Closest I got to rice. Had the bigger rims on back, blew a tire and was borrowing a friends tires and my car got stolen, this was the day I got it back. Its what caused me to get into DSM's. Car was violated and I didnt want it any more. After it being broken into twice that year and then...
I've found that if the car overheats at idle, it is usually the water pump going bad. forgive me if I missed it, as I just woke up not long ago but do you see the coolant moving in the water neck when you hit 180* with the coolant? If not, it could mean the pump is no longer doing its job. Do...
If you have the money, you can contact Tuning Technologies and they may be able to fit you in for a tuning session. They are in Colton, off the 10 freeway. As for Alfred.
I daily drive with 35psi, soon to be 40, as long as you keep your foot off the gas, keep it in vac and run the right fuel, you could run 100psi every day and be fine.
If the turbo requires coolant, I say run the coolant. If it doesnt then reroute. Ball bearing requires coolant so you MUST run it. Its your choice to not do it on a journal bearing. Just make sure to turbo time it. I always say, better safe than sorry, coolant when asked for.
Are you shitting me? Its a $70 header and down pipe, how do you think it is? You could practically recycle it and get more than you pay for it.Rule #1 about modding a car.Quality isnt cheap and cheap isnt qualityRule #2 about modding a car.Mod cheap, mod twice. That means, you...
The problem is, the narrowband o2 is about as useful as a screen door on a submarine. The stock o2 sensor is far from accurate, you are honestly better off pulling out the autometer AF gauge and throwing it away, might sound mean but its true. You cant tune by it, you cant get an accurate...
I bought a water to air intercooler a while back but plans have changed and I am dont think I will be using it, I have been trying to find some v8 guys interested in purchasing it but no luck so far, its a big SOB. something like 24X9X7.
Man, too bad you are on the other side of the state, I could help you pull your motor.Take off the hood.Unhook linkage etc and pull the engine out with the trans hooked up, its so much easier that way. Its a 1 person job that way. Put it in the same way, transmission hooked up.
I got everything all hooked up. Only problems I had was a little leak from the block fed plug, which was a bi*** to solve with the turbo in the car, I had to put some JB Weld on there let it dry, fire up the car, warm her up and wait for leaks. I had to go 3 times with JB Weld before I could get...
I just moved to Missouri from Southern California and now I have to deal with Animals bigger than a dog in the roads at dusk. When the sun goes down, so does my MPH. I will drive 50 in a 65, 30 in a 45. Cant risk my car, i will just have to leave early.
I had no problems getting my car smogged in California and they are the strictest state when it comes to testing.Passed everything with flying colors with 272's and the original cat in the car! hehe.
3571r?I thought they came in .63, .82 and 1.06You should be looking at 400-600ish depending on tune and boost levels run, condition of engine, fuel grade etc.It is oil and water cooled.Spool times, depending on engine, 2.4L about 4k, 2.0L about 5k I would say. I am getting 20psi at 4500...
Hehe. I used to work at a auto dismantler so I get great deals there, unfortunately they dont carry DSM's anymore as they are too old.I got a 3" Needswings downpipe, stock exhaust and K&N CIA for a SRT-4 for $200 and then sold them, $200 for the need swings, $100 for the stock exhaust and...
UP until Feb I lived in the IE. Redlands, Highland, Rialto, Colton, Loma Linda, San Bernardino. I know my way around the joint a little, only 33 years living there hehe.Ontario police will pull you over even if you have done nothing wrong. I have seen it plenty of times while at work...
I have RRE, Extreme PSI, Punishment Racing, JNZ etc on Speed dial hehe.No car parts ever go on the credit cards unless they are emergency repairs.$2,000 in the bank right now and I have been unemployed snce January. Just purchased a gt3582r for the GSX too hehe.
I've only ever seen these knock off turbos fail. I had a friend who purchased one, it failed in a couple months so he went and purchased another one, it never did boost right at all. It was a failure from day one.You are never saving money with these things, you are only going to spend more...
