The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support STM Tuned

Search results for query: *

  1. WILOWNU

    Evo 3 16g compressor wheel

    yeah i dont want to chance it with the pieces missing. While its off the car, i want to repair it. Its not the shaft, its just the compressor wheel on the ebay auction.
  2. WILOWNU

    Evo 3 16g compressor wheel

    Well i got a evo3 16g from a buddy that has compressor wheel damage and i have been trying to find a replacement. I know Forced Performance sells them, but i cant stomach paying 180 bucks for one, when i just got a MHI small 16g wheel last year for 60.......I found this one on EbayTurbo...
  3. WILOWNU

    Component balanced turbo?Evo316g

    I am getting a evo316g off a friend that has some compressor wheel damage for 75 bucks. He told me that i can simply buy a new wheel, rebuild it and will not have to get it balanced? He said it was component balanced. I did search and seen some posts........but i have never heard of it. If its a...
  4. WILOWNU

    oil cooler concerns with 6 bolt swap

    stock setup is great as long as it doesnt leak anywhere... that is the only reason I would upgrade.
  5. WILOWNU

    extreme turbo lag

    yes A small diameter hose runs from the intake manifold to the blow off valve. When the pressure in the intake manifold is positive (in boost), the pressure in the small hose keeps the wastegate closed.Once you let off of the gas, the throttle plate closes, and all of the air in the intake...
  6. WILOWNU

    Metal in oil.......Advise Please...PICS

    mmmm thats tasty. gotta love DSM's
  7. WILOWNU

    30r 1000cc's dsmlink anyone use this setup?

    ive made a few logs, posted them on ecm and got some good feedback, I just wanted to cross reference with a few other ppl...thanks for the log! keep them coming.
  8. WILOWNU

    30r 1000cc's dsmlink anyone use this setup?

    indeed every setup is different. I was just hoping if someone had some stuff we could cross reference.
  9. WILOWNU

    30r 1000cc's dsmlink anyone use this setup?

    trying to get a base setup on my link. I have the injector cycle at -55.1% and 345 deadtime. I have the timing flat across the board. using a 2g maf and stock cams, I was wondering if anyone else has this setup and can post a log so I can see how they have it programmed. I appreciate it guys!
  10. WILOWNU

    '90 front mount oil cooler

    i bought an aluminum cooler core for 40 bucks on ebay, got the lines 2 2ft -8 lines for 12 bucks on ebay, and then ordered my fittings from summit. all in all....less than 80 bucks for everything.
  11. WILOWNU

    stalls and bucks when I go to move

    worked on the car some more earlier, mas is plugged in.....its just odd...it idles great! and if i put it in reverse it doesnt want to stall out...as bad, i mean i can get it rolling and give it some throttle, but i try ANY forward gear and as soon as i let out on the clutch and give it a blip...
  12. WILOWNU

    stalls and bucks when I go to move

    thought I had it fixed, but it is doing the same thing.... again.... idles perfectly, and will run in reverse...but as soon as I go to move forward...it wants to stall out...any GOOD ideas?
  13. WILOWNU

    are dsm's amarican cars?

    they must have owned a honda before...or hang out with honda kids.
  14. WILOWNU

    stalls and bucks when I go to move

    fluctuated from 10.9 to 16.6 around in there....but..... i did a few things today, one of which seems to have solved the issue... i hope. I opened up the link and retarded the timing globally....2 degrees. I re-wired my engine coolant temp sensor for the ecu and I unplugged my battery to...
  15. WILOWNU

    stalls and bucks when I go to move

    it doesnt die when i put it in gear........it dies when i let out on the clutch to make the car move while it is in gear....
  16. WILOWNU

    stalls and bucks when I go to move

    global is set at -55% with a deadtime of 345, my sliders in the link are 500 rpm -10%, 100rpm -5% and back to 0 at 1500 on up.... wideband is reading around 15:1 on idle. which is rather lean, but the car isnt under load so it shouldnt be a problem...the only issues i could think that would...
  17. WILOWNU

