Having a modified car is breaking the law. So going by your logic you also have no respect for "the law".I have 40% on my windshield and 5% all around and I have had no issues. The tint on the windshield isn't bad at night, and it keeps the in car temps down during the summer. I've had it...
I recently purchased a 1991 GVR4 with no motor tranny or tcase and im trying to hunt down a tranny and t case and I have run into this problem. I don't know what spline count to get. I got down there and tried counting the splines but I'm only getting 20 and there is a big gap in there. So i...
I recently purchased a galant vr4 with no engine tranny or t-case and i haven't the slightest clue how to go about installing one. So my question is do i need a 1991 galant service manual and that will cover the vr4 or do i need a 1991 awd tel manual and that will cover the 4g63 engine. or is...
I was lowering my car off of jackstands after getting done with an oil change, and i hear a loud crunch!!! Needless to say I knew something wasn't right. I jacked the car back up and couldn't find anything wrong. so i lower it back down and hear more crunching. We'll my dumbass left the...
My current GF has a server case of ADHD. Shes on adderall for it and unless she takes it she cant do school work or stay focused for more then 5 min. but when she takes it you would never know she had ADHD.
I wish i could tell you. Its black and has rust all over it. besides that i know very little about it. All i know is that it worked and now it doesn't. i asked my grandfather and he is unsure of the brand aswell. how about as far as weight wise? what would be sufficient for a DSM. a 2 ton...
Thanks guys i appreciate all the help. I think i'm going to go with a harbor freight one or this one from jegs. seems to be a good deal for lift height and weight http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_464793_-1
Ok i'm looking to get a good floor jack, as i have been using my gandpas older one which finally gave out. So my question is what size should i get (2 ton 2 1/2 ton 3 ton etc) for my dsm? And does a name matter all that much when buying a jack. Does a craftsman 3 ton really hold up that much...
i too run a dejon tool dual stage mbc. i went to the junkyard and pulled a OEM hazard swith, and rigged that up in the blank spot under my normal hazard light switch. i run 11 pounds in first and then switch over to high boost which is 14-15 in second. works great.:thumb:
Anyone on here doing this. You get points for the coke you drink and then redeem them for stuff. Just wondering if i was the only only one doing it, since i haven't seen another post about it. and if anyone has codes they don't use feel free to pm them to me :thumb:
ok i checked the front o2 sensor as well and looked at the injectors. I went to turn the car on and my logger said i had these codes. p0110, p0300, p0105, p0304, p0100. :mad:P0110.....Intake Air Temperature circuit.
P0300..... Multiple cylinder misfiring detected
P0105.....BARO...
First off i'd like to say that i've done much searching, and alot of replacing already, and i'm still having this problem. About 2 days ago i was driving on the highway and my car starts sputtering then it threw a CEL. i get it home and listen and it sounds like it's starving for fuel. first...
I hooked up another switch for my dual stage boost controller, in the empty spot under the hazard light switch in the dash. so it looks like i have three stock bottons and when i push it in it raises the boost to 16 psi, when it's out it's 11psi.
So i've been doing alot of work on my engine lately, and i've noticed the fenders getting scratched from leaving tools on them. so I looked on ebay for fender covers and saw that the mustang and camaro guys had alot of custom ones. So i was wondering if anyone knows where i can get fender...
Why is there a pic of an evo in the screen shots. but it;s not on the car list?http://media.ps3.ign.com/media/826/826965/img_3796214.html
http://media.ps3.ign.com/media/826/826965/img_3739868.html
Sorry if i mislead you. i don't plan on droping my car at all. it just didnt have a place to put stock ride height. and i would roll the fenders if i had to. just trying to get an idea of what tire and rim combo i can run without haveing to deal with more headaches then nessecary.
Ok so i can't run the rims i posted without rolling the rear fenders and changin the rear camber. what would be the widest tire i can run without having to roll the fenders and adjust camber?
TIRE SIZE RECOMMENDATION REQUEST FORMPlease answer the following questions when requesting tire size recommendations.1. My car is a:
a) 1g DSM
b) 2g DSM2. My wheel size is: stock. This is the size i want to put on
Diameter: ___17__
Width: ____8_
Offset: ___38mm__3. My...
ok first off i'd like to say that i did do multiple searches and came up with information that only made me more confused. I want to put a set of 17x8" wheels with 38mm offset 5x114 and 245/45/17 tires. will this fit on my stock 2g or is there something else i need like wheels spacers...
1) Do you drive a DSM or a Honda Civic?Make: Eclipse
Model: GST Spyder
Year: 19972) How much WHP does your car have?
220ish3) What top 5 modifications (if applicable) does your car have done to it?1. APEXI SAFC 2
Cost of part: 150
Cost of install: 0 did it myself...