What's up guys? Been along time since I've been on here. What's everybody up to?

Help to identify a holset turbo--------------------------------------------------------------------------------i am pretty sure its a h1c but maybe its a hy or hx35 variant.heres pics and specs t3 divided hot side. 3in vband downpipe. No wastegate at all. Oil only no coolant...

Why is the 90-96 manual awd tcase different than 98-99?I looked up part numbers at a dealership and they tell me that the 90-96 is part number md758203 and the 98 and 99 are part number md748594.Whats the difference and how can you make a 92 awd tcase work on a 98?I was under the...

Looking for my old 90 talon tsi awd black outside red inside... Vin inside.Trying to find out whats become of it... I miss it. Wanna know what happened to it and where its at.Its a 90 tsi awd converted to 91+ wiring i did myself and it was black with the silver bottom, It had red cloth...

Looking for my old 90 talon tsi awd black outside red inside... Vin inside.Trying to find out whats become of it... I miss it. Wanna know what happened to it and where its at.Its a 90 tsi awd converted to 91+ wiring i did myself and it was black with the silver bottom, It had red cloth...

Those with adjustable cam gears, what are your setting/advise?

4g63 in a mighty max truck how to. I need to find one since i have found a mighty max for 300 and i have a extra motor, i wanna do the swap.The few thing i know is to be a direct swap is the if it is a 2.0 motor and the truck is a manual the 4g63 is a direct swap but if it has the 2.4 motor...

seriously check it out.Hey guys, please help with my mods gone wrong.....I though the guy with the vette who wanted to route the exhaust into the intake was bad. Wow he used about 1/2 of a 25 lb bag sand before he stopped.

Engine harness on 2g same for auto and manual turbo? Differences.Manual and auto ecu questions? Differences?

Timing belt deflection 1/2-(almost 2/3)- 1/8? All brand new oem mitsu parts....Car had all, i mean everything replaced on that side of the motor at 105k it is now at 123k and certain spots in the timing belt i get this.It goes from 1/8 to 1/2-(2/3 sometimes)Everything is new oem...

How to put a 1g awd trans in a 2g and can you fit a dual cam head/8-12 valve on a 1.8?

I know this is the abs sensor and brain i am gonna keep it but i wanna relocate it to the center console behind the ecu.I ask cause both metal covers and mount i am removing for weight reduction.I wanna know will it be fine or does it need to stay in that angle to work?IGNORE THE...

Calling all the vendors out!I am tired of seeing most if not all the vendors with insane prices on some things...Since there is no "forum" For this type of thread i put it in the hangout.For example: A front mount ic kit going for $700-1100+ There simply is no need. It does not...

2g gas tank holds how much gas? I know....dumb... Look insideEvery time i look i cant find it. Ether i find it says 18 gallons or 15?I know it holds more then 14 but i dunno.

How to eliminate the rear o2 sensor on a 2g?VAFQ is a litle hard to understand.Can i just tie it out of the way and plug the hole?Any feedback on that?

WTK? What are all the cars that come with the 2.4 block? ? inside with link?Mitsubishi 2.0 to 3.0 Engine Applications, '88-95My question is the 2.4 blocks look like single cams?? All you have to do is swap the head with a 4g and your good, or do they come with the dual cam head?But what do...

2g Lower ball joint control arm failure? Where and how PICS?Does all 4 lower ball joints fail? Or is it just the inner 2 lower ones?Pics and post your experience.I only ask cause on my driver side my ball joint moves inside the arm up and down a good 1/2 inch. And as anyone know a...

Where to buy longer/shorter 1-5 gear sets and higher 5th gear and rebuild kits?I had the sire but i lost it. I know its out there....I want to know the site or any sites selling the longer/shorter 1,2,3,4,5 gears.I have a 2g.Dont ad this thread to another one unless it...

T-case filled with grease not oil, axle grease or ball joint grease WTF!?!?Well i took it off to upgrade my trans and the ####ing t case is full of grease.Anyone heard of such a thing?I looked everything over and no metal shavings or teeth where present or damage was obvious.Works fine...

Where to buy longer/shorter 1-5 gear sets and higher 5th gear and rebuild kits?I had the sire but i lost it. I know its out there....I want to know the site or any sites selling the longer/shorter 1,2,3,4,5 gears.I have a 2g.

95 Manual awd Talon i bought, yep runs ands drives...Yep had to go to Alexandra VA But it was well worth it. :cool: :D1500 complete virgin 2g only thing was done to it was the wheels.Needs some paint, but what dsm does not...Stock eprom, no rust :rocks: just minor surface spots from...

