The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Fuel Injector Clinic
Please Support Rix Racing

Search results for query: *

  • Users: mjboehm
  • Content: Threads
  • Order by date
  1. mjboehm

    GVR-4 VR4 Galant Tranmission ID

    I recently purchase a vr4 galant transmission. I looked up the number on the transmission it is w5m332nqbm lc4391 but the vin is this ja3cx56u2mz010335, What i have read is that it is a 5/92 or newer transmission from the transmission code but the vin says it is a 91. I am a little confused...
  2. mjboehm

    For Sale Powder Coated Valve Covers

    Powder Coated Valve Covers for Sale Super Mirror Black With Alien Silver Letters. Super Mirror Red With Super Mirror Black Letters Red Wrinkler With Alien Silver Letters All Valve Covers have been striped, cleaned, outgased, soda blaster and Powder Coated Never been installed after powder...
  3. mjboehm

    For Sale Powder Coated Valve Covers

    Custom Powder Coated Valve Covers for sale All Valve Covers are made to order Many Colors Available pm for more detailplease delete if not allowed
  4. mjboehm

    1G Car Wont Stay Running

    To start off car ran for 6hrs fine in my garage. I went out to start it getting no spark then I changed out everything(cas,coil,ptu) getting spark, fuel and compression. Car will start and run ?for 5-10 seconds and dies. Then try to start the car again and just turns over. I have checked the...
  5. mjboehm

    Oil in Exhaust Port After New Head Install

    I had head rebuilt with supertech bronze valve guides, super tech valves and supertech guide seals. The motor has about 300 miles on the bottom end.I used arp heads studs with a mitsu 4 layer metal hg(i was told to use copper spray).I did a compression test on the car before I started it. The...
  6. mjboehm

    oil in exhaust ports after rebuilt head install

    I had a machine shop build me this head. I put the head back on the car started it up and noticed it was smoking really bad oil was coming out of the exhaust ports. So I replaced the vavle guide seals in the head which had 3 cuts on each valve guide seal. The car compression is 185 across the...
  7. mjboehm

    Valve Stem Leak

    I had question, Is it possible to have good compression with valve stems installed incorrectly. I just had a head rebuilt and they installed the valve guide seals wrong.I had to replace all the valve guide seals(found this out after I installed the head).Any info would be great thanks
  8. mjboehm

    Fort Myers meet

    I am wanting to start a dsm meet in this area if anyones intrerested please pm or email thanks
  9. mjboehm

    Machine Shop Tampa Bay Area

    I am looking for a good machine shop in the tampa bay area that can balance a rotating assembly also line hone and do basic machine work. thanks
  10. mjboehm

    Smoking after new head install good compression

    I have a 1990 tsi with a 2.3 liter stroker just put at rebuilt head on my car. I used a mls hg and I also had the head cleaned,decked, mangfluxed, etc. I went to start my car it started smoking like it did before. I did a compression test the results were 190,185,180,190. The motor has less than...
  11. mjboehm

    [RESOLVED] cams install

    I am getting ready to install my cams back in the car and my question is how do I know which way on my intake cam do I align with the cas? Is there any makings of the cas to know which way I have to line it up with the cam of does it matter.I know it goes in the slot at the end of the cam I just...
  12. mjboehm

    mitsu. metal hg install

    I have been having this problem with my car burning oil and oil on my piston. i just put a stroker motor with arp head studs in my car then my turbo took a crap so I put a new turbo on it. Then I replaced the head also. Since I had a metal hg on the car I was told that they were reusable from a...
  13. mjboehm

    Otto R Racing Seats

    Has any one ever heard of these seats otto r racing seats i have found that you can buy a pair of them around 200.00 with sliders but with no brackets? I read some where that you can use the stock seat brackets with these seats is this true?Any info would be great. thanks.
  14. mjboehm

    schely valve spring compressor

    I am getting ready to buy a valve spring compressor to replace my valve guide seals. I was wondering does anyone know the difference between the 2 schley valve spring compressors. There is a sp-91400 Schley Products (SP 91400) Universal Valve Sping Compressor - SP 91400 and the sp-91400a...
  15. mjboehm

    fuel injector size

    I did a little research on this subject. I am getting ready to buy fuel injectors. I really don't know what size injectors to get. My setup is a 2.3 liters stroker,fmic,walbro 255,to4b-vtrim,full 3" exhuast,avc-r boost controller,gm maf. I am getting ready to buy fpr and keydive chip so thats...
  16. mjboehm

