Hey guys my buddy has a 1g awd tranny with the bellhousing has about a 8 inch crack in it. I need to find a shop that can aluminum weld decent enough to weld this bellhousing up! If anyone knows anyone that can aluminum weld good please let me know ASAP!!Matt,

Hey guys i have a 95 eagle talon with the 420a non turbo automatic transmission that needs rebuild anybody know of anyone or a good shop that knows what there doing with these eclipse transmissions ????If so please give me a text or call on my cell at 480-430-4340 mattNeed this...

Hey guys just like title states I have a 95 eagle talon esi with 420a motor im in desperate need of a automatic transmission. If anyone knows were i can get one or have one they wanna sell please call or text me anytimematt, 480-430-4340

Hey guys i just purchased a really clean 2g 95 talon esi car has the 420a motor with a auto trans. Cars in great condition i purchased it for only 750 bucks. I bought this car as a decent little daily driver for work and back since it has AC.anyways i purchased car knowing theres somthing...

Hey guys like title shows im in the process of swaping my 1g 6 bolt motor into my new 2g. Im lookin for a 2g awd trans, passenger side motor driver side motor mount, the 2g block motor mount. 2g awd starter, alternator,non cruise control throttle cable. Also would like to get rid of all the ABS...

Hey guys ive been having this sputter problems around 6g rpm range were car feels kinda like fuel cut. I cant really tell if its from running to lean or not. when you guys look at the logs you will see what im talkin about by the rpms. Can you guys please look over these logs and see what you...

hey guys im in proccess of building a 2g gsx and couple use couple parts. lookin for95 eprom ecu non cruise controll cable non abs lines and porpotion valve. cam gear side motor mount passenger side frame motor mount 97-99 front and rear bumperlet me know if u have any of...

Anybody know whats needed to remove the ABS brake stuff on a 2g gsx?? Is it like the 1g awd were all u need is the non abs porportion valve and different front brake lines??I wanna get rid of the 2g abs brake lines and module located in driver side fender area.

what sidemount intercooler is this?? Doesnt look like a factory 2g sidemount.

Hey guys Anybody have a decent 6 bolt AWD clutch for sale? also lookin for a 6 bolt starter.

Hey guys when i start motor cold it doesnt wanna stay running at all. I have to give car little gas intell motor warms up then car idles just fine on its own. Mods are in profile. Running dsmlink v3. Im pretty sure cars running to rich. Im fairly new to link so not sure how to mess with the...

Hey guys i started noticeing a weird clicking noise in my rear driver side axle area while turning. I do have a welded center diff so trying to turn going slow is kinda a pain.I only here this strange clicking noise as im turning only.Anyone have any ideas what this issue could be...

Like title says guys im helpin a buddy build his built 420a motor. Hes running eagle rods with je pistons. We need help finding the torque specs for his eagle rods arp bolts. The bolts say arp 2000 on them.Can anyone help us find the torque specs for a chrysler 420s eagle rod arp bolts?

Does anyone here local know how to tune dsmlink?? Im on a fresh built motor and dont wanna mess my motor up with bad idle afr. IF anyones willing to lend me a hand on how to show me just a little basics of tuning with dsmlink that would be sweet!! ;)

OK guys first off please bare with me im new to the tuning game. I just recently baught dsmlink v3 and running speed density since i was running dsmap/jackel before. The last couple months my cars been down due to previous motor threw a rod bearing. So this time i spend a good decent amount of...

Hey guys i just got my new motor all installed and im running a 90 OFH. Does anyone have a oil cooler they would like to sell???

Hey guys i have a buddys car thats a 1.8 93 eclipse. Anytime the motors cold the motor will start but idles really bad around 500 to 600 rpms for the first 10 sec or so. What would all cause this?? after idle for 10 sec or so motor idles perfect.

Need help guys. Im workin on a 93 1.8 4g37 eclipse. Car doesnt have much power at all and doesnt run right. Come to find out while the car is running i pulled each injector clips off 1 at a time. Sure enough cylinder 2 when i pull the injector clip motor didnt try and die out as it should. What...

Hey guys i just Purchased dsmlink v3 :hellyeah:. I have been tuning before with jackel/dsmap running speed density. In your guys opinion should i stick with speed density with dsmlink or run a 2g mass??matt,

Hey guys im selling my LC-1 wideband its still like brand new had it installed in my motor for most 50 miles then motor threw a rod bearing. comes with the red afr gauge also.Still have box and paperwork with it.Askin 160 obomatt call or text anytime. 480-430-4340

Hey guys i did some research and wasnt able to find much info. Im lookin for a bep housing for my big H1C turbo. Seems like everyone has stopped makin these for these holset turbos. Any help would be great!:thumb:

If Anyone wants to trade me my New lc-1 wideband with red gauge for a AEM wideband let me know.matt 480-430-4340

Ok guys i got a fully built crower head from a local dsm guy. The heads a full out built crower with crower titanium retainers,Bronze guides, crower springs, and i believe crower valves. The head has been used so i wanted to remove all the valves and make sure there all seated correctly and...

Hey guys i have a 94 eclipse that im parting out. the cars pretty much a complete car just the guy who i got the car from lost title when he came down here from cali.If anyone needs any 1g parts from this car just feel to text me anytimecar does have the nicer cleaner lookin 2g gsx gst...

Hey guys im in need of a 2g alternator. I believe mine has takin a shit. If anyone has one laying around they would like to sell hit me up please.Matt 480-430-4340

Hey guys ive been haveing this weird knocking/clacking noise coming from my 7 bolt motor. I was thinking it was the lifters but then i just changed all the lifters out with the 3g type and motors still making the noise. I tried the knock method of removing 1 spark plug wire at a time on each...

