I'm trying to help a friend here with a galant that I'm doing some work for.
I should have taken pictures but unfortuneatly I'm an idiot and didn't. I'm trying to keep from pulling the valve cover back off. The cams are very clean and bright in color. No paint marks. Just 2...
LAST AUTO X OF THE SEASON !!!!! COME OUT AND HAVE FUN AND DRESS WARM!!!who: Tri County corvette club sponsored autocross. OPEN TO THE PUBLIC AND ANY SAFE VEHICLE EXCEPT TRUCKS AND BIKES!when: THIS SUNDAY THE 20 from 9am till ? This a run till you drop format.where: PP&L electtic...
who: Tri County corvette club sponsored autocross. OPEN TO THE PUBLIC AND ANY SAFE VEHICLE EXCEPT TRUCKS AND BIKES!when: THIS SATURDAY THE 22 from 9am till ? This a run till you drop format.
where: PP&L electtic utlilities parking lot. Tannersville PA, Tannersville exit on rt 80...
As title states. Run till you drop with the Tri County Corvette Club Autocross event. This is a sanctioned LEGAL event on Sunday september 25th. (OPEN TO THE PUBLIC! FREE TO SPECTATORS! PASSENGERS ARE ALLOWED!)This is a small FUN COURSE!!!! speeds are no more then 40mph. 2 lap track format...
Just starting a thread for the 2011 englishtown dsm/evo, wrx/sti shootout. Looking to see who will be attending and try and get a decent turnout. I know in previous years this show does not get the same crowd as the ohio dsm evo shootout but its still a good time.Saturday, October 15th...
11/21/10 (sunday) (tomorrow)the tri county corvette club is hosting the last autocross event for the season at the pp&l electric company parking lot in tannserville pennsylvania. Evewnt starts at 10am but u may want to come a little earlier to set up or hang out. It is open to all cars with...
11/21/10 (sunday) (tomorrow)the tri county corvette club is hosting the last autocross event for the season at the pp&l electric company parking lot in tannserville pennsylvania. Evewnt starts at 10am but u may want to come a little earlier to set up or hang out. It is open to all cars...
FIXED!!!!!! BAD Isc. Electronically is test ok but it is mechanically bad. Adjustment was wrong and even though the coils are ok it wont pull or push the isc full travel. I thought it was working before but after watching the video on youtube of a working isc it does not work as it should...
my 22nd birthday party is this weekend and was extending the invite to the local dsm community in the tristate area. There will be some alcohol and burgers and dogs on a grill. If you would like to stay overnight i do have some space and some tents set up in my backyard. Please bring...
I'm trying to avoid buying a brand new tps sensor at the moment so here is my issue. I have a 90 tsi awd that Im getting ready to finish the build on however i swapped to a non turbo throttle body. I need to swap tps sensors to make this happen. The tps sensor i have is a 4 pin tps...
purchased a tubular manifold that has 2 small cracks in the lower section of the pipes by the base of the flange for the turbo to bolt to. I can see the cracks from inside the piping and from outside however it is next to impossible to fit the welder in between the pipes to fix the crack so I...
Recently recieved my Magnus SMIM "street core" in the mail for my 6 bolt holset 35 build and just wanted to supply some info on the part. It is not installed yet however the quality is amazing and the welds are beautiful. I had it flanged for a stock dsm throttle body. There was a slight mix up...
I recieved a Megan racing 3 inch exhaust as a gift but no downpipe. I Do have a 3 inch downpipe that came with my car however it does not have a flange on the end of it as it was cut and sleeved to fit a barely 2 1/2inch exhaust that was less then stellar when i got the car. I'm...
As of the first of the year this car is no longer for sale as My fiance has now decided to keep the car and have me rebuild it. Sorry for any inconvience
THESE PARTS MUST GO!!!!!!!!!!! IF you would like you can make an offer to TAKE EVERYTHING!!!!!!!!!!!!!!! I NEED THIS STUFF GONE!!!!!!!Various 1g parts for sale. they are all taking up space in my garage and my basement and need to go. If you don't like my price please make me offer and...
Dog box stage1 rebuild for fiances 2g tsi awd so far is awesome. Customer service is second to none. We were able to drop off the trans after business hours and they waited for us to pick it up a week later after hours as well. Chris from Dogbox was extremely quick to call back and let me...
Used the kit on my fiances 96 tsi just over the weekend and it made assembly very simple with the cam holder and tensioner tool. If you are doing a water pump I found that using a vise to compress the hydraulic tensioner was still easier until the tensioner is bolted back down. Once the...
DSMtuners License Plate Frame > Calendars, Hats, Misc. > DSMtuners StoreThis is the first I saw this and fell in love with it, However I have noticed that some license plate frames from say walmart or other stores don't quite seem to fit into a 1g license plate area.
Has anyone bought this...
EVERY FRIDAY NIGHT from may through october the monroe coutnry cruisers put on a classic car show in the dairyqueen parking lot that is open to all cars. (MOSTLY OLDIES) however anyone can show up and pop the hood. They have 50/50 ticket drawings, raffles and offer a trophy every week. There...
