Okie dokie. This problem is getting worser and worser.
innovate wb is showing e8 which is a o2 sensor heating out of range. I bought a new o2 and switch it. Right off the bat shows e8 again. I now now it's not the o2 sensor itself. Tested it, 16 ohms. 2 good working sensors.
Car is running pig...
Checked my IAC today so that required I remove my battery. After 30 min or so messing, cleaning, and checking my OK IAC (good 31.1 ohms) I installed my battery back on.
Expecting to input the code back on the radio behold, everything was still there. My channels and radio station were still...
My car is being a little b**** lately. Compression and boost leaks are okay, vacuum is okay.
Code P0170 and 90170p popped up. That is fuel trim malfunction having to due with maf, injectors, o2 sensors. Those are all replaced.
Another code 90125, that is coolant temp sensor. Probably causing...
One day my check engine light came on. Showed code p0170. Got my innovate wideband going all crazy.Example 1. When I start the car the wideband will start bouncing around 9.0- 22.4(digital btw). And if I drive the car like this it will sputter and hesitate. Wideband will show around the...
Car is on and in idle. When I turn the steering wheel car loses a good chunk of power noticeable that the idle drops a good 3-400 rpms. You can hear the engine struggling to idle when I constantly turn the steering wheel.
I also been having knock issues when I get on the throttle. I have...
I can't find what Im looking for on here and on google. Maybe I'm typing it wrong. I want to hook up led lights to the back seat so my sons can see in the back when I open the door. Where could I find the wire so I can splice into it.
Thanks.
Last year my mom became very ill. Suffering from diabetes, high blood pressure, stroke and cancer at the age of 44- 45. She fought and fought until she went out. She left my dad, my 5 brothers, three sisters, 2 sister in laws, 1 brother in law and 4 grand kids.
As a family we are very upset...
Carbon creations lip. Brand new just dusty from storage for two years, need to make room. I have everything I need so Im not looking for trades or anything. Cash only. I will not ship.
Located in fresno. I could meet you if within 20 miles from fresno. I work in the food industry so I do...
My car has been knocking around 2500 rpms randomly lately, gears one through five. My question is even though it is knocking, should the wide band still fluctuate around 14.7?
Since cold weather is kicking in. My car is jerking in the morning. Not only that when it gets to operating temp it also jerks and knocks a lot (about 20-40 counts)
Which leads me to something temp related. I thought it was my coolant temp sensor so I changed it. Car still does the same...
I was driving around town in stop go traffic. I would say about 7-10 miles worth on a 80 degree day with coolant temps doing fine. As I was stopped at a light ready to go the car stumbled and shuts off. I thought maybe I miss balanced the clutch (after 10 plus yrs on stick shift cars, odd)...
I have hks 264/ 272 waiting to go in. What part of ecuflash you guys use to dail in the idle? Is it somewhere in the idle table.
I'm assuming base idle is 750, so to maintain it I'll just bump everything in the table up 150 rpms somewhere around the 900 rpm for base idle?
No rice intended. Mods up to date.
When I first bought my car, it was making good bov psh LOL, even with the plastic 2g bov. Now no matter what bov I put on it doesn't make any psh noise. I have tried the loudest one, the hks and it doesn't even squeal. Now that leads me to assume maybe...
Hi California.
I have a clean set(4) of GSX 2gb wheels for sale. I bought it from a member on here. It's pretty clean and tires look like they have a year or a year and a half of use left. Still stock silver and chrome, not painted.
I'm willing to drive about 20 miles out to meet up. I'm...
Okay I don't know how many of you have kids that sit in your 2g. I have two sons that sit in my car that still uses car seats. If any of you have broadway rear view mirrors you know it blocks some light shinning from the rear view mirror when the doors are open. Nonetheless the light still...
First off I don't even know what title to put for this thread.
Okay! Some random moments when I pop my hood I will hear a popcorn noise coming from god know where. I try to pin point it and sounds like it's coming from the back of the manifold engine block area.
The noise is hard to...
I have a evo 16g, fp manifold and stock down pipe. I can not get the punishment racing o2 to fit. It wont align do to the oil stick. Any ideas. Nothing was mention in my searches. Either people ran external o2s or stock mani.My o2 housing is this one. Different from the pix which...
What brand tool name do you guys use to get that stupid o ring to stick the hks bov to the flange. I bought two snap ring pliers and for the life of me can not get the o ring into the flange.
Stupid me, bought OEM tool from autozone, and changeable one from napa. I learn my lesson. No more...
Wow, I guess alcohol injection isn't to popular any more LOL Not sure if Ill get many responses.
I'm looking into alcohol injection. I hit the track a lot in the summer.
I want to know why/ how to pick the right alcohol injection kit for me. Why the other name brand over the other. Is the...
Okay I don't like to cheap out on parts but with this little piece I think I'll just take the risk and save my self 15-10 bucks and add little grease work.
I'm not looking to spend 50+ bucks on a flange adapter.
I've been looking on ebay and comparing the flanges. Mazda speed 3 and wrx flange...
I need help with my 2g before I install some serious go fast parts. I need a leak down test done and why my car is getting 30+ knocks on 2-3 gears at 2.5-3k rpms.
Any trusted shops you guys use that's good to imports.
Price range? I don't have time to touch it anymore.
