Hi,
Removed my self made 3.5 inch stainless exhaust and noticed that the flex piece have became destroyed internally. Is this normal after a while or have I just been unlucky? Strange thing is that It did a 9.64 the last time I drove the car...
Hi, Have an used Evo 3 1.gear gear set for sale. 12/33. Both input shaft with gear and the other gear. I only have one picture as I havent separated all the gears yet. MD747888 and MD743979. The splines on the clutch input are a little twisted, but works just fine. I ran with a QM twin 7.25". I...
Hi,
I saw that FP are soon going to release a Black and/or Zero with 10cm ex.housing. Anyone here knows what a 2900-3000 lb (1350kg) auto car are capable of at the 1/4 mile on E85 only?
Thanks
Hi,
When running 1/4 mile, (9.64 and auto) there is coming alot of oil from the valve cover filling my catch can. No problems running 1/8 mile. I would love to have a Magnus dry sump kit, but it is very expensive and need an external oil can, which I wont have in my engine bay...
Have been...
Hi,
What is the correct location of the notch/groove? Should the bushing be installed as far in as possible in the pump housing, or just at the outer edge?
Thanks
Hi,
I have converted my Evo 2 to an auto using w4a33 gearbox. Have installed shift kit, Kiggly front clutch and Precision industries converter. Have driven it some miles, everthing OK and took it on the dyno to dial boost and check my tune since it was years ago I tuned it. Had some pulls and...
Hi,
W4A33 speed sensor wiring. I have the sensor, but without connector... I cant find any pin # on the sensor, but one of the pins are gold plated. Is the gold plated pin +12v or speed signal?
Thanks
Hi,
I dont drive my car very much, mainly just street legal/drag events. Normally I change the oil and filter after the season, (running E85) but I didnt do it last as I had used the car very little. I ran with it some events and thought I would pull the bearings to check and was surpriced how...
Hi,
I am looking for some good cold grip pads to hold at the line when launching with auto. Have read that Brakeman #93 works very well. Who sells these?
Thanks
Just the diff itself, not gears.
Reason I ask is that I have a 2G LSD auto rear diff for sale (diff only, no gears), and I got asked if it will fit a 1G.
Thanks
I just checked the viscous for some atf fluids, and the regular Hy-Gard have about 9 cst@100 degrees celsious. Redline Racing Lightweight 4.9 cst@100 degrees celsius.
Say it have a flash stall @3000 rpm with Hy-Gard (cst 9), how much higher flash stall with Redline Lightweight (cst 4.9)?
Anyone...
Just designed and 3D-printed a housing for my ForcedFour Smart 100.1 shiftbox display. Really happy with it. Took a piece of clear lexan and applied dark sun film on it so the display only shows when powered up. Pictures of it in my Lancer Evo 2 Auto project.Hi,
Hi,
I have starting wiring the ForcedFour shiftbox on my Evo 2 W4A33 Auto project and would like to measure converter slip as well. This is my first Auto experience, so this is unknown for me. I suppose the difference from engine speed vs input speed from pulse generator "A" is converter slip...
Hi,
I am going to get my center diff welded and would like to try doing it myself. I have read splines must be perfect aligned to avoid wobbling. Do you guys make a jig before welding, or how do you do it?
There are no shops in my country that are doing these cars, and I dont want to spend alot...
Hi,
I have installed Kigglys 6-friction front clutch pack (50% more TQ) and regarding the oem spec for the W4A33, it should be 0,8-1,0 mm. Mine is a tight 0,8 mm... Will it be fine or should I aim for a 0,9 mm? Didnt receive any info in the clutchpack kit regarding clearance, so I suppose I...
Hi,
I am rebuilding the oilpump and watched John@IPT in his video saying the oil seal for the drive gear in oil pump is not needed. Anyone knows why?Thanks
Hi,
I bought a second hand W4A33 auto gearbox and are upgrading it with Kiggly clutches and Translab HP shift kit. I have removed valve body and seperated it. Cleaned all with brakes cleaner. Had no problems removing valves, unless the shift Control valve (# 13 in Picture below) in the upper...