Thursday nights spring summer and fall at the lowes parking lot in bartonsville just off of rt 80 and minutes from rt33. This is usually a gathering of volkswagens however IT IS OPEN TO EVERYONE!!! just show up and hang out. some nights there will be 5-6 cars and others there are 20. rain or...
Finally, after three years of owning my FWD and always wanting an AWD and aquiring enough spare parts I just picked it up for $1400. The body is rough but the car runs and drives with just over 100k on the clock and the only performance mod is a turboback exhaust and it came with new tires...
Today while searching through the junkyard I found a flat nosed mitsubishi panel side van with the motor under the seats. It is a gas motor and the emissions tag does state its a 2.4 liter and the valve cover looks to be somewhat close to a Starion/Conquest. The van has relatively low mielage...
Other then Appearence and some differences in wiring for the pop up headlights is there any sort of drivetrain differences such as splines on transfer case or anything drivetrain related other then the 3 bolt rear. I have a 92 tsi FWD and I'm finally getting ready to purchase another dsm (91...
I'm in quite a perdicament at the moment with turbo selection for a 2.3 stroker. I need to keep it stock appearing and keep cost down. I also want to keep it a mitsu flanged turbo and internally gated. Street manners are also in mind. This will be daily driven so reliability is also a factor...
When I was at the englishtown New Jersey mitsu vs subie day I found a t-shirt that had a picture of jesus holding a turbo, It was being sold by one of the vendors and unfortuneatley I don't remember the vendors name so I can't find the t-shirt. Anyways, anyone with any help locating this shirt...
Just posting positive feedback on taylor 10.4mm race wires. Very crisp solid connections on coil pack and plugs. Wires were cut to fit out of the box and there was very little exces leaving for a very clean look. These wires may pose an issue for re-mounted coil packs but if kept in the same...
I was with a friend of mine today and he mentioned to me a place what he believed was called Mosers auto parts or auto salvage in Freenland pa that was littered with dsms. What really got my attention was an AWD 1g shell that he said was going for $300 and it wasn't in bad shape. HAs anyone...
I have the option to trade my 14b turbo with an unknown amount of mileage with very extremely limited play for a non turbo 6 bolt block, head and intake. I would be upgrading to a evo3 16g and would be building this non turbo block to a turbo set up. other then oil squirters and pistons what...
last night in moosic i was at cinemark and noticed a gvr-4 in the parking light sparkling under the lights and fell in love. Im a sucker for what started the evo. lol. anyway it was a gray color with 5 spoke rims and a twin tip exhaust. the vr4 lettering on the back was faded and on the...
I just wanna start by saying this is not my car so im going to give as much info as possible. he just purchased a 92 tsi awd with meth, link, 16g running 26psi, 750cc injectors, walbro 255 rewired, afpr, thermal exhaust, gm 3bar sensor.Hallman in car manual boost controller. meth is hooked up to...
just wanted to give an update on the car with some problems I had that I now fixed that will probably help out more then one person.
After installing my 3kvr4 fuel pump I had to adjust safc settings to ver 20+% when the stock pump was only at 13-15% and the car had an extremely long...
Just wanted to post about the previous weekends event at Maplegrove for the Universal technical institutes high school challenge. Met up with quite a few people from the forums driving some sweet dsms and just wanted to say thanks for the help and support that was given and recieved. I'm...
Took the car to the track the other day and noticed that boost kept climbing past 20 with my 14b even with the mbc set to 15-16psi. I continued to turn down mbc and boost still went to 20+, I then removed mbc and ran direct wastegate from j-pipe. Boost held steady at 10psi for about half track...
My check engine light came on other day during drive to work in pouring rain and large puddles but went out about 15 minutes later, no noticeable change in performance and nothing weird with anything else. I work for a shop so I hooked up the snap on scanner and scanned for codes, code 31...
Sorry if this is in the wrong category so sorry if it gets moved, I did a search but couldn't really find the exact answer. Does anyone know wether or not I could get a factory reprint of the window sticker that would give price, fuel mileage, etc. I have the original owners manual,and...
Does anyone know of any online companies like extreme psi or slowboy that would sell harness adapters already made for a 2g maf in a 1g car. i did have a maf plug but lost it and i don't have time to go to a salvage yard and don't trust ebay or classifieds for that matter.:talon:
I just recieved a pressure plate from a friend at a local automotive shop that he said would just need a slight resaurface and was told it was a heavy duty pressure plate. The part number on the pressure plate is 0021457. The plate also says made in usa and it looks like it has a manufacture...
So i looked around on the threads and couldn't quite find an answer. I've read up on the whole 2g maf into a 1g and have no problems performing the actual install however my question lies within the 2g maf. I've noticed on mitsu cars and trucks built after 94 they seem to use a very similar maf...
im slightly new to dsms with my 92 talon tsi... its mostly stock at the moment with a sbr head air filter and mbc (17psi depending on weather) (stock turbo) i've been researching the possible upgrades and i was thinking if i can come across everything i might do this to it but i wanna...