I guess the right thing to do here is to start with a back story.I was sitting at work (Mitsubishi parts) and recieved a phone call from a kind old lady; she says that she wrecked the front of her car and doesn't want to see it go to the junkyard. I told the lady that I would gladly come take...

I am trying to get my 1g awd transmission back into my car, clutch is in and everything, I will buy a case of beer or a sandwich for anyone that is feeling generous today. I am, unfortunately, doing this on jack stands in my driveway.Call or text me at 410-925-7701.Car is back together...

Who here is going to the college park meet on Sunday? I will certianly try and show.College Park Tuning :: The Official Car Club of the University of Maryland for more info.

I am tired of sifting through hundreds of OE alarm disable threads. I know defiant (I think)thinks you can just yank a fuse and be done with it, well not in the case of my 95 talon. I have pulled every fuse in the top row of the kick panel and to no avail. I will figure this out on my own as...

I finally got my Talon running on all 4 cyl, after buying her with a broken timing belt, and 16 bent valves. Mitsu MLS headgasket, OEM timing belt, water pump, new pullys new gaskets and seals, BSE and more that I can't remember. She also had a little facelift, and I think for the money she...

So...Two weeks ago I picked up a 1995 Eagle Talon TSi FWD for $600. Towed her home and started the job. I established the fact that it has a 6-bolt installed. I put all new mitsubishi parts on the timing side to no avail. She spins freely with only one cyl. seeming to fire. I am going to...

I have been in the 300zx world since I got rid of my 95 GSX. Before that I had a 98 420A-T.I picked up a new project car yesterday, a 1995 Eagle Talon TSI FWD. I think it has a hacked 6 bolt in there, but the timing belt tensioner decided to stop working on the previous owner. I am...

I work at a Mitsu dealer as some of you may know. I would have no problem giving people part numbers to help identify specific parts, I can give list prices (my specific dealership, and we go by MMNA MSRP) and if I can figure out this damn catalog I can send you diagrams.For more specific...

That is the question. I am trying to sell my GSX but I just KNOW I will want it back. I bought another eclipse b/c I was sad for parting out my RS-T. It needs a trans and a heater core. I have a DD now (learned my lesson) but I just can't decide whether or not to keep it. The car is really...

I saw one other thread concerning this and I have been all over google, ebay, and supporting vendor's websites.I have a 2g GSX and would love to know my options. I think TEIN is a name that I would have to pay for and there are equal/better options out there. I was thinking Ksport but I...

Lets get this thread goin for all of the folks goin to Cecil County Dragway.Once I get situated I will be up there most friday/saturday nights....after classes end in may Wednesdays will be in the picture too.

I am going to be back into the DSM world. I found the car that I am going to buy, either today or tomorrow. It is the OEM orange paint. GSX. Hopefully the 4g63 will treat me better than the 420A.

My friend went to look at a decent '95 GST today. The guy said the car didn't start. We checked the oil and antifreeze and they were dry. The guy said that he shut it off while sitting in traffic due to overheating, I decided that sounds like a headgasket. I would also belive that the...

I know that the RS does not have a swaybar.Are there predrilled holes for swaybars and can I just bolt-on the front and rear swaybars from a GS-T?I hate asking questions that seem so common, but belive it or not. I didn't see it in the two pages presented from many searches.

I was on the 300zx forums for a while and some guy did this with my car...Think we can do it for my beautiful 420A-T?

I found a transmission and purchased it because the company guaranteed that it is in perfect working condition. They also provided documentation that the transmission had 71k miles on it.The transmission is also marked "Viscious LSD." I was under the impression that Viscious did not make...

If you have a Portfueler setup and recieve a bogging or leaning out at -1inHg or about that area, you might be wondering why. You probably tried to contact HRC tech and they never answer. You also might be tempted to tune the portfueler to engauge earlier instead of at 0PSI.If you are...

Did everyone die? Last post on this forum was two days ago. I started hanging out in the Tri-State forum so that I can talk to people....Let me know if anyone in MD still exists.:toobad:

I will be heading up to Cecil County on wednesday for the "Test & Tune" that they have going on. It is very similar to Street Grudge.I will hopefully represent the 420A's in a good way.:cool:

My first two runs ever, not just on the DSM....1st run: R/T ... .075 60' ... 3.566 330 ... 7.764 1/8 ... 11.021 MPH ... 76.37 1000 ... 13.765 1/4 ... 16.103 MPH ... 98.982nd run: R/T ... -.011 60' ... 2.773 330 ... 6.873 1/8 ... 10.097 MPH ... 76.01 1000 ... 12.859 1/4 ...

As we all know, the portfueler takes up one more vacuum source than other turbo conversions setups.On the stock IM we have 3 vacuum ports on the back and one located on the TB (this one goes to power steering IIRC).I am going to test out different combinations to see what is best to...

Sorry Paul, I didn't see where to post this properly. I bought a 300zx and did a motor swap and just finished the project. My friend forced me to take the Eclipse to the drag way tonight and I ran a 15.2 at 98 mph with a HORRIBLE launch. I have revived the Eclipse and am now looking into...

I have decided to go with a Turbonetics T3/T4 turbo from www.treadstoneperformance.com, I love their warantee and I want to get a standard bearing for the $813. I am asking for opinions as to what turbo I should take to make for the best and most reliable for my setup. Yes, that is right I...

I have everything wired correctly and done up perfectly, when I go WOT my car revs to 4.5k and jolts and the boost gauge reads just over 10lbs on a 15lb spring. I think it is fuel cut but I have never felt fuel cut. My autometer gauge is reading lean at WOT. I will be calling Hahn's tomorrow...

Okay, I got all of my engine in and the turbo installed. I have a t3/t4 57 trim turbo with the hahns portfueler fuel setup. I have a custom 3" downpipe with a tsudo N1 exhaust. Everything is wired correctly but it still seems like it is running like piss, minus the fact that it idles at 3.5k...

I have the Hahns Portfueler, the instructions that I got second hand did not tell me where to wire the actual module to. We tried tapping into the crank sensor logically thinking that it had a ground a power and had an RPM reading, well the car didn't turn over like that at all. We...

This may sound like an off the wall question, but, just how many of what types of bends do I need for intercooler piping, and where do I find them. I have my whole engine in and the intercooler piping that came with my kit was COMPLETELY wrong. I have no U bends and not enough couplers. This...

I am looking to get the LSD insert from http://www.amcparts.net/ and I was wondering if anyone had any horror or heavenly stories...I am using a SBC clutch the OFE SS stage 3

Where can I get an after market crankshaft, if I need one? I plan to run 16-20psi but the machine shop said that it was an aluminum crank in a steel block, and that it most likely won't support over 15psi.

Head studs or Main studs, what is the difference?I also can't find any other places to buy ARP products for the 420A, the only site I have found is www.howellautomotive.com. Can someone point me in the right direction? I am getting a full bottom end rebuild with forged internals for my...

i found a friend with this kit for a 420A, first this is what it comes with: CI motorsports turbo manifold T3/T4 57 trim turbo Tial waste gate with 8psi spring Tial Blow Off Valve JDM 24x8x3 Intercooler Complete Intercooler piping New oil pan, pre tapped with 10an oil return...

Hi im new...i cant find it in the search...but i drive a 1998 mistubishi RS its a DOHC 2.0L...what type of engine is it and where would i look on a dsm...im an old time honda fanatic...dsm is new to me...thanks for any replies