Questions about how to 6 bolt swap a 2g (just swapping the short blocks out) and other questions about body conversions from 2ga to 2gb talon/eclipse front and maybe sides/rear.I just got a 2g and since i have a 6 bolt motor id like to just go ahead and switch out just the short blocks...

1g awd front and rear struts and shocks fit 2g awd?What about switching the springs or struts out?

The rods let go at about that hp but what do the stock pistons let go at?

How to remove 2g turbo engine harness?With pics etc, and details. Also what tools are needed?I pulled 1g turbo harnesses before but since there is a 2g turbo manual one near me i am gonna get the harness.But i need to know how to remove it. Someone help ASAP!!!

Who here has ship a motor/trans? Got a few questions.How much does it cost for shipping and packaging stuff?How do you send it and how do you build the box for it?

98 ford escort 2.0 zx2 how do you tighten the tensioner for the surpinetine belt?

1998 Ford Escort ZX2 with ztec a interference motor?Timing belt went, and is now missing, so far i looked and i am getting a 50/50 mix saying this or that...Is it a interference motor?

I need help bad mods are welcome...The car is a 90 awd talon manual.Car starts and runs after a few seconds then car shuts off and the starter wont in gauge. The motor dont spin and the starter just comes out and slightly grinds on the flywheel.I have gone through 2 starters that i...

I feel Stupid for asking this, car wants to run on 2-3 cyl and when it cranks it on 2-3 but on the up stroke on one of them it wants to stop the whole motor or make it jerk then stop hesitate then crank. Almost like the timing is off.I have the coil pack right and wires right looking at it...

I am calling you out, wheres the #1 and last vr4 galants at?I know #1000 the last one made in 92 is some where near MN. Look what I found... - DSMtalk ForumsBut Wheres the rest?

KEEP THIS THREAD CLEAN>!!! No name calling or threats.Hate to say it but... I AM GLAD GAS PRICES ARE HIGH. Look inside for my reason.Hate to say it but its time we seriously cut back on are amount we use.Europe average MPG is 35ish, japan is 50 MPGish, While USA takes the cake with an...

How much fluid does the trans, t-case, rear diff etc hold

How much does the 4g63 fwd turbo trans and complete turbo motor weigh? I am trying to plan out a configuration for mid engine rwd...

I was gonna work on my car when...I suddenly relized that i have done alot of stupid shit.Which lead me to thinking of my car i sold. I sold everything off the car not even a few weeks into it running, 50 trim turbo, safc, 3 eprom ecus, 2 non eproms, 1 chipped 90 eprom, 650 injectors...

How to remove 2g headlights? Pics? Its a 96.

Who here runs the gm maf with or with out the screen while spraying meth injection Any problems with doing it this way?I dont wanna run the screen though i know it help straighten out the air to go over the filament.Any problems with meth injection messing up the maf?I am thinking of...

I got a logger and a 1g maf translator, anyone have directions for install?Also if you have a link for the logger software? Also i dont have the cover on mine is there a way i can get one?

How to tell FIC injectors apart need numbers to identify 550-650-750-etcI ned to be able to tell them apart so if someone could list the part numbers for each.Thanks.

When is the next price drop ps3/360, and can u play ps 1/2 games on all ps3 or is it just the 60 gig version?PS3 can save ps1/2 games on the hard drive with no xtra memory cards? Has any one over heated a ps3 yet?

Wow, another friday, saturday and sunday wasted... No friends to party with, no chicks to pick up since the cars down and no money.Who else is joining me?

Arp headstuds with moly lube torqued to 90 ft-lbs. Car never ran, deck surfaces flat. Block is with in .002 and the head is within .003 (Still within spec). Torqued in steps of 25-60-85, correct order.No gouge marks in the head or block surface. Car has a cosmetic head gasket and arp's i...

Need help with 2 connectors, under dash, frame harness pics inside need help ASAP First 2 pic is looking at the car like this looking at the driver side door looking into the car from the outside through front window the last 2 is from the inside like you are siting in the seat.The dash has...

Turbo XS Blowoff Valve Type-H HKS ver.2 SSQV Blowoff Valve TiAL 50mm Q Blowoff ValveI wanna know what the loudest of them all is.I would also like sound/video clips of each one or any suggested ones.How do you tell a fake bov ebay (i am talking about he xs one but any and all...