Hey guys im having a issue with my battery keeps draining. So i took my brand new battery and alternator down to autozone and they tested both and they both turn out to be good. I had them test the alternator 4 times lol and all 3 little test on the mechine passed all 4 times.So now my...

Hey guys for the past few weekends ive been in the process of prepping out my 2g 95 gsx for paint. I purchased the car off a buddy of mine for only 800 bucks. I think the car came out pretty decent and just thought i would share with you guys on how it came out. The paint code and color is...

Hey guys anyone out there have a 2g hoods laying around they wanna sell?? Text or call if so .Im in the process of painting my 2g and have a hood but not in that good of condition. So anyhelp wound be great :hellyeah: matt 480-430-4340

Hey i got a buddy that bought a 95 awd tsi. Car runs like crap really bad. Started doing some test on it and found out that cylinders 2 3 4 injectors are not firing up. The car has a 6 bolt swap in it. What could be causing this issue. Could be that 3 of the 4 stock 450cc injectors not firing up...

Hey guys i wanna buy these set of pistons and rods off this guy but i just wanna make sure there 20.over and for a 6 bolt motor.Heres the specspart number for pistons is 3420301Arias forged pistons ( 3.366 bore, 1.375 ch, .827 pin)rods are .....Eagle rodsEagle Rods (5900...

Hey guys i have dsmlink v2.5 for sale for a 1g, Im takin offers i maybe willing to trade other car parts for 1g or 2g .matt 480-430-4340

Hey guys im selling my 98 gst spyder eclipse. Car is in decent condition and motor runs good! Only reason im selling it is cause i just picked up a 95 gsx so i no longer need the 98 gst since i owen 4 dsm cars now :D.Askin 2500oboIf interested or need more info call or text me anytime...

Hey guys im really not to sure what this noise is thats coming from my bottem end (7 bolt) Im new to the whole crankwalk stuff. At first i thought it might have been a balance shaft bearing but then last night i took off all the belts to access the balance shaft belt area and noticed theres no...

Hey guys i have a buddy of mine that has this cams installed in his car. The car sounds no were near like my 1g gsx with 272's. His car has a pretty decient lope in it so were thinkin his car has a set of aftermarket cams.... Anyone know witch cams these are?

Hey guys my 95 gsx i bought has been running extremely rich since i recently bought it so im assuming its due to the aftermarket walbro 255 fuel pump with the stock FRP. Does anyone have a stock 2g gsx fuel pump i can try and to see if its my issue??? If so ill trade my aftermarket walbro 255...

Hey guys i just purchased a 95 gsx. Previous owner said that he had bought a brand new motor and car doesnt have that many miles on it. Well when i bought the car it he told me the motor was smoking a bit due to a bad turbo he said. Well i put on a known good 14b turbo and fired car up and...

Hey guys i need to know witch turbo this is and if its a ebay or a real type..heres few pics

Hey guys im getting ready to install a 2g AWD trans in a buddys 1g awd. Now i have never done this before. Is there any tips on what all needs to be done to get the job done....?Thanks for the help guys.hfy

Hey guys like title says im lookin for a 2g turbo model AC fan. I have lots of 1g fans but dont believe they will work!Dam ac fan blades are melting with this AZ heat!Call or text me if anyone has one they would sell to help out a fallow dsmer:hellyeah:matt 480-430-4340

Hey guys im lookin for a 2g ac condenser for my 98 gs-t! If anyone has one they will sell shoot me a text or callmatt 480-430-4340

Hey guys ive been fighting with my timing on my 2g for a while now. I have tried SO many times to get all the marks to line up perfect and they just wont line up. Now im no nobbie when it comes to this i have timed alot of these motors but this one for some reason is kickin my ass.I lined...

Hey guys im workin on my 2g 98 gst. IF anyone could please help me out im in a need of a cam sensor. If anyone has one they will sell please let me know i need one by this weekend if possible.Text me if anyone has one they wanna sellmatt, 480-430-4340Got what i needed thanks to a...

Hey guys i just bought a 98 gst for my wife. I towed the gst home cause it was really far drive from my house. Well got home and took it for a spin around the block and and noticed a slight knocking or tapping sound around 3k or higher. The higher rpms i go the faster the knocking or tapping...

Hey guys i have searched but havent found much luck. Im looking for a walbro 255 stock replacement fuel filter anyone knows a vendor or place that sells them? Im getting ready to fab up my dual intake walbro fuel pumps :hellyeah: Along with my new 1200cc injectors i just oredered today!

Hey guys i got a 1g 1.8 car for free but doesnt run for some reason. I checked to make sure it was getting fuel to the fuel rail and it does. I checked to make sure its getting spark and it is. So i figured i would do a cold compression test and all 4 cylinders had around 100psi cold. So the...

Like the title above says im lookin for someone in the mesa or phx area thats running the dsmap AKA jackel tunning software. Im having issues with mine and need help you can find more out about it hereDS-MAP.NET • View topic - Weird problems after ds-map install.If you are i am in...

Hey guys i went to prime my motor tonight to start it up and for some reason when i go to start it all it does is some wierd click noise at the starter and i noticed the WDO relay clicks. What could be causing this a bad ground or what?? Please help want to get this thing started:hellyeah:

Hey guys im in the process of installing a single pole-single throw relay for my 14inch slim fan but cant seem to figure out how to wire this relay up with a toggle switch! Can anyone help i have been searching for hours now on how to wire this thing up!

Hey guess im in the process of trying to route my driverside intecooler piping and it looks like its gonna be a pain in the ass. Does any one have any pics they can post up of how they routed there driverside piping.This is on a 91 AWD chassis with a huge ebay interccooler that messures to...