The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

Search results for query: *

  • Users: jjgrizz73
  • Content: Threads
  • Order by date
  1. jjgrizz73

    AWD swap problems...

    Hey everyone, so I finished up the swap a few weeks ago and didnt get to drive it due to the snow. It moved fine so I figured everything was A-ok. I went out for a drive today and found a pretty large problem. The car grabs as if the wheel is hanging up in the back. I threw it on the lift to see...
  2. jjgrizz73

    Tri State Dsm/Evo Meet May 1, 2010 in PA

    I am not running this, however my friend Brian (yellowevo42) is. Any questions I can pretty much answer though. Hope to meet/see a few guys there:Looking to have another meet this year on May 1 , 2010 at 10am . All Mitsubishi's are welcome. The meet will be located at 161 Brooklyn Street...
  3. jjgrizz73

    Transmission or Clutch???

    Hey guys, so right before I put my car away from winter I was cruising near my house on top of second gear WOT right before I was getting ready to shift I felt something pop...no gears what so ever. I was lucky enough to coast down the hill to my house. I was planning on replacing the...
  4. jjgrizz73

    Turbo gauge cluster in non turbo?

    Did alittle searching but only found 1g stuff. Has anyone swapped in a turbo cluster into a non turbo car? I dont care about boost gauge I just want it to look stock and get rid of the indiglo faces in them. Plus I like the 99 style my buddy has for sale. Thanks!
  5. jjgrizz73

    Time for a built trans?

    Hey everyone. I wanted to get some opinions. Im converting my spyder to AWD now, I had an AWD tranny in it with the welded center diff and VCE to run FWD. I ended up blowing out the front diff in it...but now that it will be AWD should I spend the money on a TRE or Shep or just throw a stocker...
  6. jjgrizz73

    2G Transfer Case Identification

    Hey guys, I have a transfer case in my garage. Its a 23 spline but is there any way to check to check the numbers to see what year its from. Im purchasing a rebuilt trans from shep soon so I need to know what year so he can build it to spec. The only numbers on the Xcase are: 2L16 5 607 221...
  7. jjgrizz73

    AWG Swap suggestions?

    Hey guys I wanted some advice. I plan on picking up a subframe with a non lsd diff (auto) in it. I want to make sure..will the axles work with a non lsd diff (manual)? If so should I just go with a non LSD or buy an LSD diff and try to find lsd axles and not use the ones I have with the...
  8. jjgrizz73

    Rear subframes...

    since the classifieds are messed up and i cant post up, I figured I'd ask if anyone knew anyone or the best place to buy a rear subframe setup for a 2g awd. I just wanted to buy a parts car but my parents are up my a$$ about having a "piece of junk" in the yard and its really not an option for...
  9. jjgrizz73

    Valve cover bolt gasket/oring

    Hey guys, anyone know where to find these gaskets. I have a hyundai valve cover and the holes for the bolts are much larger and needs a gasket/washer underneath to stop oil leaking. They came on my JDM motor when I bought it and then when I had the car at a garage they were replaced but he...
  10. jjgrizz73

    Coolant pressure problem...

    Hey guys, need some opinions on this. Last year I had some overheating problems so during the winter I changed the thermostat(gates), hoses, Rad, fans, and cap. The problem I'm having is that when I fill the coolant up properly and fill the tank to the fill line and take it out it pours the...
  11. jjgrizz73

    Some ideas to avoid GM Maf/Maf-t

    Hey guys, right now I have a 3.5" GM Maf with Maf-t setup with a Evo VIII ecu. I do NOT like the fact that its running a constant air intake temp which messes with my tune horribly in the summer between night and day. Whats the best thing for me to do? Go to evo8 maf, wait for speed density...
  12. jjgrizz73

    Building a 2.1L need some info...

    Hey everyone, so Im going to go with a 2.1L destroker because I already have the 2.4L block from my 97 spyder that I swapped a 4g63 into. Im picking up custom pistons to use the standard length rods to make the build a budget build. Im also getting it machined obviously to use a DOHC 2g turbo...
  13. jjgrizz73

    Breaking up in high RPMs

    Hey guys, ok well I had this problem for a bit now and I've done a few things to try and fix it but anyways this is the situation. The car breaks up really bad (pops) at high RPMs and at WOT. It doesnt really break up if the car isnt at WOT only when that pedal hits the floor it breaks up. I...
  14. jjgrizz73

    3g and 2g spyder rear seats the same?

    Hey guys, does anyone know if the 3g rear seats in a spyder are the same as the 2g rear spyder seats? They look pretty similar but Im unaware of the dimesions. Heres a picture of the 3g rear seat setup:
  15. jjgrizz73

    Possibly selling the DSM...?

