I was going to bump up an old thread but I decided against it because this is for a different car...same family different platform. :) I'm really hoping you guys can help...haven't gotten much of a response from the 3/s boards...So here is the issue...95 3000GT VR-4...after adjusting other...
So we just started cranking up the boost on my brothers 98 GSX. Its got 6 bolt eagle/wiseco bottom end, Fully ported 2g head with +1mm valves and upgraded valvetrain port matched 1g IM and ported 2g exhaust manifold with HKS 264/272 cams.The setup for the most part consists of:
HX35 w/BEP...
Relevant Information97 Talon TSiFresh 7 bolt Motor with under 10k miles, 180 compression across the board
NEW 2g knock sensor just installed, snug and I teflon taped the threads
NO boost leaks tested up to 20+lbs14b@12lbs of boost
TBE with hi-flo cat
Intake and UICP
Walbro 255 FPI cant...
Hey guys a friend of mine is closing his dealership down and he knew i have ALWAYS BEEN interested in putting a lift in my garage. Well for a short time he is selling his lifts to people he knows until he sells them to a liquidator. I thought maybe I could help someone here that is interested...
Hey guys, alrite before i begin i just want to clarify that i already did a search and i know Proxprt is having a similar probelm as mine but i did not want to hi-jack his thread. i did read it througly to see if that would help my problem but it didntso here i go
91 talon AWDinnovative...
Before anything else is said, I would like to make it clear that I am neutral. I am only posting this because I found it interesting. I dont watch the news and have only limited knowledge of international events. I am on neither side.[Politics]NomieBTW, Im not done watching the whole thing...
hey guys...here is the situation. i took the 91 talon awd(mods with drivetrain..2600 clutch) and launched the car at 5k. this time when i launched it i heard a big BANG coming from the front of the car.the car felt like the e-brake was on and would hardly move. i was not even 2 blocks away from...
I saw this ad on the trader yesterday for a dsmjunkard in Green Bay Wisconsin. Its not there anymore. It was posted on the 10th of June. Anyways, the guy said he had 5 cyclone jdm 6-bolt motors for sale and that he had a junkard in Green Bay Wi, anyone know about this?I need his contact...
Hahaha..Now that I have everyones attention.... I would like to point out some details. Firstly, we did the runs deep into the night, there were no cars in sight on the highway and we had radar detectors to make sure popo's wouldn't bust us. :cool:All races were staged from 45mph...
Just got a quick question. This is for a 90 GS-T with a dp-back exhaust, intake filter and mbc. I have a 2g mas sitting around, can I install the mas w/out any 550's or a fuel controller? ThanksNomie
I currently have the greedy upper and lower hard pipes. I am looking to get the apexi front mount intercooler kit, but the apexi usually does not come with upper intercooler piping. So i was wondering if i could use the upper piping i already have which is the greddy would this work?
I am trying to install the B&M LSD insert and i have the vfaq in front of me. we are tryin to remove the two 36mm nuts and one of them broke loose but the one that is one top is not breaking loose because the top part of that gear is moving but the bottom part is not..is it broken and if so how...
alrite i am having a heck of a hard time chaning my lug nut studs. 3 out of the 5 broke off from the front driver side hub. now i have done this before on a 92 talon and i just had to take the brakes off and hit the studs with a hammer and they popped off..now i have got a 93 talon and when i...
Hey, my friend raced a red 1g possibly GSX yesterday on cicero avenue monday morning. He was telling me about it, and said the dsm had a dsmtuners banner on it, so here I am. Who was it? He wants to know the mods and such. He said they ran up till 110mph on the street and after that my friend...
well i had found a guy that was selling a " 92 AWD tranny". i dont know if its just me but from my memory i know there is an output shaft in the middle of the transmission where the TOB goes and isnt there suppose to be another output shaft for the transfer case? the one i got does not have the...
well the car has ben running good after the new 6-bolt install a couple of months ago. but the last week or i have been driving the car and when i downshift or am in 4th or 5th gear this big howling noise comes. it is espically when i downshift, its loud...not like grinding noise but more of an...
i recently put a 6-bolt in my 92 talon awd. i check my oil everyday because my stupid light keeps comin on when i am at 1-2k rpms. i check it everytime b4 driving and i wondering why it comes on. does it come on when you have more oil than needed...because i have a bit more oil than...
i just purchased an oil pressure gauge and a oil temp gauge. i have installed the senders but is there a vfaq on installing the gauges and wires. i am kidna of confused on the instructions i had gotten. i got 3a racing gauges. any help....thanks
I am trying to remove the inner tie rod. I have taken the bolt off of the outer tie rod and am trying to get the inner tie rod off. This is the driver side inner tie rod. I cant get it to break loose and turn. I tried using PB blaster, everytime i turn the tie rod from the rod,the rod the...
I finally got things going and am looking to purchase the Fp Green turbo. I just have a few questions before I get this turbo. I know its a direct bolt-on but do I need to bend my oil lines or water lines a bit? also is a SS line reccommended? what size intake pipe would i need for this?
