seconds later. Struggles to idle, but it does. If i rev it, it starts to make the...
Hey guys,So i run a cafe with my mother and its next door to all the army and navy recruiting offices. Well long story short, i have always kinda wanted to serve, and i would go Marines if i did.I have talked to my local srgt. and i would enroll in the OCS. (Officer candidate school)...
Hey guys....driving the car to work, i slow down. And i hear this sound a large tick that sounds like its from the bottom of the engine, well it sounds JUST like a spun rod.Its just like the videos i have seen with spun rod. I am going to tow it home in a day or two from the lot and tear...
Hey guys, cars got 87k on it. Comp came back 150-145-130-130, its burning a little coolant as well. So im pulling the head, what all parts do you think should be replaced?Here is the list from the vfaq... but is it all necessary? The car doesn't have that many miles for being a 99...
So i was just watching Fast and Furious (the original ### it was on tv)And about 38 min into the movie, when Paul Walker pulls up to Torettos garge with the burnt to hell supra, there is a sign on the outisde of the garage.It reads, Contractors PryamidThere is a triangle and on it...
Hey guys, ive done this 2 times now and just like it says on the VFAQ.Checked the compression, WOT with the injector fuse pulled.Numbers came back (from left to right on top of the head) 150, 145, 130, 130I have had some heating issues recently and i think i am burning VERY little...
Well after a number of problems it looks like i got the car running now.Replace water pipe seals (as the turbo first pushed on it and it was leaking)Fixed all my leaks!! YAY!Heat shields on, fan on (soon to be 2 more).Small wire tuck and cleaned the engine bay up a little.Anyways...
Hey guys, so just curious, my car is NOT at TDC here. I have not had time to do a test, i just noticed it after i got out of the car today and was doing a little cleaning.I mean, i no its not at TDC but it looks like from where the two gears are currently sitting, it wont be at 9 and 3...
Ok, so i have been told by a couple people on here, to burp my system, put the car on a incline, start the car with the radiator cap off, let it warm up....once its warm it will open the t stat and i will see the coolant start to run through the radiator cap area. Then continue to fill as...
Hey guys, just got my 20g installed. Was running stock wastegate pressure (like 9 psi) it would spike to like 14 then settle at 9psi. Well i put my boost controller on, and just went up a few pounds.Now it spikes to like 20 and drops. This turbo feels great when its hitting around 16(i no...
Hey guys, just cleaning up the engine bay a bit more and came across these two things... i have seen some people have removed or rewired these pieces.Just curious what they are? ( i have searched and searched with no luck)I circled in red the 2 things im not sure of, the red circle...
K guys, so i got my 20g in finally, now my new problem. Coolant is leaking inside my cabin. So i checked the line running to the firewall. I dont see anything wrong with it.No leaks in the engine (thought it might be running in, well its not) So i think a line came disconnected at the...
Hey guys, i need 2 O rings.Anyone no the part number or where to get them?They are the ones on the water pipe.There is 2 of them, one on each end. The pipe that goes to the water pump across the block...the one that sits behind the turbo.K thanks guys!