I was re-installing my turbo, and noticed my oil feed line wouldn't fit. I don't want to bend it and kink it by accident. Does anyone know where I can get a stainless steel line to replace it? I've been looking around and found something on Slowboy, but I dont know what else I'd need besides the...

I was swapping out my transfer case, and the new one doesn't fit on the input shaft. I was wondering what transfer case I got then. I guess its from an automatic? Is there any way to make it fit?

I ordered an Autometer mechanical boost gauge yesterday, with a pillar pod. I was searching for anything on how to install it. The main problem I see is how to run the tubing. If anyone has any tips, or knows where to re-direct me, that would be great!

I took out my ECU because I'm having an idle problem, and I narrowed it down to that. I was looking at part of its case, and there is a spot on it that kind of looks like a scratch, and there's a lot of discoloration on it. It looks like something shorted out on it.Sorry for the...

Today I noticed that when my GSX was decelerating, in gear or not, it was making a really loud noise. It sounded like 2 really large, straight cut gears with only a few teeth, if you can understand that. Accelerating was no problem, but I could kinda feel the vibration, but no noise. It only...

I tried a search but couldn't find anything. Kinda suprised. Anyway, when the radiator fan comes on, the engine starts bogging at idle, and sometimes dies. I thought it may be the increased load on the alternator, but one fan can't be that bad. Funny thing is, it will idle normally if I switch...

I tried a search but nothing came up. I'm trying to replace some lug studs on the passenger side wheel on my GSX. I'm just wondering how the hub comes off. I got the caliper and axle nut off so far. I thought the rotor would pop off, but it wont move. My shop manual doesnt give any detail about...

I'm getting the weirdest noise from my transmission. It only happens when the trans is spinning. If I put the car into reverse, it stops. It sounds like a bicycle wheel with a baseball car rubbing on the spokes, you know? I recently replaced the center diff. Could it have something to do with...

I had the sick idea of building up my own twin turbo 302 (5.0) motor. I already have the motor and the car ('65 Mercury Comet). Just curious as to if anyone knows where to get stuff like turbo manifolds for that motor, because I'm having trouble finding them.Possible set-up:Two garrett...

Every time I let the clutch out to accelerate, I get a banging noise from the drive train. When I decelerate, I get the same noise. I think its the rear. Any input?

I need to find two new 36mm nuts that hold 5th gear in place. I cant find the proper one in any parts catalog. I replaced my center diff, and I had to remove them.

I'm looking for the spring and ball that lock the selector rod into place. I dont know what its called exactly. Its for the 5th/reverse selector rod. The ball and spring popped out when I was changing the center diff, and now I can find them.

Are the 1g and 2g center differentials the same? The one in my 1g went, and the only one I could find was from a 2g. Also, just ot be sure its the center diff, the front wheels are not powered, while the rear wheels are. Does that mean the center differential went?

Is there any way to block the FIAV without taking off the bottom part of the TB? I tried to take mine off, but the screws womt come out. I'm afraid I might strip them, and I dont want to take any chances. If not, am I going to have to buy a new TB?

Every time I shift, I get a really nasty clunking noise from the car, and it makes an even nastier one when I let out the clutch. As an experiment, I reved to about 3500 RPM and let the clutch out kinda fast, and the back wheels spun pretty well, and the fronts stayed put. It seems like the car...

I had my car on, not running, and the fuel pump was running. I heard a hissing near the fuel rail / injectors, and thought maybe it could be an injector stuck open? My car has idle surge, and everything has checked out fine so far.

I'm looking for a center differential rebuild kit, and I can't find one. I called my local dealer, and they couldnt find it. Does anyone have a website I could get one from? I tried a link in the v-faq about the center diff that took me to www.partznet.com, but it didnt work.

Another thread about my idle surge! YEAH!Anyway, is it possible that my ISC is stuck closed if the engine stops surging when I take off the brake booster vacuum line and let it suck in air through the inlet? It seems like more air is better for the surge, and that it has to be caused by lack...

I looked at the hood, right where the battery terminal would touch, and there was an arc/weld spot on it, and the wingnut on part of the positive side of the terminal was roasted off. It shorted out, and I think this may be part of my idle surge problem. The ISC checked out fine, but could that...

I was checking the vacuum lines for leaks and what not, and they all checked out fine. I noticed that when I took off the line to the brake booster, and didnt plug the inlet up with my finger, the idle smoothed out completely. I came to the conclusion that the surge (about 1250-1500 RPM 2 times...

Searched, thought I found it, but I didnt. Anyway, I was driving the car, and after I shifted into second, I start getting this clunking noise from the drivetrain. The frequency of the clunks depends on the car's speed. When I accelerate, it almost goes away, but when I decelerate with the...

When I put my GSX into reverse, one of the wheels is sort of reluctant to turn. It will start moving, but it will stop and skid, and then start again. This is usually when I back up and am turning the car one way. It can happen to both wheels. I also noticed it happened a couple times turning...

I saw a picture of a 14b turbo, and on the compressor housing, it said "TD05H." I have what is supposedly an SBR small 16g, and the compressor housing says "TD05H." Does the s16g use the same compressor as the 14b, or is my turbo in fact a 14b?

So, I'm messing around with my Eclipse in the garage. I'm revving it some for my friends, and they tell me its smoking. I asked what color, and they said it was white when I hit the gas, a puff of blue when I let off, and white till it calmed down. So, I wanted to pull the lower intercooler pipe...

After I start my car and it warms up, the oil pressure gauge drops down about 1/2 inch below the "Normal" range indicators. The oil pressure light doesnt come on. If I drive around normally, it goes just above the "normal" indicator. It wasnt low the last time I checked (yesterday) and I dont...

I'm putting together my list of parts I want to get over time. The fuel system will be first.I have a '91 GSX, and it already has an SBR small 16g on it. But I dont know how good it is. Let's assume I'm going to build off it.Walbro 255 Aeromotive AFPR and fuel rail 650's SBR street...

I just picked up my Eclipse this weekend. Its 1991 GSX. It has some little problems here and there, idle surge, stuff like that. Otherwise, its OK.Anyway, and yes I searched, If the car is running and sitting in neautral, and i let the clutch out, I get a whirling whining sort of noise. I...

I plan on buying a DSM in the near future, and I am wondering which rear is better. I read that the mid-92's came with 4 bolts and the 6 bolt motor, but is the 4 bolt really that much better than its predecessor?