    stalls and bucks when I go to move

    messed around with it today, found a broken wire on my knock sensor...fixed it....didnt help my problem though....any wisemen car to offer your insight?
  18. WILOWNU

    stalls and bucks when I go to move

    did a wet boost leak test....which means i did a complete test on my pipes while they were soaked in soapy water so i could see even the smallest leak.fpr is at 43.5 psi per aeromotive afpr
  19. WILOWNU

    stalls and bucks when I go to move

    timing is dead on, cant find any leaks around the intake. mas is plugged in and worked on a friends car fine, car doesnt smoke....just dies, if i mash it it will puff, but thats because it wide open and only firing once or twice....blah this is driving me nutz
  20. WILOWNU

    stalls and bucks when I go to move

    ok, so I recently did a hg job and timing belt on my car. while it was down I upgraded to 1000cc injectors and 2gv2 dsmlink. car idles great, but as soon as I go to move it (ie. have it in gear and let off the clutch) it dies....if i mash the throttle when I let off of the clutch it bucks like a...
  21. WILOWNU

    whine, then clunk, now hard to move

    ended up actually being a problem in the t-case.. got a new one swapped in and no problems as of yet....
  22. WILOWNU

    o2 issues, wiring?

    Ok, having some issues with my front o2 sensor.... in my logs its reading that the front o2 is getting 1.* volts and up to 3.* volts at some points. ill post the log... Ive looked at the wiring for the sensor and i have on the engine side a red, blk/ylw, black, and a white wire.... after some...
  23. WILOWNU

    which o2 sensor to use?

    I have a six bolt swap in my 95, im using dsmlink to tune with, and on my logs my front o2 is showing values of up to 1.6 volts. so I am going to replace it. the question is, do I use a 2g o2 sensor or a 1g o2 sensor? also where is a good place to purchase these, since many people have had...
  24. WILOWNU

    whine, then clunk, now hard to move

    drained the oil today, had a few small shavings. flushed it with some cheap coastal, and then put some more cheap coastal in it to see if it ran better...which it did. took it around the block no problem. still having a leak tho. which i believe is the pinion seal, is there a black cover that...
  25. WILOWNU

    whine, then clunk, now hard to move

    I bought a early 92 awd with the 6/4 combo a week ago, and drove it home (500ish miles) and it ran like a champ. When I parked it I noticed it was leaking some fluid from the rear end, which it was not when I inspected it prior to purchasing. I was thinking maybe a seal was bad or whatever. I...
  26. WILOWNU

    Front wheel drive limits

    I made 410 hp on my old set up and I was fine with my fwd, granted I had no traction if I tried to launch at a drag strip, but I didnt build my car to take to the drag strip, I built mine to shut up all the v8 assholes that cruise up and down the highway in my area.Its all about what you...
  27. WILOWNU

    Porting a turbo

    when I did my DIY porting on my 30r I used a carbide porting bit from lowes. Ibelieve it was around 20 bucks. and I used a wire wheel to smooth it out after. just make sure you dont over do it. port a little. smooth a little.
  28. WILOWNU

    [RESOLVED] no compression cyl3. valves?

    im just gonna take the head off of it tomorrow and send it back to the machine shop to have the valves checked.ended up being 4 bent intake valves in the 2 and 3 cyl....
  29. WILOWNU

    [RESOLVED] no compression cyl3. valves?

    pistons were perfect when I had it tore apart...but then again the valves looked good too. the surfaces were decked before I put an OEM hg with copper gasket spray on it, and arp's torqued to 80 ft/lb's ....i just need to buy a leakdown tester.
  30. WILOWNU

    [RESOLVED] no compression cyl3. valves?

    but how would a machine shop not see that if they dissassembled/inspected/reassembled the head?
  31. WILOWNU

    tubular mani tap

    lol indeed. but about your original post, if you wish to use the egt probe (which isnt a bad idea, if you plan on boosting a good bit) weld a bung on and tap the bung like the first responder said.
  32. WILOWNU

