I've installed gauges before but after purchasing the Glowshift gauges, I noticed that these come with a lot more wires. Any help on finding where to tap these wires on the car?Mainly the Orange, Yellow, and Red?

Anyone know where this pigtail plug connects to? Its the one with two green wires. Its from the engine harness behind the intake manifold. There are 3 plugs in that same area...one connects to the knock sensor, one connects behind the intake manifold, and the third I forgot.

I've heard that running 1050cc or higher injectors requires an injector (resistor) box, is that true?I plan on getting some FIC 1050cc or I might just stick to 950cc

I used my datalogger to see what CEL my car has. It said "12 MAFS"The car is mostly stock besides an exhaust and FMIC.Wondering if this means the plug or the sensor itself? When I got the car, the plug's wiring was cut...so I got a used plug and 1g stock maf sensor off a junked car. I...

I put together this 90 talon tsi from scratch but when I went to turn it on, it only stays on for a few seconds and it turns off. Car is stock except for an exhaust and FMIC. Here is a quick video.Any ideas?1G DSM Talon startup problem - YouTube

So I tried to fire up the car for the first time right now and after a few unsuccessful attempts I noticed that the gauge on the afpr does not move at all when cranking the car. Im assuming its not normal, so I'm thinking the afpr doesn't work??Any ideas?Car came with a no brand afpr...

I picked up a 90 AWD talon with 2g GSX rims (17x6.5) and wanted to toughen up the stance of the car a little. Not looking to buy new rims right now. I need new tires though so I was wondering if any of you have these rims and what is the biggest tires I can run on these. It currently has...

I am putting together a 90 talon awd from scratch and cannot remember what goes attached to the connector right under the battery terminal fuses, the square connector is only a few inches long. Anyone know?Also on the alternator wiring, there are 5 wires: 2 for the alternator (power...

I bought a 90 talon awd recently with no rear axles. I purchased used axles, but when I went to install, the passenger one went in without problems (clicked right in). However the driver's side is becoming a pain, I've tried and tried but had no luck to snap it in place.I was wondering if...

I am replacing random suspension parts on my 90 awd talon. As I removed the 2 bolts that hold the front struts to the lower assembly, I noticed that the bolts were not oem, rather some hardware junk replacements which bent and warped. I have been trying to find the OEM ones online with no...

Wondering if anyone has any experience with local shops in the LA area that can rebuild a stock 4g63t engine and if you have, how much you paid.I wanna rebuild my motor to stock for, nothing aftermarket, so any suggestions would be appreciated.PS. I live like 10 min away from RRE in...

shopping for a 1g awd running or not...if its running, I prefer something close to stock. heavy modified cars are not what i am looking for.

Anyone in socal have a 1g awd shell/rolling chassis hit me up. or 1g awd for sale will also interest me. 5spd only.

Ok so I took my dam talon out for a spin and everything was going ok until I got to a red light and when I went to press the brakes, the damn brakes were so hard to push in (just like the car is turned off, they get really stiff)...however my car is still on and running. It takes all my leg...

ok so today I was going to fix my meth injection so I took out the UICP from my car and I decided to unbolt the shifter cables as well (don't know why I did this) maybe for more room or something...anyways I fixed my meth injection and I put everything back together but suddenly my shifter was...

Has anyone else had their driveshaft come apart from the rear differential??? My car has always vibrated while cruising in the freeway at about 75-80mph...since the day I bought it...never thought much of it...2 years later, my driveshaft and rear differential came apart...The 4 bolts holding...

hey do any of you have any ideas on what I can check ### when i get over 50mph the car starts vibrating a lot and it gets really annoying and loud...any little tricks to make it stop???

after installing a set of used lowering springs and new kyb shocks, my car's suspension has been acting weird lately. The suspension was fine at first but now everytime I am driving and hit a little dip on the road, the suspension on the front of the car makes a loud "thump" sound. Even if I...

I am going to go to the track this wednesday if everything goes well. I have my car running on 91 oct and meth injection (HEET) with a M15 nozzle. My afr's are at about 11.5-11.7 with no knock. Car runs fine. I want to run higher octane gas at the track possibly 118oct...My question is will...