  16. jjgrizz73

    O2 dump right on I/C piping :(

    Hey everyone. I installed my new Atmospheric o2 dump along with SBR's short route FMIC and now the dump is almost directly on top of the I/c piping coming out of the turbo. I have some heat wrap and the silicone spray for it, but I'm unsure if it will really help too much. What do you guys think...
  17. jjgrizz73

    Using my 4g64 trans on 4g63t

    Hey does anyone know how much different and have any reasons why throwing my 4g64 n/t tranny onto my 4g63t would be a BAD idea? My tranny is in need of a rebuild and figured I'd try and run this trans for the rest of the year until I had mine rebuilt to handle more power. Im going to assume the...
  18. jjgrizz73

    DSM/Evo meet Scranton/WB area

    Hey guys, my buddy is planning a DSM/Evo meet in the Scranton area coming up in late May. Exact date and time is TBD depending on peoples inputs. If anyone is interested, let me know!:hellyeah:
  19. jjgrizz73

    Aftermarket steering wheel (searched)

    Hey anyone have a clue if I will be able to successfully wire up the horn to work with a steering wheel with this design. It does NOT utilize the push button/ring for a ground so the threads on here will not really help me. I do not want my cruise so thats not an issue. If anyone has wired up...
  20. jjgrizz73

    With my setup, how big of injectors for 50trim

    Hey everyone, I know theres a few threads on here but Ive seen mixed things. Ive seen 680s are good size and then others saying a 50trim can max out 750s. With my bolt ons, listed in my profile, I pretty much have everything bolt on I can get, what size injectors should I be looking at. Keep the...
  21. jjgrizz73

    Philly Auto show DSM

    hey guys, anyone get the chance if you live around philly to go see this years auto show? In one of the "dub" rooms theres a 2g eclipse they pretty much masacured :barf:...atleast it was a turbo 420a
  22. jjgrizz73

    Ok so AWD conv. or new FMIC?

    as title says, which do you think I should do. I got a deal from a guy that wants 600$ for almost everything i need for an awd conversion besides driveshaft (already have the trans) or a new FMIC from SBR or ETS (~800-900$), which would be a little better than the GReddy 24v kit I have now...
  23. jjgrizz73

    Should I upgrade to a bigger turbo?

    Hey everyone, I need some opinions and options here. If you can look at my profile and see my mods. I want to be somewhere near 425-450whp this year. But the EvoIII is a very hard turbo to get that out of. I have a Holset HX35 but throwing that on the stock block might be silly(im saving it for...
  24. jjgrizz73

    Stubborn Reverse...any ideas?

    Hey guys, I took the trans apart when I got my jdm awd trans. I put a welded center diff in with a VCE. When I put everything back together it pops out of reverse when any real load is put on it. I have to slip the clutch when using reverse just to try and keep it in. Also I get a very very...
  25. jjgrizz73

    Just ranting...

    Well not sure if this thread will be deleted or not but I just wanted to see if anyone thought the same as I did. Im sick and tired of hearing everybody say how DSMs need all the cash to be kept running and how they are constantly breaking down. Like what are these people doing to their cars...
  26. jjgrizz73

    RM lip

    hey everyone, is there anywhere to purchase these (non c/f) other than mach v. just wondering. Thanks!:dsm:
  27. jjgrizz73

    Identifying Evo3 cams

    Hey guys, I bought a 2g JDM motor but I believe i recieved the EvoIII motor, has all the signs of one anyways. I put a set of HKS 264/272 cams in it and have the stock cams out. i was wondering if they are any different than stock 2g cams and if they are how would I be able to tell if they were...
  28. jjgrizz73

    AEM Tru-boost questions

    Hey Im looking for someone running a Truboost. I installed the gauge and did the wiring (correctly) and hooked the manifold pressure source with a "t" off the bov line since there were no more ports on my JMF manifold. When I start the car the gauge reads -3.x and continues to rise to -5.x, etc...
  29. jjgrizz73

    Another: What color to paint my dsm thread

    Hey everyone I was wondering what opinions you guys have about the color to paint my car. Nothing fancy (pearls,iridecent,kandys, etc.) just a regular color. Doesnt really need to be a eclipse color. You can see my car in my gallery or profile picture. Has a black top btw. Im thinking black with...
  30. jjgrizz73

    Car starts then shuts off quickly after upgrades

    Hey everyone. So my car ran great and I decided to do some upgrades:3.5" Maf / Maft setup JMFab SMIM FP exhaust mani 650 injectors, etc.Now, I know there are two vacuum ports on the intake that are open and the BOV vac. line is not hooked up. But I decided to see if it will start up...
  31. jjgrizz73

    [RESOLVED] Help me pick, show or go??