Engines are the same. There is no difference between a 95 eclipse engine and a 95 talon engine just like there is no difference between a 94 eclipse, talon or laser engine. Unless one is turbo and the others are not :D
Here is the best way to put it.I spent 3 years buying all the parts needed to throw a GT3582R into my car, I finally got her fired up for the first time on a 35r yesterday.You have a stock car.This is what I have.$0240.26 Apexi N1 Downpipe
$0563.36 Apexi N1 FULL CATBACK EXHAUST...
Cashier at comic book store
Security Guard
Toys R Us
Pizza Hut
Hardees
Wendys
Linesman at Hawker Energy ( makers of Odyssey Batteries )
Tracker Boats ( Fiberglassing )
Escort Driver
Drug dealer
Bouncer at Deja Vu strip club
Electrician
Roofer
T-Bar and Insulation ( Suspended...
My journal bearing Mitsu tdo6h-20g spins for at least 10-15 seconds with a good hand spin. I can turn off the car and hear the thing spinning after popping the hood. Cant wait to hear the 35r coming in the next couple days :D :D :D
MY very first car I had was a 88 Hyundai Excel. My dad gave me a gas card, I managed to put 16,000 miles on the car in 2 1/2 months. Popped the motor because I didnt know I was supposed to change the oil ( This was 18 years ago ). To say I drove a lot is an understatement.
That line goes to the metal line that runs down to the oil filter housing.I have a 3/8ths barbed fitting but it doesnt want to fit into the hole and I really dont want to force it in there and damage the threads on the water housing. I took the top half of the housing off and am going to take...
How does this look to you guys?Forgive my crappy camera, doesnt take good close up photos, doesnt take good far away photos either, in fact, I dont know what range it would take good photos ROFL
Ok, I had three areas I could put this in, didnt know which one for sure so I picked this one as its what the problem is for.Running in to a couple issues and wondering what you think can be done about this.Situation is, I am currently trying to figure out how the hell I am going to...
Really?The average adult length for the green anaconda, is 18 to 20 feet, with 25 feet specimens being very rare.The Guinness Book of World Records lists the longest ever captured snake to be 32 feet. The heaviest — a Burmese Python kept in Gurnee, Ill. — weighs 402 poundsIn JAKARTA...
Why would you run your car with the boost gauge pegged? Safer to buy a new boost gauge. I dont plan on running 35psi on my new setup any time soon but I still purchased a 45psi gauge to be safe.
Nascar could save money by adding right hand turns into the race, even wearing tires means less tire changes and lots of money saved! All left hand turns is so played out.
Well, from the sounds of it. You may be sleeping with Ace and Gary pretty soon.Rehab wont do shit for you unless you really want to quit, take this from a former alcoholic. I used to get shit faced, I kid you not, at least 5 times a week. My Girlfriend at the time got so sick of it, she made...
If this is a joke, talk about imaginative.If its not, you should lose your license for life because you are seriously not mature enough to watch a pg-13 movie let alone drive a car.Drinking is not an excuse, it doesnt get you a free pass to screw a fatty and it doesnt give you an excuse for...
Not feeling it.Too much extra work and money to spend on something that adds no performance and pretty much makes the car impossible to sell if and when you get out of the scene.To do it right, you are looking at a ton of cash.
20g turbonetics turbo,exhaust manifold ,450cc injectors, blow off valve, external waste gate,255lph fuel pump, full 3" exhaust, cat back system, boost gauge in pillar pod ,aem wideband,boost controler,3inch gm mass with translator,fmic,cop coil,2.5" intercooler pipingOk first off.. 450cc...
I have poly mounts as well, I think the movement is because with my o2 housing, my exhaust was moved forward about 1 inch at the most which caused the problem.
OK. I have been driving around for a few days with the little part of the heat shield trimmed. I have not been able to get as much driving as I want because I am having a few little issues dialing in my 1680cc injectors ( they go lean at 3000rpm up hill at 10-14% throttle ). I have managed to...
Not sure yet. Hopefully very very soon man. Working on dialing in the 1680's right now and once I get everything taken care of on the car, I need to drain the 92 oct in the tank and replace with E-85 and tune the car.Hopefully next month sometime, dont worry, I will let you know man :D...