I have 2 issues now with the Talon. First off, I installed a 93 TB on my 90 talon (only difference was the TPS) I cut the wires and spliced them correctly. Then, to avoid coolant leaks, I simply used a hose to connect both water lines on the bottom of the throttle body together, eliminating...

Ok so I was reading this thread: http://dsmtuners.com/forums/showthread.php?t=119890&highlight=map+sensorI went to the junk yard and since I didn't remember the #s on the map sensor, I decided to get all the ones I could find. <a href="http://photobucket.com/" target="_blank"><img...

I finally got my talon up and running today after finding out that a certain company forgot to tighten one of the cam gears on my engine and was the reason why my car wasn't turning on....Anyways....I let it warm up, check the fluids, and the hit the roads to break it in...I gotta say that I was...

for a while now I have been trying to find a boost leak that I have somewhere by the throttle body. I did a boost leak and I felt like the leak was around the green coil where the throttle cable attaches to. I took off the throttle body but I can't see where it could be leaking from. swapped...

i have tried and tried but couldn't find it....my CEL came on and I checked with my datalogger and it said: 43. What the heck is code 43...This is on my 1g talon.

Just wondering if these spark plugs look alright...They are BPR7ES which I just took off the car after 1300 break in miles.<a href="http://photobucket.com/" target="_blank"><img src="http://i8.photobucket.com/albums/a39/tavo_80816/plugs1.jpg" border="0" alt="Photobucket - Video and Image...

First off I barely got the DSMLink on Tuesday and have not received my username and password for the DSMlink forums.I am having connection problems because when I open the DSMlink program on my laptop is always says "Timed Out failure" (something like that). I am using the Belkin USB to DB9...

So I am deciding on getting rid of my water injection and going straight to methanol...unfortunately I can't find any methanol in my city...I tried looking for some at home depot, ace, and OSH but the only thing I could find that contained methanol was a liquid called "denatured alcohol." I...

Hey guys, after all the troubles with my engine and the blood,sweat, and tears...I managed to get everything done and drove my car 175miles north to Sacramento for CMI (North vs South) Event.I am currently running a stock 14b turbo (GT30R will be installed after 1000 miles on the engine) so...

does anyone know where the 2 water lines on the bottom of the TB go to??? anyone got any pics, makes it easier. also there is a steel line that goes straight back from the main front water pipe and there is a smaller line that sticks up, right next to the side of the intake manifold, where...

I just finished the 2nd day of building my talon for the last time.I'm almost done, should be done by the weekend for sure...then the breakin, after 500 miles, the gt30 will be bolted on and then after a total of 1000 engine miles, the car will be strapped on the dyno....updates on the build...

Just looking at this makes me all tingly inside...only 3 more days can't wait...hopefully I am good to go Oct 29 - CMI @ Sacramento, CA.

I relocated the battery to the trunk and went to the track but they didn't let me run because I didn't have the kill switch installed yet. I did a quick search and found this thread: http://www.dsmtuners.com/forums/showthread.php?t=234924&highlight=nhraOk the question I have is this: Since...

Ok here's the deal....I read this thread http://www.dsmtuners.com/forums/showthread.php?t=233421me and my buddy are close to getting our cars out finally...he's running a BR stage 2 with gt35r and all the supporting mods and I am running a Stage 2 SBR motor with a gt30r and all the goodies...

my instructions are lost and this is how I remember the install...please let me know if this is correct as I am not the best when it comes to electrical stuff.

Ok so I got my battery relocation kit and I am following the instructions to install the battery in the trunk from this website: http://www.geocities.com/dan0myte/mods/battery.htmlI went to my local auto store to buy a circuit breaker but cannot find a 140A circuit breaker like the one that...

hey do any of you guys know where i can buy an afc harness? I got a good deal on an afc on ebay but it does not come with the harness...i checked out SBR, RRE, and google and can't find anything. anyone know where i can find one or if i can install the afc without the harness? thanks