The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support ExtremePSI

Search results for query: *

  1. 96 gst stay's running after cas sensor is disconnected

    I'm having the same problem but mine won't start unless the Cas is unplugged. I have already replaced the Cas and crank sensor. Still no luck.
  2. how do you test injectors?

    You could go rent a noid light set if you have a local orielly's around that might help you out with out spending to much money.
  3. Oil filter cut away Fram & WIX

    Lol lots of green blood in here. I'm an assistant manager here in the CO. The Micro Gaurd is made by Fram. Nice to know there are such a diverse group of people to get the best of the best.
  4. Western slope

    Lol I bent a shift fork and hopefully nothing else. I hope I didn't break a roller pin... And I killed my clutch
  5. Western slope

    I'm not usually in junk town but hopefully I can fix my tranny to get down there.
  6. Tranny stuck in 3rd. couple questons

    My trans broke on me last night. It locked itself in first, I managed to get it out. Now it wont go into first. Fifth and reverse are very difficult to go into as well. sorry for high jacking the thread.
  7. New Ride 1990 TSi AWD

    Looks good man. I recently rescued my talon from being parted out. I would give u my grey leather front seats but I live in Colorado. I have no use for them.
  8. Just bought my first DSM last night

    looks clean man nice find
  9. S2000 Cluster Swap

    Kick ass man. Looks good.
  10. Our Dogs [Merged 10-8] dog threads

    Here's mine she is a 2yr old AKC boxer named SillaBy awd_tsi at 2010-10-16By awd_tsi at 2010-10-16
  11. breaking ball joint off spindle

    My ball joint was very hard to remove also, I ended up having to use the heat wrench to get it out. Do you have access to a ball joint separator?
  12. Intermittent ECU Offline

    I was also having a similar problem, although I am still running a OEM ecu the harness is the same. My ecu was having intermittent problems. I would touch the ecu and it would turn off. Some times it would not turn on or the MPI relay. I checked my harness and it seemed fine. Then I checked the...
  13. Cluster ownage

    I had to make a jumper to have my cluster work. I was also gonna change out the factory fuel gauge but I didn't want to go to the trouble of figuring out the sending unit for it. I got lazy and stuck with what I had.
  14. Cluster ownage

    hey wats good jeff.
  15. Cluster ownage

    Nice job. I actually did the same thing awhile ago except I also replaced my water temp gauge as well. I didn't want gauges all over so that is the route I went. Looks good keep up the good work.
  16. The RAVEN: An 8s street car journey continues! (PT.2) *New Turbo Post!*

    damn man that turbo is a monster. i have a HX- 55 to put on my car one day when it is built good luck bro.
  17. 2G Can't find intake pipe

    Its called the upper intercooler pipe. (uicp)
  18. Ugly painted interior

    I think he wants to remove the old paint because it is chipping away. I would clean it a bit, take off the paint I could and just repaint it again.
  19. What do everyone do for a living

    Oh I know this, it just brings in some extra dough lol. They couldn't order the right part if there lives depended on it lol.
  20. Ugly painted interior

    There is some stuff I use called "Citrol" from a company called Schaeffer it works good or you could try some general purpose adhesive cleaner from 3M. But i am not sure if it would harm the plastic. You might want to try that on a corner you wont see just in case.
  21. What do everyone do for a living

    Im an I-car certified auto body technician by trade,(Wyotech grad.), but where I live there isn't much work in that field, now im a MECP certified audio/video installer. I also build cop cars from the ground up. I also do some mechanical work on the side, and work at O'Reilly's part time. Pretty...
  22. Ugly painted interior

    Try some type of orange cleaner. Thinner might eat away at the plastic.
  23. gutting harness is this the c-67 connector?

    What are you trying to unpin?
  24. Pastor laserspeeddemon

    Congrats man, i hope all goes well in ## work as a pastor and that God may lead ## way so that u may enlighten other peoples lives. BTW i like ## screen name Laserspeed"demon" lol it made me chuckle.
  25. How to properly clean block/crank before assembly?

    this is a good thread. http://www.dsmtuners.com/forums/cylinder-head-short-block/362154-how-final-wash-engine-block.html
  26. Subaru pic. What year is this car?

    lol they do have problems in the drivetrain dept. and they are heavy and not too fast, aswell as rolling like a boat on water but they are nice cars. They made to try and compete with the 3KGT although they fell short. i like my svx even wit all its kinks. Parts are hard to come by FYI
  27. [1g AWD] Rear Shock Removal

    wow all i did was jack up the side i was working on, let the suspension hang. took the bolt out and used a pry bar to remove the bottom mount first
  28. [1g AWD] Rear Shock Removal