    Thread size tp plug coolant line for the turbo

    I didn't know where to post this I need the tread size to plug the coolant line that feeds the turbo becasue my new turbo dones't need them. The pipe I am talking about is the one that connects to the water pump. Has anyone one done this if so what were you differnet methods. Please advise. Thanks.
  17. mjboehm

    car smoking after new head install

    This past weekend I put a new head on my car this weekend. The reason I did this is that I have had a problem with the car burning oil. When I put my motor on in my car it didn't smoke until my 16g took a crap so I put a new turbo on it and still smoked som replaced the head and the car smokes...
  18. mjboehm

    setting the timing in a 90 tsi awd

    I have a 1990 tsi awd. I just finished putting my new head on the car. I read the different threads on setting the cas. I am just wondering which plug to use on the firewall. There is one plug with a rubber cap on it and there is also a another plug thats next to it. It is a single plug not like...
  19. mjboehm

    oil on top of my pistons

    I just pulled the head off my car because it was burning oil really bad. When I pulled the head off there was oil on top of cylinder #2 there was about a tablespoon full of oil on it. Also there was oil on the other cylinders also but not that much. My bottom end has only 120 miles on it and it...
  20. mjboehm

    2-3/4" intake question

    I have at o4b-vtrim turbo and I am getting ready to install it on 90 tsi awd and I have a gm maf in my intercooler piping but no translator. I need to use the 2 3/4 intake a temp solution until I buy a translator.Does anyone know how to make one or where I can buy a cheap one. I looked on ebay...
  21. mjboehm

    car burning oil,have video

    I have a problem with my car burning oil can't figure out what it is.I just put a new motor in my car. Then my turbo took a crap and I changed out the turbo and car is still smoking bad. The car never smoked before the turbo went bad. I am thinking it might be valve guide seals. The turbo I put...
  22. mjboehm

    boost controller question

    I have a question about hooking up my boost controller.Right now I am using a avc-r with a 16g and I know how to hook everything up. I am getting ready to install a to4b-vtrim and a fmic kit on my car and there is no where to hook up the boost controller line that controls the intake side of the...
  23. mjboehm

    what is the difference between 420a head and 4g63 head

    I was wonder what the difference is between the 4g63 turbo head and a 420a n/t head. Any info would be great.Thanks
  24. mjboehm

    to4b-vtrim rebuild

    I have a bullseye to4b-vtrim turbo that needs rebuild. I have a few options I found. First I could just buy a new center cartridge from bullseye for 350.00. Second I can buy a rebuild kit for 80.00 and ship it out to get it balanced for 50.00. Has anyone ever rebuilt this turbo? It doesn't look...
  25. mjboehm

    3rd gen maf

    I was reading that a thrid gen maf out of a v6 gt would work on our car b/c it flowed all most as much air as the evo 8 maf. i have a part number for the maf MD336501 but i am not sure if this is the correct one. Any info on this would be great.Thanks.
  26. mjboehm

    valve guide seals problem

    My car has been burning oil for a while can't figure out where the oil is coming from.I just put a stroker motor in my car it only has 105 miles on it. The car didn't smoke before the turbo went bad.Then my turbo took a crap I tought. So I took off my turbo and replaced it. I cleaned the ic/icp/...
  27. mjboehm

    replaced blown turbo still smoking bad

    I just replaced my 16g in my talon. The seals went bad in my turbo and covered everything in oil. I took everything off and cleaned it with parts cleaner. i put my stock turbo back on my car to break in my motor. After I cleaned everything I replaced the plugs and car runs great but smokes alot...
  28. mjboehm

    what turbo should i get

    i just had my 16g go out. I have a 2.3 liter stroker motor in my car with supporting mods. i wan to produce around 450 to 500hp at the crank and i really don't know what turbo should i look at to buy. i have been told by a few turbo shops that a 20g won't get me there and a 16g is to small to...
  29. mjboehm

