Have another set of cluster 1-4 Shafts + gears + selectors + Forks + hub + syncro + rails, all the things you need for your DSM transmission to be made to a Evo3 gear set Price is 1300 shipped to you via UPS Priority Express

EVO 3 Tall ratio for 5th gear 0.617 = 21/34 tooth for sale Includes gears + syncros + Forks + hub It will fit 2G DSM and Late 1G AWD transmissions. Price is $550 shipped via Priority Express, Paypal is accepted.

This is a Cusco MZ front diff or Cusco RS, , will fit the Evo123, 1g and the 2g or Vr4 front diff without any issue, pretty much drop it in. They are 1way lock with 100% locking arrangements. Price is $750 each Paypald, shipped to you by Priority Express. Reviews on me at...

I have 2 more pieced of S90 Throttlebody 70mm Revision 3 , I do not have any 74mm in hands currently. These are $190 shipped to your door step by Priority.

Cusco MZ front diff, fits all AWD DSM transmission. It is plated mechanical diff by Cusco Japan. It sells for over 1300+ by TMZ, i am letting this go for only $750 shipped to your door including paypal fees and shipped by Priority.

Invoice sent sir, I will get the items ready, will send you details pictures and video of the gears in a better quality

1. Fifth gear 0.617 Evo3 pair $550 shipped with the Hub Slider and Sychros.2.Evo 3 Cluster of Input + Output Gear 1,2,3,4 + Shift Rails + Forks + Hub + Sliders Ratio 2.750, 1.684, 1.160, 0.862 $1300 shipped to your door step including paypal fees

Front and rear lockers, LSD Cusco RS 1way. Will fit DSM Awd / Evo 1-3. Both plate wears aren't tht much, still locks as it supposed to. USD720 shipped per piece. If bought together USD1350 shipped together.

Genuine S90 Super90 Throttle body for Evo 1-3 / DSM . This is the new version that comes with a bigger shaft This new design will overcome the issue of broken shafts and also issue of leak whistle sound. It has a about 3mm thicker shaft this time around as you may see in the pics, Price is $219...

1. Fifth gear 0.617 Evo3 pair $450 shipped if you need the Hub Slider and Sychros then it would be $100 additional2.Evo 3 Cluster of Input + Output Gear 1,2,3,4 + Shift Rails + Forks + Hub + Sliders Ratio 2.750, 1.684, 1.160, 0.862 $1100 shipped to your door step including paypal fees3. Evo...

I have a rear diff that can replace the rear diff of your DSM It is clutch packed , mechanical diff , it comes together with Evo3 Inner cups. Price is $480 shipped to you by UPS Expres including the inner cups.

Hi Guys, I have a rare piece , a HKS T4 DSM Manifold , never been mounted since I bought them It is definately genuine, it is the darker unit in this pictures, the one that has the mounts for headshield. I am looking at $600 shipped to your doorstep. Price includes paypal fees and shipping fee...

Kaaz LSD Rear for Evo1-3, Evo4-9rs. Very good condition, pics of plates can be given to those that are serious. Price is USD 499 / £410 shipped to you per piece. Www.wasap.my/60123960518

Genuine S90 Super90 Throttle body for Evo 1-3 / DSM This is the new version that comes with a bigger shaft This new design will overcome the issue of broken shafts It has a 3-4mm thicker shaft this time around as you may see in the pics, Price is 130GBP / USD190 / AUD284 / NZD300 shipped to...

Garrett has seem to have changed their compressor covers casting to Honeywell in Japan, just informing you guys.Source : Fatboy Racing Malaysia : Turbo Six

yes it is possible buy you need to machine the compressor housing to make it fit

i beliee its a tc06 old skool housing Turbos

anyone else in dsmtuners doing similar setups ?

some eye candy for you guys.Turbo Six

Hello guys,Wiseco has come up with a new range pistons http://www.wiseco.com/Catalogs/SportCompact/MiniMitsu.pdfThe new series which is called Asymmetric Skirt design is new design piston but it is listed under the evo4-9 section. We used to believe that Evo4-9 pistons works for us...

from wht i have known the mitsubishi .63 by PTE is very small most probably u just gonna choke tht little housing with a 6262 , if its a 5558 maybe it would be more suitable

y do u guys for the $399 FP30/35 which require more work into it while u can get a FP31 which is only priced at $199 ?