    [RESOLVED] no compression cyl3. valves?

    just put a new headgasket on my car over the last few week. while the head was off I sent it off to get decked. The machinist took the cams, and valves out to deck it, and then reinstalled them. now before all of this the car ran fine, it just white smoked from water getting in the combustion...
  33. WILOWNU

    tubular mani tap

    luck of the draw, or the amount of abuse that is thrown at it. i personally have an obx manifold which is notorious for cracking, but I have polyurethane motor mounts and have welded in 2 braces on the manifold, 2 years and no cracks whatsoever
  34. WILOWNU

    headlight and interior light fuses keep blowing

    having an issue with my fuses instantly blowing when i put them in. wasnt doing this the other day when I was messing around with my car. since the interior lights and the obd2 port use the same fuse, i know it had to be good since I was connecting to dsmlink the other day. I go out to work on...
  35. WILOWNU

    frankenstein 2gb 2ga headlights

    cover is actually the same length, just has a different front. it sealed up fine.Defiant, I sense some sarcasm, as I do know im not posting a tech on how to make "a car that hasnt ran 12's, run 10's" I believe that this info will help some of those that wish to do a 2ga to 2gb conversion...
  36. WILOWNU

    frankenstein 2gb 2ga headlights

    so I bought a 2gb eclipse bumper to put on my talon, and since have been thinking of what I am going to do about headlights....buy 2gb ones? too much money use 2ga ones? looks like shit use the plastic exterior 2gb pieces that I have lying around (because when I bought my car it came with...
  37. WILOWNU

    [RESOLVED] oil sending unit help

    great, thank ya sir!RESOLVED
  38. WILOWNU

    [RESOLVED] oil sending unit help

    i believe you are correct. does the ecu use either signals? or can I just run a wire to an aftermarket gauge?
  39. WILOWNU

    [RESOLVED] oil sending unit help

  40. WILOWNU

    [RESOLVED] oil sending unit help

    when I bought my 2g it came with a 6 bolt swap.It had a front facing oil cooler on it and the oil sending unit is rather large on this car, also it didnt have a wire going to it when I got to looking around at it. I recently bought a 90 style so I can run an air/oil cooler, It came with a...
  41. WILOWNU

    What cams / cam combo?

    if you are going to beef up the bottom end, and not the top....why bother? Build the stroker, and build a head to suit it. I am a big fan of the bc 280/280 setup, and it works exeptionally well on the 2.3. Get you a decent set of valvesprings that can handle the cams, and be very, very happy...
  42. WILOWNU

    [RESOLVED] oil filter sandwich

  43. WILOWNU

    [RESOLVED] oil filter sandwich

    indeed...thanks guys.
  44. WILOWNU

    [RESOLVED] oil filter sandwich

    been using a front facing oil filter housing on my 6 bolt, it doesnt have the provisions for an external oil cooler and I was thinking of putting in one of those sandwich plates to give me some ports to work with, anyone use these?OIL FILTER SANDWICH ADAPTER EAGLE TALON 1G DSM 90-94 - eBay...
  45. WILOWNU

    delphi 1000cc's good or bad?

    sweet, thanks guys!
  46. WILOWNU

    delphi 1000cc's good or bad?

    I am looking to upgrade my fuel injectors. I am currently running 880's but i am getting a new tune this spring and gonna shoot for higher numbers. As I was browsing the net for a good deal I cam across the delphi low impedance peak and hold 1000cc injectors. Delphi 95lb (1000cc) Low-Impedance...
  47. WILOWNU

    what size an hose is this? will this work for coolant?

    2nd reply is what I was looking for.... Thanks.
  48. WILOWNU

    what size an hose is this? will this work for coolant?

    29 views and no one has an idea as to the sizes??? im leaning toward -6 and -8 but im not sure.
  49. WILOWNU

    what size an hose is this? will this work for coolant?

    looking to us AN line for my coolant to and from my turbo, i have some hose i just dont know exactly what size it is....any help will be appreciated
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top