I didn't want to write the whole thing over but here is my problem...what do you think it is?http://www.dsmcentral.com/invision/index.php?act=ST&f=1&t=946
i have been trying to get this dangg bolt off and it is giving me hell. i have tired with a breaker bar and a pipe and it wouldnt budge. i tried using a compressor with 90psi and sprayed it down with rust-away and that still wouldnt work. i am thinking of heating it up and than trying with the...
i just bled my clutch system, and changed the clutch. my car has been running fine its just that after a few days, the shifter gets notchy. it doesn't wanna go into gear. now, ive adjusted the master cylinder rod underneath the dash twice, but it just keeps happening again after a few days...
well, i finally got my clutch to disengage. Now my only problem is, from last night when I was driving it, i had to adjust the master cylinder rod twice! the first time, I did it, the clutch finally disengaged. the car was actually then driveable. It would finally go into the gears and not jerk...
aright guys, here is the situation:the car doesn't want to go in gear when its started. no gears, it refuses to go.if I shut the car off, I can put it in gear.If I start the car while it is in gear, the car just starts moving as soon as I crank the motor even though the clutch is...
i recently installed the BM LSD tranny insert and a act 2100 today. the car doesnt go in gear after we started the car. while the car was off it went into gear. we put the car in gear while the car was off and than tried to start the car while in gear the car would jerk forward(of course we had...
i have ordered the chilton book but i want to finish this project by this weekend and the book comes in on monday. i was wondering what are the torque specs for the bolts on that connect the rods to the crankshaft and the transfer case bolts?
i was wondering, wat size honing do i need to get?
i am asking the size of the dingel berry.. i went to Napa and i needed the dingle berry to hone my cylinders...they said they have different sizes
the list was...
Hone Size Minimum working diameter
1. 89mm 83mm
2. 95mm 89mm
3. 105mm...
i am puttin new pistons and piston rings...is it neccasary to hone the cylinders. i am not tooo familar with this. what does honing the cylinders do and do i have to get it done?
we were changing the crankshaft, so we took off the oil pump cover. we were tryin to get the old gasket off, but the old one didn't wanna come off. so were were torching it, almost done, when a little peice about the size of a quarter melted, not all the way through, but just a little dent, so...
i just recieved my crankshaft, i was wondering how difficult it is to install the crankshaft. does anyone have vfaq on it? any details on how to install it? any info will be helpful
btw so far i have the headd off...pistons off. tranny off...
My old crankshaft journals were rough becuse my rod bearings went bad. now i just purchased a new crank shaft. my question is do i just take the old crankshaft off and put this new one on..from what i know i think that is what you do..ne suggestions???
by the way i have my head off and my...
i just bought an act 2600 clutch kit..it was a private person. my friend looked at it and said it is not an act 2600 clutch with a street disc..does anyone have ne pics of one so i can compare them. my friend (knowledgeable person) was sayin that the clutch is not a 2600 but a regular but i...
i just recently purchasd 1g(90) big rods and 95 pistons. i need to buy rod bearings and piston rings. does it matter if i go to a mitsubishi dealer or a plymouth (eagle) dealer to buy the rod bearings and rings? or should i know specifically from what car the rods and pistons came from?
i got my transmission off and my clutch off but my flywheel does not seem to budge. i have one bolt off and the other bolts dont move...i used a rachet and even put a pole on the rachet but it still doesnt budge. what did someof you guys use to take the flywheel off...ne suggestions of what i...
i just bought an act 2600 clutch kit with the throw out bearing..alot of people told me not to use the act throw out bearing cuz it harms the tranny..then should i get a new stock throw out bearing?
i was workin on a big project...and and i took my pistons out but before i did that the bearings in cylinder 1 was really messed up,messed up as in it came out in pieces, now i checked the crankshaft and that was fine. after doing so i took off the rest of the bearings and they seemed burned but...
my mods are in sig, cat is on the car, and the dump is off the car. the car now has a s-afc and mkiv smic. my HC's hydrocarbons are sky high. the c0's are ok, but the HC's have caused me to fail the test some 6-7 times. what can i do to lower the hc's?? btw, hc's is unburnt gas, what are the...
well i have been workin on gettin my head off to get to my pistons because i had 2 mechanic's look at my car and the first one said i might have rod knock or my rod bearing is messed up. i had the other look at it, and he said i have rod knock or my head is messed up. so i opened my head up and...
hey guys, i recently changed my knock sensor, like in november. now today, my logger is showin me code 31 knock sensor. is it bad? i know its kind of a stupid question, but i just changed it, and my car has been having knock problems for a while. thankscould it have gone bad this early? last...
im changin the clutch on my 92 awd, i am usin the procedure on vfaq.com, is there ne thing i should look for, nething that will be hard or difficult? i heard the axel removal part is prob the most difficult part
also is there a specific height i should get the fly wheel cut for a act 2600, i...