where is the best place i could get carbon fiber cloth?

it shows tps voltage at .24 and throttle pos all the way on the bottom.....Guys please help me?!?!?!?!!??!

I have dsm link , not sure how to use it 100%.... any help? No i did not mess around with datalogger.....

I did a boost leak test , it seems fine....I messed around with TPS , and now it idles 1500-2000 !!! A LITTLE BETTER !!!! IM GETTING SOMWHERE BUT PLEASE HELP!!!

Anyone in the Area could help me? 60561 DARIEN IL~!?!!?!? SAVE ME PLEASE!!!!! :pray:

no it keeps doing that all the time.....good condition .... i checked, damn i know its something stupid and easy that i cant figure out....... :)Tried that.... :(

The car is being used only on weekends , its driven 5000-7000 miles in past 2 years..... I put it together and i dont believe it would need cleaning.... Which one is ICV???

Car suddenly started to Idle like crazy 2000-2500 dropping and coming up again..... I changed ISC , tried multiple TPS , throttle cable is not stuck , idle screw is all the way in..... HELP~!~~~~~ Forgot to mention (ITS PULLS HARD AND NORMAL)!!!!!

Nobody helped me out there , so im back here again , ok i gapped plugs to .025 or .026 and now it misfires MUCH less!!! so what is the prob?

Does your pump gas contain up to 10% ethanol?

I got one from mitsubishiparts.com , i called the guy and did an order thru the phone ! it cost me onlt 67 bucks plus shipping!!!!

Ok and is everyone ready for this? Dealer wants $128 bucks ... :ohdamn:

Thats exactly why i f hate the dealer and never buy anything from them , maybe some bolts lol :D and those are like $2 some bucks a piece :banghead: idk i will call dealer tomorrow morning and try to figure something out...... ExtremePsi or you guys know more favorites that sell OEM stuff?

dealer is my only choice , but damn its gonna be expensive . I called about a middle timing belt cover for my 98gst , dealer said $66 special order..... i got it from ExtremePsi for 46 with "handling fee" and free shipping.... Dealer wants extra $20 for what??? :confused:

yeah i know but the thing is that i have a local drag race this sunday ,and there is no way i can get it by then.... maybe a dealer ...... any other options ? and i dont want to pay much for shipping.... :cool:

hey everyone i have a quick question about the tensioner , my engine has around 5000 miles on it , and when i took the timing belt off to do the valve stem seals , the tensioner was a little wet inside .... Today i went and put it in a vice and compressed it , it did leak a little oil out (and...

I had glowshift gauges ( Boost , oil pressure ) for 4 years now , they work perfectly!

I just placed an order , with "free shipping lol" and $7.50 Handling fee , it came out to 46 bucks or something , well we will see how it goes! THanks!

i know that they are different but the pic seems the same.... and tried calling them , i cant reach them @269-226-4463 , is this the right number? Extreme charges 7.50 handling fee??? what is it?

i got this DSM Graveyard - Your #1 Source for DSM Parts! but the part numbers are different , now im confused......

Guys can you help me out to find a 2g 98gst Middle timing belt cover , my local dealer wants $68 , tooo much . Please help.....

Ok my story is that i had my car tuned at AMS , it ran fine for 2 days , at that time i had COP ignition. Then after couple of days car started misfiring at high rpms , but it was rarely not all the time . Then after some time i went to a parts store and got 4 brand new 300m coils, and it did...

ebay mufflers are no good , piping on the other hand is fine , cheap piping and get a nice muffler , trust me the Ebay ones are loud and annoying...... I had one , ricer sound...... Now i got Greddy V-spec , its quiet , rumbles :D :hellyeah:

Seriously man , those are 2 different cars . 1g and 2g are nothing the same considering body parts. If you manage to get them in there Please let us all see it . Good Luck :hellyeah:

full boost i get 2mpg :D

did you try leaving the key out of the ignition for a while?

For the head as follows ,arp's all around including studs,mls hg, bc272 cams , springs ,retainers , port , polish , 1mm oversized valves , new valveguides , seals basically everything.

Lol the car isnt that great :D I know your right , im not argueing about t-stat. FTW haha Have a nice day man , you just made mine :D Ill order a t-stat ASAP , and where do i order seals agai?

it was tuned on DSMlink (ECMlink now they call it :D) at 20 psi i made 320to the wheels. no thermostat.....

i know , was planing to get 160 thermostat in the future :) My car always hated heat , with stock engine and this a new one too :) Well thats not my biggest concern right now , where is the best place to get valve stem seals?

because the car was running above normal with the thermostat i had. Now just have to figure out where to get the seals from and the spring tool!!

This engine was done last season , it was in my garage for the whole winter.... Im not sure what he checked , but i think when you are biulding an engine everything should be done properly.... It was fine for almost 2000 miles and now it cracked? the car never overheated , i dont even have a...

Ok make long story short :) I got this brand new fully built engine 4000-6000 miles ago , big16 turbo(for break in) , portwork(polish) on the head oversized valves ,cams , etc . je pistons , scat rods ,arps all around , well just too much to list :) When the first time i put the engine in the...

it does not misfire all the time , please read my responses. .025 at 21lbs

very interersting issue. The wires are not melting anymore. Now i noticed when i warm up the car and get out n the street and WOT it does not backfire , but when i get to my gym about 15-20 minutes if i floor it backfires again , so i dont think its wires , it may be coils?!?!? If it was wires...

they are brp7 and they are gapped properly , we did that while on the dyno(way back).

Hi guys ill begin my story from the start so there would be no confusion. I got all the parts needed to biuld my own COP setup , ordered a thick aluminum plate from Jayracing. I soldered every connection possible and wired everything as it supposed to be. I had the car run fine , but it wasnt...

My log , idk but the car does not pull properly at all. Its all messed up , i do have a really small boost leak on the TB spring. But i dont think thats it , backfires like a mofo. And also how do i setup the fans so they would turn on earlyer than stock. The car overheats until i crank up...

x4 for steve! :thumb:

Thanks , i have it running , DSMlink

How about COP?

How to with COP?

HOw about COP setup?

How about COP setup?

What if i have COP setup?

It has been tortured , get the person who did it and show him to me

Because the motor and the trans are together and in car, well ill have to pull it out anyways... no other way to do it....

Hey everyone , i personally do not have any opinions about putting teflon tape on flywheel bots. My friend didnt have anything like lock tite or some other stuff usually used on bolts , so he decided to put teflon tape around them. I was wondering what could happen , anything bad or nothing...

i cant get in there to measure it ..... , i went and hooked up my car battery , it turns the engine , so i think its the right flywheel . I grabed some speaker wires to test that lol , melted in my hands :)

how big is the difference between AWD and FWD? Idk , its kind of hard to measure anything inside there. Can you tell me what dimensions are they ? i saw on the flywheel mits1 6255 but its not a part number.