Hey did you ever find out what the issue was? I am having the exact same issue and i have all new mounts, new trans, and new clutch. I jacked the car up to see if there was anything hitting anything, but that was before Someone suggested to check the Rear diff bushings. Just curious if you...
I wasn't gonna post since mine car is a 2Gb but since most of them are 2Gb anyway here is mine.<img src="http://www.dsmtuners.com/gallery/files/7/3/5/8/1/parkinglotsideangle.jpg" alt="Parkinglotsideangle" />
<img src="http://www.dsmtuners.com/gallery/files/7/3/5/8/1/parkinglotside.jpg"...
I am not 100% sure if it will work on 97-99. Mine is a 95 and i was able to run the whole harness around the front and under the driver side frame rail. My buddy has a 97 GSX and he had a few wires that connected from the fusebox to the factory harness on the pass side fender... so i can't...
Very Efficient WG setup lol... NO Boost Creep haha:hellyeah:Its a Tial 44, its a custom made exhaust manifold, by having it go straight off the runners it makes for a very efficient setup, do not have to worry about boost creep
mine is just under my Catch Can, best part is i didnt even have to cut or modify the harness, just had to extend my reverse light connector and my Rad fan connector
<img src="http://www.dsmtuners.com/gallery/files/7/3/5/8/1/img_0251.jpg" alt="Tuck Engine 2" />
<img...
KYB AGX Front and Rear
Eibach Proline Front and Rear
235/45/17
Thinking about switching to Sportlines to get a lower stance (although with this setup, i never rub, or scrape)
<img src="http://www.dsmtuners.com/gallery/files/7/3/5/8/1/parkinglotside.jpg" alt="Parkinglotside" />
<img...
SHES ALIVE! Thanks guys for all your help!It ended up being the ignition wire i was spliced into. It lost power during cranking, once i changed wires it started right up!
haha its funny you say that, my buddy just suggested the same thing, i am going to double check tonight, i will let you know. I think that is the problem (I hope) i will let you know.Thanks!
Hey Keri I am pretty sure I have it wired right but I will call Chucky, thanks! :)Giovani... If you could do me a favor and ask Enzo to get back to me when you see him this week... I have called texted and e mailed himIf you could even call me while you are there that would be awesome...
I am running an Autronic SMC and Autronic 500R CDI with Suzuki GSX-R Coils. 6-bolt motor with black top CAS and 95-96 CAS harness. When wired up correctly the CDI completely bypasses the stock igniter and coilsI have searched everywhere possible including the actual Autronic Forums, but most...
Damn! almost made it, last yr i didn't make it but this yr i made the cover! Thanks for using my photo, i hope next yr you consider my car for one of the monthsthanks chris!
Hey Chris, i just sent some photos in. I noticed in your e mail today that you were requesting some clean engine bay shots. I am not sure when your deadline is but i will be finishing up my engine bay this week. I did a pretty decent wire tuck (i will be posting in posting a how to soon) and a...
I think personally if any lip is going to be painted it should only be done on a high offset wheel with a large lip, otherwise just go with a strip or don't do it at all. Car looks good as is.
do it! i have seen plenty here at the shootout like that, and they look sick! but as someone mentioned above, it is hard to maintain a satin paint job....especially black
if you know the name of the rims you want, best thing is type it into google or bing and click on the shopping link at the top, usually finds the lowest price.... enough digging around will find you the best deal
Yeh, not to sound like a broken record man, but i think you should def look into some better mods instead of wasting money on that. back in the day i had a shit knob that had the shift pattern and numbers lit up, it was cool to me at the time, but the wire kept getting caught on the linkage and...
i have a 95 gsx with a 6 bolt, all 2gs have an ignitor, my car used to misfire randomly when it got hot, all it was is the connector to the ignitor was not connected properly, just check if the connector is broken, i used a zip tie on mine and the car ran fine.
you could just buy a nice set of e bay seats...there is a knock off of every popular seat out there. I am sure you can find one to suit your needs. for $300 a pair you really cant go wrong. If all else fails you put your gun in the center console.... I am from New Jersey... this topic does not...
Are you sure that's where the leak is coming from. Those flaps point down, how would water come in if it is flowing from the top to the bottom. I have never seen one leak.
I had the same issue, i had a cracked overflow tank and the car would leak a little coolant at a time while driving on the highway, so bit by bit it would get hotter while driving on the highway. Check if your overflow tank is cracked. If you find nothing wrong then you need to do a leak down...
If anybody can help you it would be Gixxerdrew
He did a lot of landspeed stuff, and now he does road race, his car is nuts with lots of custom aero stuffDSM Forums - View Profile: gixxerdrew
it is def a good idea, black and white are great contrast. I wouldnt suggest the spray vinyl except for the pieces that where not available in black( seat belts, trunk pieces, underdash piece) otherwise you can usually find black dash and center consoe in any 97-99 with tan interiors, and all...
Agreed, i have 17x7.5 +40 offset on 235,45,17 and i rub when taking turns too hard, no fender mod... Stay tuned what did you use to roll the rear fenders? baseball bat method or actual fender rolling tool?
my hood was full of scratches, if you get a very fine sand paper,(1600,1800,2000,2200) and wet sand it with a foam block, then buff it with some compound it makes the carbon look brand new. It was a completely different hood by the time i was done.
This is just a personal opinion, but i would go ahead and just replace them all, bearings don't cost that much and could save you a lot of headaches in the long run
there is no need to get the 74 xHP3 bulbs... super bright led makes direct replacement LED bulbs for the gauge cluster. You wont have to worry about polarity or anything, you just replace the stock bulbsProduct Listing - CAR10th bulb down is the stock replacement bulb
T1.5 Instrument...
Car looks sick bro! i was just curious if you think the evo seats were worth doing or should i just buy some other racing seats? My main concern is sitting a little lower in the car.
It was the Cometic HP... 2 of my friends had it before me, and they both blew the gasket. Both cars were strokers and one of then had a GT35R and the other had a GT40
About the rad hose, i wish i had something that would work better,but AN fittings are way too expensive and the only way i can really do anything about it is if i cut the thermostat housing weld it at a different angle and get some mandrel bends to make a solid rad hose with the couplers. This...
The car could easily make more power, it would make about 10-15 hp per degree of timing, but i have a discontinued Cometic head gasket that i already know is gonna fail, so we kept it a safe tune( head gasket actually went last night).... i'm only about $1500 from really bringing it to life...
hahah yeh i know man... like i said it was a 4 yr build and i just wanted to get it on the road... im saving for a JM Fab SMIM... and for the rad hose its pretty much the only thing that works with that exhaust manifold... the car only gets hot when im sitting in traffic and recently i got the...