    exhaust manifold leak

    i just put a new turbo on my car b/c my other turbo took a crap. i hooked up everthing and i have an exhuast leak coming out of the manifold next to the head. i first had an exhaust leak out of the o2 housing fixed new gasket same as the turbo and bottom of the turbo manidfold. now it is leaking...
  30. mjboehm

    turbo and intercooler question

    i was wondering if i can run a to4b-v trim and a fmic on stock injestors if it ran at stock boost until i buy my injectors. plus i have a stroker motor if that makes any difference. i know running to much boost on stock injectors can lean out a motor. any thoughts would be great
  31. mjboehm

    3rd gen mas in a 1st gen

    does any one know if a 3rd gen mas/maf will work in a 1st gen. any ifo would be great thanks
  32. mjboehm

    loss of power alots of smoke

    I have put a post on here about car smoking blue /gray smoke. the car bottom end have 100 miles on it. the car was running fine till yesterday started it up the car smokes at idle and smokes really bad under boost and the car running rough like it is a misfire. if you give the car gas it has no...
  33. mjboehm

    car smoking new motor/gray /blue smoke

    I just put a 2.3 liter stroker in my car. it has about 100 miles on it.i know new motor rebuilds smoke a little unitl the rings set. when i step on the gas you can see alot of gray smoke comes out of my car. i also have a full 3" exhaust no cat on my car. even when starts up gray smoke comes...
  34. mjboehm

    Lower Control Arms

    I was wondering does anyone know if all lower control arms are the same for the 1st gen. will a n/t fit an awd and so on. any ifo would be great
  35. mjboehm

    2.3 motor build knocking noise

    i just put my 2.3liter stroker in my car this past weekend. the parts i used all new parts:new oil pump manley rods, wiseco pistons,cranks scraper and a reman 2.4 liter crank. the car has 25 miles on it.the noise sounds like it is tapping something in the oil pan and the oil pressure is a little...
  36. mjboehm

    is this a timing problem

    My friend just had a water pump and timing belt done to his car. It is a 93 tsi awd. The car loses power around 4500-5000 rpm's and it also idles between 850-1500 back in forth. does this sound like a timing problem. I haven't had a chance to look at it yet any info on this would be a great help...
  37. mjboehm

    main cap bolt number

    i was wondering does anyone know the part number for the main cap bolts?
  38. mjboehm

    stock main bolts

    i was wondering does anyone know how much hp can the stock main bolts withstand?
  39. mjboehm

    1st gen turbo block vs 1st gen non-turbo block

    I am getting ready to build a 2.3 liter stroker kit. I was wondering if there is a difference between a 6 bolt turbo block and a 6 bolt non-turbo block besides the oil squirters holes. Do the oild squirters make that much of a difference? My setup I am using is: manley rods,wiseco pistons and...
  40. mjboehm

    injector size

    i am getting ready to buy a set of injectors for my 90 tsi awd. the mods i have done are: 2.3 liter 16g walbro 255 avc-r data logger act 2600 clutch & flywheel i am getting ready to buy 2nd gen maf,sacf,fmic,stage 3 keydrive chip. planning on buying a bigger turbo after that 20g or...
  41. mjboehm

    arp main studs

    I just bought arp main studs(207-5401) for my 90 eagle talon tsi awd. i was told that i am going to have to get my block line bored when i installed the arp main studs is this true. i really don't know why i would have to because all i am doing is replacing the bolts with studs and using the...
  42. mjboehm

    gen 2 maf in a gen 1

    do i need a safc to run a gen 2 maf in my 90 tsi awd, i ready a few threads some say i do and others say i don't. i am getting ready to buy 550 and stage 3 keydrive chip any info would be helpful
  43. mjboehm

    2.3 liter stroker kit

    i am building a 2.3 stroker with wiseco pistons 8.8:1, manley rods and 2.4 liter crank i talked to a few people including slowboy racing about the oil squiters. sbr said i can still use my oil squirters and a couple of other people told me that i am going to have to take them out and get the...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top