    Where u able to remove the bolt? i just did this a few days ago/
  29. JB Weld, Driving on cracked valve cover?

    mine is jb welded its goin for 3yrs now so u should be fine.
  30. How to Remove Shift Cables??

    well on my 91 i did unhook them from the tranny and the bracket holding them as well as the shifter base and the shifter. at the firewall mine where bolted in and a bracket holding them down right in front of the ecu. pull my cables into the cab to remove them. I had to hope it helps
  31. awd 5 speed swap

    I just finished the swap on my 91 tsi. You will need shifter assembly(since yours is a 90 u will have to use a 90 shifter assembly because they are different than later yrs.), shift cables, peddle assembly, master clutch assembly, clutch line, tranny, tranny mount, tcase, rear end(5 speed have...
  32. Sprint lowering springs

    i have them on my 92. They ride a bit hard but i like them.
  33. Headunits

    Alpine all the way for me.
  34. Registering a car out of state to avoid smog?

    you could always register it in a diff part of the state where smog laws dont apply? Where i live they dont have a smog check. just a thought
  35. 2g maf, 750's, walbro 255, eprom ecu chipped for said parts, car wont hardly run?

    You need a AFPR to keep the 255 in check. my wouldnt even idle when i installed it. good luck
  36. [email protected] on the 16g

    Wow man congrats she hoots and scoots.
  37. Rare part on your car

    My 91 talon has leather seats, motorized sunroof, and a HKS TB elbow (no longer made). not to rare though.
  38. 92 Laser AWD build

    looks good, glad u didn't hurt your motor. good luck
  39. Boosting lower than WG spring

    Sorry bro from what i have heard, the spring on there is ### u got to work with. you cant go any lower than the spring rating
  40. 16g with these mods on my 93 gsx

    Do you have a AFPR? That wally 255 will most likely over run your OEM on.
  41. Laptop Mount

    Well im not sure if they make laptop mounts for DSM's but here are a few companies that do make them. Havis Shield, Jotto Desk, and i think Tuffy security products do too. You might have to get a universal one and see what you can do. These are some of the companies we use at work to get the...
  42. Sound system's!

    I have Alpine Type R's 6 1/2 all around. Boston G5 12' in a 1.5 cubic ft box with polyfill. Alpine PDX 1.1000 mono amp set to 2 ohms, Alpine PDX 4.100 4 channel, Alpine CDA-9855 head unit, 160 Amp alternator. Sounds good for me.
  43. What month were the first talons manufactured?

    The way the car manufacturs classify cars is the middle of the year (june) or the sixth month till june of the next year is ### the classify it as a production yr. So if your car was a 90 model it could have been made from june of 89 till june of 90. They still do that to this day. It may be a...
  44. Evo 8-10 Brembo Calipers DSM Conversion (for 1g too)

    Are u gonna be selling these brackets? if so how much> Pm?
  45. DSMtuners on your mobile.... now available - just need help testing

    Works great! Thanks a lot Luda- I'm still getting used to not seenin any pics on there though. They don't load very well. I'm on a BB bold 9700 EDIT: I'm having trouble posting with berry blab it say's I need a registered version. I went to the web site but there is nothing but the links to...
  46. CTS-V Brembo with 14" rotors bracket attemp

    So i have a 1G and am very interested in this brake upgrade. So my question is with these calipers i would wanna run a 17 inch rim if possible. Would i have to run 13' rotors? I was also looking into 3kGT calipers because I could fit evo rims on them, or so I've read. Would these calipers (CTS-V...
  47. Auto GSX Build

    Sick build, looks clean too good luck bro
  48. Help with ECU 1Ga to 1GB diff

    oh ok thanks alot
  49. Help with ECU 1Ga to 1GB diff

    Today i just picked up a 91 AT talon TSI AWD. It was a mess lots of stuff unbolted and just laying around. Anyways i got it all together it ran good for a minute or so then it started idling ruff. So i looked for some usual signs of these symptoms. That is when i decided to change the ecu(the...
  50. DSM managment running VW 16v turbo

    Ya evo 8 ecu can run speed density. im doin the evo ecu in my 1g talon. y didnt u go with the 20V motor? That motor is a trooper. did u just wanna go with some thing different? Me and one of my friends made his 96 jetta in to a 2 door with a golf quarter panel.
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top