Gas station on Willow and Ashlan has e85 and 107 octane... Not sure about the 107, heard from a friend on fb.
Open 24/7. I'm going to pump gas there tonight check it out. 91 is only 4.09 right now... Cheapest in Fresno.
My car has been lagging a lot during 2nd- 3rd gear on regular street driving conditions. I log it to find a lot of knock 30+. What would cause this? Phantom?
What could this be. The other gears/ rpms are fine with no knock.EDIT:
I notice this happens around 2.5-3k rpms. My ceddy knock...
I got brand new hks 264/ 272 on the way. Let's not talk brand please.
So what's it like. I can imagine it could get annoying or irritating in the morning or late night for our neighbors that is.
What Are the Symptoms of a Clogged Catalytic Converter? | eHow.comHas any one of you guys experience a bad/ clogged catalytic converter. I have been having trouble with my car lately and the car will loose tons of power when the a/c is on or I have 3 passengers with me. I did everything I...
Difference in clutch slipping in low rpms (1rpm - 3k rpm) vs high rpms (3k rpm and up)
Background
For over two years I can not seem to figure out what the problem with my car is. I did every maintenance and nothing seems to go right. I thought I was running lean, logs check out good, wide...
Finally looking into getting a wideband. I was wondering which works better with evoscan/ ecuflash... aem or innovate? Or it doesn't matter?http://www.dsmtuners.com/forums/newbie-forum/380971-best-wideband-setup-evoscan-logging-ecuflash-setup.html
Post #4 last paragraph got me confused...
I've been searching online the whole night. The problems seems very similar. Anyone has a certain experience that could narrow my problem.
At idle I'm holding a steady 17hg. I've been reading that bad fuel filter could cause hesitation, poor gas milage, bucking etc.
With logs of evoscan I...
The new version of ecuflash is out version 1.44.
Where the heck do I find the read, write and test mode at? I can't rewrite my ecu cause I cant find it? I need to rewrite to go smog my car.
Did you guys get it to work?Never mind. Answer my own question.You click on the sprocket on top (by...
Who has pass smog with an evo3 turbo before?
My plan is stock EVERYTHING(besides turbo). Use side s pipe to connect to stock side mount intercooler. I'll cover up the pipe with some black cloth or something to pass visual.
Tech here don't know much about dsm's.
Will a boost gauge matter?
I didn't find this in the ecuflash thread or maybe I missed it. I was reading on evom and something like flashing a ecu limit came up.
My question is, is there such a thing on the 98-99 ecu's. I must of flashed my over 50 times and now I can't seem to input any flash changed into the ecu...
Okay I searched on google, dsm talk, dsm purity, and tuners and got mix reviews. Found a lot of info for automatic limp mode but I'm 5 speed.My deal is one day I launched the car around 4k rpm:tease:
Ever since then the car feels really sluggish. When the car is cool or before operating temp...
What the hell is this world coming too? I'm not sure if this applies to the whole country but here in California we are required to pay for preschool now, which I remember my entire life (28yrs) been free.
School had started 2 weeks ago and my son has not attended preschool yet. They finally...
Aight guys! It's that time of the year. Let's get ready for the meet some of us are dying for.
I want to set a date for sometime in September before the weather gets ugly. September so some of us aren't surprise of the day and September so we have enough time to get ready for it. Also reason...
Here's the story. Last week car just taking a hard time to start. As the week progress it took longer and longer to turn over. First I thought it was my fuel pump cause I have been having knock and bogging issues.
Well, today my car started to smell like crap, shit, sulfer, acid etc. I...
I have no idea where to put this thread because I don't know what is causing the problem. Mechanical or electrical or spiritual a.k.a. the usual dsm curse.
Anyways, my car is bogging or hesitating when I start to drive. Example would be when I'm in first gear and let go of clutch, gas to get...
This is real! I saw it with my own eyes which are 20/20 vision. There was about 3 occurrences and I thought I was crazy at first when I saw the one that happen around 6 o clock. I know my astronomy and air planes well and I thought it was a star at first but I know there was no star that...
The other day I couldn't get the cable to read. Well, I just got my 2.0 cable to read. After it reads the ecu this pops up. I press next but nothing happens.And Second picture, which ecu do I choose
Search water pump failure and over heat on freeway but didn't come up with much.
I'm about to go on a 160 mile trip and wonder if my car was up to the task.Around town driving I show no indication of overheating. coolant needle stays right in the middle. But as I drive on the freeway...
Im sure this is a very newb question but I'm still kinda new on how to read logs and tunning. I just started the car so idle is still around 800ish rpm. Throttle is 10 without pressure.
Is this timing normal.
At 750ish rpm my timing is around 7- 11 degrees. thanks
I just installed evoscan 2.9 and when I go to log my car. It say's there's an overload and disconnects. Anyone ever encounter that problem. It was reading fine the other day.Also I read a post here bout a year ago and now I can't find it. How do I get my computer to read elg files...
Aight guys! Got my 16g in and planning to go see if I make a significant change from that t25 15.3 1/4 mile.Just letting you guys know if you want to tag along.
Auto Club Famoso Raceway
I did tons of search and coming up with weird mix answers.
I'm ready to drop a new evo3 16g in and don't want to worry bout the motor handling the stress.
I got high compression 180-185-190-185.
From my results I read that it maybe due to carbon build up. I did seafom twice in 3 months and a...