So I went to the track the other day and only managed a best of 14.6@94. This was launching off of the 2 step at 4500 rpm and spiking boost at about 22psi. I am completely confused as to what is going on. I ran a 14.3 at 93mph in my old eclipse (avatar pic) on a stock bottom end with a 14b...
Just wanted to see if anyone was planning on heading to the Steel Valley Supernationals this year. I go nearly every year and I feel like I'm always the only DSM there!. It is $35 for a weekend pass and you get unlimited runs down the track. The weather is supposed to be beautiful this weekend...
Hey guys, there is a car club called Gripped Ohio and they meet up at a Sonic on Snow Rd. in Parma/Cleveland are on Wednesday nights. One of my friends run it and I'm planning on heading up there tonight from Akron if anyone would like to join
Hey guys I'm a newbie to tuning and ecmlink so I just have a few questions to ask.I have Ecmlink v3 installed and am running Delphi 680's,a GM MAF with a direct cable for link..I have the global set right right for my injectors,airflowperrev sitting around .25-.26 at idle with COMBFT sitting...
Ok Guys.I'm finishing up a full rebuild (wiseco/eagle) and plan on starting her up tomorrow.I packed the oil pump with grease when putting it together.For the first start up, should I unplug the MPI relay and the coil and crank the motor some to get the oil pressure up before I start the car?Is...
OK guys,just a quick question.I bought a shell that I am putting together.It has prothane motor mounts but was missing the one motor mount that hooks to the top of the motor right underneath the cam gears.So I am on prothane's site trying to figure out which one of these inserts goes into this...
Hey guys,I need a little help with finding the part number for the castle plug that goes into the oil pump case.I tried removing it from my old oil pump but couldn't get it out before it broke.I circled where it goes in the pic with a red circle.Any help would be greatly appreciated.Thanks
Richie
So I'm working on my bottom end today and installing the balance shaft elimination bearings.Yes I have read the vfaq.I know that I have to replace the bearings (2) on the front shaft and turn them so that they block the oiling hole.What about the other shaft that only has one bearing with no...
This is for all you 1g guys running the FP 4" intake.I'm building a 93' TSI right now,and it will be running an evo3 16g.I noticed that FP now makes a reducer coupler so that their 4" intake can be run with a 16g style turbo.Is anyone running a similar setup or this intake on a 1g?If so, are...
Well after bleeding and re-bleeding my clutch,I found out that the clutch pedal assembly is worn out and will not allow me to push the master cylinder in enough to engage the clutch....The Lever is worn out and I plan on welding it...What is the best way to weld it?Just a bead around the nut...