Hello everyone My names Rj i am new here. Yesterday i bought a 95 Talon Tsi with 118,000 miles. I took it for a test drive and everything was perfect. it started right up no hesitation, and drove it about 10 miles boosted fine no loss of power mechanicly or electronicly. everything worked...

I gotta hand it to the crazy canadians this year they were outta control with that colt on the dyno. I talked to them later that night and they said buschers dyno was way off. Lol buscher said 700ish but it was spinning on the dyno!!! Canadians said it was only anout 430 hp. still a bunch of...

i wasnt ripping into anyone i was pretty much saying sorry if i was wrong.

one more thing then. just to add. if i was informed worng thats one thing. and i am sorry for telling you what i have come to realize. But he didnt ask anything about using Link. what Makes u sure he even has link? And my last point is since he is running a stock ecu and he was asking about...

hey bro i personally like ETS intercoolers, give them a try. trust me their newer kit, um the ultra short route, flows better than dejon piping anyways. off the dejon powerhouse stuff and buy the intercooler kit.

my gas milage is the same

WHAT!!! no no no dont remove the rear one and replace it with the new o2 sensor. the sensor after cat is for long term fuel trim. Your car will run lean as heck, so yes it does have something to do with the origanal tune of your car.. weld a new bung 36 inches from turbo. aka on the...

Cant do that stuff here in ohio get in big trouble. though i have open downpipe to turndown.ROFL. i personaly dont like the tone of a bullet muffler. sounds to much like a fartcan

could possilbly be a vacuum leak.

i honestly wouldnt do the machining yourself. do u have the right equitment to even do it?

Just buy a 14b, stock 1g turbo, my buddies running 18 lbs on that right now. it been that way for about 3 months. but he has supporting mods that you may not have. walbro, afr, ect.

if i were u i would keep boost stock. The t-25 is already pretty much at its limit. And dont waste your money on that controller. I personaly dont trust ebay, but it just looks like plain crap. etremepsi.com has halman manual boost controller for like 80 bucks shipped, buy that if anythin...

Sounds like its time to pull tranny and check it out. Mine does the same thing, me and my buddies took the tranny off and it turned out the input shaft has a lot of play. I am getting a rebuilt tranny from TRE. Pretty cheep for what you are getting check em out.

me and like 15 other guys will be their friday through sunday

hey future dsmer. how many miles does your saturn have on it. if it has over 100xxx and you drive it like a race car you will literally blow a dif pin though you tranny casing. no lie.. it happened to me with my white 93 sl1:notgood: but you may find out what crankwalk is if you buy a 4g.. lol

boost leak?? mabye.

i ordered a garret big t28 yesterday, and i just want to know if i can run stock boost with no problems without any modifications? also if i wanna turn it up to say like 15-16 lbs what will i need~ besides a boost gauge and controller. will i need a new fuel pump or can i just do the...

my turbo blew up... i just dont wanna throw a poopy t-25 back on. i just want something that can remain stock touchy for now and potent later on when i get my daily driver. thats why i was thinking of the t25. though a 16g does sound good. i don't know i got a lot of thinking to do before i...

thats what i wanted to hear thanks guys i appreciate it a lot. THANK YOU you guys are always so much more helpful than any other forums, and usually right more also. i just wanna say thank you for always helping out noobs such as me.

i understand that i just want to know how much bigger is the t-28

Hey guys long time. My car ran good for a whole 3 months without any problems!! ok i have a question, considering my little crappy t-25 said it didn't like 14 lbs of boost. my question is how much bigger is the t-28 compared to the t-25. Is it a definate difference or not worth my time. i...

someone plesae help me with adjusting my 95 talon tsi front wheel drive shifter cables. The car doesnt wanna go into 1st and 2nd gear. also when i put the car into reverse it makes a grinding noise. i recently replaced the clutch also, but the mechanic where i took the car to get the lower...

If u work at Mcdonalds take a bottle of their degreaser. it may sound funny but that stuff works miracles. i paid them for mine.:D

no prob thanks guys i will let you know if i get any extra boost. ~Rj`:talon:

my buddys just blew apart like that.... not as bad but still shattered the hell out of the internal housing. lol

ok so i did the removal, and i was starting to put it all back togather. And i am missing the upper vacuum hose that conects into the solenoid. It just up and ran away i swear to God. What does the other end of that vacuum hose connect to? i am not talking about the hose i took the...

pull your starter off, and see if the teeth show any wear.

the welds looks kinda crappy, but it may be worth it

i would have to say boost leak then. check everything

um i am not sayin anything but why would you put old gas into a brand new motor? dead octane. what kind of blow off valve do you have?

I have a 95 talon and the year is 2007

This may be a stupid question but what is the matrix? the heating element?

the only reason i said what i said is b/c he just installed bigger injectors, and all his afr's are zeroed out. which means the car should be running way rich

Ok i could be wrong. then explain to me how an ecu would recompensate for the lose of boost to only allow him to go 30 mph?

i bet your running way rich. A boost leak would not cause you to only be able to go 30 mph. And no an exhaust leak wouldnt either.

I came to a stop sign put it in first and it just free revs... I am pretty sure it actually goes into first, but it seems as though the clutch isn't grabbing. The clutch has almost no preesure as well. I have tried to bleed the slave cylinder, and least to say it made it worse. i really need...

thank u very much i found it.

i need to know where the slave cylinder is located. Pictures are very nice. Possibly like an exploded engine bay picture?

I did the tune up. And let me say wow what a difference, i mean it really does help a lot. Much more smooth engadgements, as well i changed the oil. I just used conventional high milalage.

wow 125,000 miles is way to much for 9000. not worth it man.

this is because the coating disapates heat faster, that doesnt mean the heat inst there while your driving.

no i dont but i am gonna do a tune up tonight. i hope that works a little. when i go to Echeck again i am gonna run 94 and hope that burns a little cleaner

What... Ohio does so have emittions testing.

Ok so i failed my echeck today, and i was 400% over the leagle limit of hydro carbons. Does anyone kno what i could do to improve this. I was thinking of a tune up, though i only have to put 200 dollars into fixing it. If it still doesnt pass it will pass because i mafe the effort.

if u could map out a under body spoiler, directing the airflow upwards toward the vent, it would release a lot of hot unwanted air. you would REALLY HAVE TO KNOW WHAT U ARE DOING, because if the air is directed in the wrong area(like myuber said) it will create more air turbulance under the...

thank you very much for all this imput. i am gonna try to tighten down all my belts tonight. if that doesnt work then i am gonna get a new belt and start there.

Ok so when i start my car it sounds like a belt has water on it. the sounnd lasts for about 7 to 8 seconds, then stops. but then i accelerate on the sound happens again for about 2 seconds. the funny parts is it makes the sound randomly, but it is getting worse and worse. the sound also...

I took my 95 Talon tsi to a gm dealership. they ran my vin numbers, and found that the ball joints had already been replaced. But i knew the shop manager, and they ordered them for me anyways. My point is that if you know someone that could help you like this than contact them.

just be carefull with the head gasket my buddy didnt line his up right and had to take it all back apart. its easy and he was an idiot but just be carefull