I have tested my 6blade 56mm billet with a 7blade 60mm hx40 , for some weird reasons im getting higher power on the dyno , on dyno dynamics im getting 354whp at 21psi , the 7blade was making 310whp.

the HX35 is a 60/70mm wheel the T31 is a 56.5/64mm wheelso you do need an experience machinist to do it. I am from Asia, so I can source it out for you guys.

here you godnt take the FP30 housing, FP offers another housing called the FP30 Style housing for a Stage III Garrett T series turbo , u just need to machine them for about 2mm and u r done , the GT series housing will cause much much more fabricationswarning, the HX40 wheel will not...

I finally dyno'd my car , the previous setup is in dotted linesOld setup FP Green with 7cm housing 1G stock block Stock 1G intake manifold MMLS 1.2mm 1G head with FP2 cams Boost 32psi , 93 Octane fuelNew setup HX35 billet + FP30 turbine housing Kelford 272 , TX version Boost...

In your opinion, what do you think would be an ideal build for a Time Attack 4G63 car2.4 Long Rod 100mm crank Wiseco HD pistons MAP's 156mm rodsor would you go lighter with H-Beam K1 light weight rods Mahle or other lighter pistons or maybe even lower CCThe turbo I am...

Hi guys ,I would like your opions for a suitable engine for Circuit track, I am not gonna go high on HP , below are the stuff I do have in hand but I would just like your opinions on it.4G64 Block Wiseco HD 10.5:1 CR , 86.5 Stock bore stroker pistons , short skirts 100mm crank OEM...

I gave him 24hrs to refund me the money, i sent him a PM and Facebook msg, lets wait 24hrs, then proceed. Feels "arghhhhhhh, urghhh" , dammmm

its 3 days passed , so he hasnt shipped it yet , so in total today is the 10th day he doesnt reply PM's hmm , what should I do now ?he comes online again today, active in Private Messaging, comes to FB, updates his status, but wont reply in either FB or DSMtuners, is it time ?

Yeah, gift is what we call suicidal lol We have two more days to wait for

these days Facebook has become your identification card lol even my niece 9 yr old has one :D

thank dude, today marks the 7th day and he has PM'd me saying he doesnt have transportation to the post office, he wants 2 more days, hmm, i'll wait i guess.He wanted the money sent using "Gift" , thank god i dint do that.

Hm.. He finally replied a PM on the 6th day saying he doesnt have internet and he did not ship it yet cos he couldnt come online to read my address.

Wokie, we will wait n see :) hopefully it turns out good

Hi there guys, would like to have opinion from you guysI bought something through a DSMTuners member over here. He informed me that the items are ready to go and he has reserved it for me. He passed me his paypal ID.I made the transaction 4 days ago and today is the fifth day. He did come...

Thts evo III original head

nop, the evo III is same as the 2g's

Thanks guys, i put them side by side with my Howards, looks like they have a 3/8" threads

Hi there guys , I would need your help guys , I do have a set of Groden rods 6 bolt without the ARP bolts, i bought it from a dsm'er Any groden owners here who could give me the dimension of the boltsthis my rodAs we do know Groden's site is pointing to somewhere else , maybe they...

isnt the part numbers the same , ermm

erm GTX3576 would jst be a 35 turbine wheel with a 76mm exducer compressor wheel err , i dnt tink this turbo would favour the dsmers , DSM'ers prefer GTX3082 or GTX3582 instead

bringing this topic back to livedo u guys think for a 2.2L destroke + HX35 .70 turbine housing will suit a S1 or S2 , bare in mind its a track time attack car n not a drag car :)

Huhuhu, let me show u my side of the picture One is on .70 FP housing and one more is on .82 Garrett T3 divided the stainless steel FP will of cos look smaller because it has a thin wall

so far i see very different results compared to Asian :) i will post up the results soon. Lets say 7 days

The last page where u r asked to fill in email, tht part is not needed to be filled, cheers.

updated

Hello guys , I am doing a survey about the turbo charging industry in various countries I am comparing the inputs of US forums compared to the Asian forums for my study/research.Could you guys fill up the survey for me Turbo Survey (US)This is not a spam guys. Thank you in advance The last...

i faced the same kind of issue on a green, i doubt the mvs is flowing enuff

its normal , the Japanese currency has grown stronger thant he US currency, exchange rate effects japanese product pricing