    Hey guys, I was wondering what you guys think. I put alot of work/cash into my car this year and I dont plan on stopping. Right now Im interested in buying myself a christmas gift. Its between a c/f trunk from hiRev for the spyder or the snow performance meth kit. What do you guys think I'm so...
  32. jjgrizz73

    No respect for dsms

  33. jjgrizz73

    No respect for dsms

    hey everyone, so last night i was just relaxing when some local kid with a big mouth messages my friend, telling them they can smoke their eclipse, etc. My friend mentioned mine and he proceeded to talk shit about my car. First he wanted the mods, sent them to him, then he wanted pictures, well...
  34. jjgrizz73

    Tuning/Logging problem

    Hey guys, I have a problem with my connectors...it seems one is missing for the OBD-II and I have the side panels and console out of the car, still no where to be found. i was wondering if anyone had any ideas or help in this matter since it is hindering me from better tuning and logging my car...
  35. jjgrizz73

    Pimp my Ride on MTV2

    Hey guys, turn on MTV 2 to watch these guys completly distroy an eclipse it looks pretty sad...:barf:
  36. jjgrizz73

    What engine did I get?

    Hey guys i did read the threads on here about it but I was wondering if anyone knew for sure what motor I got when I bought a JDM motor from Canada. I was supposed to be a 2g 7 bolt eclipse motor. It came with a big 16g, NO cyclone intake(plain silver), black top CAS, yellow top injectors...
  37. jjgrizz73

    Winter 2008 builds

    Hey everyone, figured I'd get some opinions on my build and get to hear some of other peoples plans of the winter of 08 and spring 09. Lets see some pics too!Mine is slightly small only: jmfab intake, hks 264/272 cams, atmospheric o2 housing, jmfab mini battery, AEM fuel rail, FIC 650...
  38. jjgrizz73

    General 2G chip burning

    hey guys, my buddy flashes and chips hondas and flashes his evo for tuning and I just recently bought the socket and Burn2 eprom burner so he can start burning chips for me. I was wondering what kind of boundaries I am looking at going into this and how good of a tune I will be able to get from...
  39. jjgrizz73

    Widest Tire

    Hey guys, I did look around but I just wanted to make sure...I just purchased some Rota G Forces 18x9 with a +30 offset. I was wondering if anyone knew if running a 245 tire would work out fine? Maybe with more rubber than my 225's I can stop breaking them loose everytime the turbo spools from...
  40. jjgrizz73

    Data Link Connector problem

    Hey everyone, I was going to hook up a OBD-II scanner on my 97 eclipse spyder and noticed that the 12 pin connector is missing that is supposed to be next to the 16pin one. Anyone have any ideas of where these wires would be or any solutions? Thanks alot
  41. jjgrizz73

    block swap

    hey everyone, I was wondering how hard it would be to just swap a 6 bolt block for my 7 bolt 4g63t? I want to use the 2g head, intake, etc so would it just be simple to throw everything on a built 6 bolt block? I know I'd have to switch the tranny, flywheel, etc. Thanks for the help
  42. jjgrizz73

    Wheel offset with bbk

    Hey guys I was j/w what offset I should be looking for with a big brake kit? I dont want to buy some new wheels to have them not work Thanks alot!:dsm:
  43. jjgrizz73

    Slow Spool

    Hey guys I know theres been a few threads out there for this but every case is specific. I did a turbo swap on my spyder and upgraded the motor before putting it in. The turbo isnt spooling normally and just creeps up to about 12lbs at redline. I checked the MBC by disconnecting it and it still...
  44. jjgrizz73

    Oil Cooler Question

    Hey, it does appear that my JDM 7 bolt comes with an oil filter housing that uses an external cooler. I was wondering if using the 1990 cooler would work just fine with this oil filter housing? There are just 2 fittings coming from the OFH correct? Thanks
  45. jjgrizz73

    Four Wire CAS

    Hey everyone, I bought a JDM motor that I know if a 97-99 becasue of the CAS and 7 bolt. I was wondering if anyone knew if the 4 wire cas is from a 99? I have a 98 Wiring harness which only has a 3 wire plug so is there anything that can be done? Thanks for any help:dsm:
  46. jjgrizz73

    UPS blows

    Hey guys, just blowing off some steam after UPS lost ONE of my HKS camshafts...not both just one! Im sick of them, they always screw something up and why would a driver deliver a package that clearly was empty and was busted open. So now I have to do this claim process that I hope is quicker...
  47. jjgrizz73

    Test pipe question

    I want to run a test pipe with the heat shield welded over it to look like a cat but would I be able to hook the wideband up to the sensor in the cat back and would elminating the sensor in the cat flip the CEL? Thanks! :dsm:
  48. jjgrizz73

    Turbo Build anything else needed?

    Hey everyone, I just bought all these parts for a turbo build I am doing in the next few weeks. Please give me any suggestions or opinions. Thanks alot!-4g63t JDM motor -MHI Evo III big 16g turbo -Greddy 24r FMIC -Greddy upper and lower intercooler piping -Greddy Type RS BOV -Apexi...
  49. jjgrizz73

    Bought JDM engine got problems

    Hey everyone. I bought a JDM engine with transmission (a 4g63T). The engine came with an AWD transmission and I have a FWD spyder. I heard you can use the AWD but I'd rather use a gs-t transmission. Would the transmission swap be very simple and just bolt in or are there other problems I'd run...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top