Okay here it goes, I started my car this mourning and that got out to brush the snow off the car. The doors locked (alarm) with the car running and I needed to get to work. So I went to the garbage can in hope of a hanger instead I found a piece of small diameter PVC piping. I pulled back the...
Okay here it goes, I started my car this mourning and that got out to brush the snow off the car. The doors locked (alarm) with the car running and I needed to get to work. So I went to the garbage can in hope of a hanger instead I found a piece of small diameter PVC piping. I pulled back the...
Okay the other night I noticed that at idle when I would press the brake pedal the lights would dim. When I would use the turn signal as soon as I hit it the lights dim real quick as well as all the dash night lights. The ALT is new and the battery terminals are tight. I have never noticed this...
I have the dejon tool uic piping but only to a little past BOV, all the way to the throttle body isn't going to make a big difference on stock cars. Pull off passenger side tire unbolt fuse box to get it out of your way, take the bolts out of the plastic fender liner so you can get to the...
Okay so I am pretty much stock but hope to have a better setup soon. Here is my question, just installed a safc2 and I have the ne-points at 1k,2k,3k,4k,4.5k,5k,6k,7k,7.2k,7.4kthrottle at 30% and 80%low throttle never in the negative all positive not exceding positive 7%High...
It's not that hard, about 6 or 7 wires, all you have to do is pull the clips from your ecu (the plug ins) and look at the diagram and tap into the correct wire with the correct color wire from the afc
Not smart to talk about stolen goods. The car could be very fast with proper mods just don't be one of those honda's that rev up their engine when a DSM is passing in the other direction. t3t4 for that piece.
My 2g stock would hit almost 14psi with no MBC so each car can be a little different. Glow shift guages are pieces of sh#t, at least I haven't had good luck with them. Autometer is what I run now. I'm spiking like crazy since my uic pipe install with 1g bov. Don't really no why but my main...
Okay so now it's back in fourth, in second gear the boost will fly up to about 18psi if I get on it in the low rpm range. If I gradually get up to about 3500 to 4000rmp and the floor it the car will not boost pass 15 to 16 psi, same for each gear except third somtimes does it no matter what(hits...
the line off the top of the BOV is running back to the intake (stock) BCS was never messed with so I don't know why that would be a problem. BOV is used so no I am not sure.
With 10 to 11 psi you should be fine, try getting the software used on dsmtuners class, or ebay. 1000 miles is a good break in period but I wouldn't go and run 20psi right away break in the car gradually, after about 2000 if you want go crazy.Oh yeah I second the logger
Okay so I just installed a UIC piping (Dejon) with a 1g bov. My car is pretty much stock with the T-25. First I had a huge boost leak so I cut the coupler and that seemed to fix my first problem. Okay on to the question, although I love the sound of the new BOV, every now and then I will hear a...
Keep trying to contact corperate and maybe you will get those free tires, don't give up man! Make it a goal to make them either give you the tires for that price or for free!
Okay so two pilots board a plane with a seeing eye dog and blind mens canes. Tap tap tap as they make their way to the cockpit. People on the plane start getting nervous when they see that there is blind pilots entering the plane. Everyone looks at each other as if they were all thinking "is...
A good friend of mine just picked up 1000rr cbr, man or those bikes crazy. The bike had 129 miles 2004, bought it from another friend of mine 7500.00, not a bad deal. The bike came with a twinbrothers exhaust, and a electronic afc hidden underneath the seat. I will post some pics you guys and...
Yes I have a autometer guage that is brand new and one of my buddies that works at AMS made sure that I had it hooked up right! The guage reads 0 when the is off and about -20 when the car is at idle.
I have researched this question but could not find the answer I am looking for. Here it goes, I have a 95 tsi no MBC some mods but nothing major. I am hitting 14 to 14.5psi with a psi drop to about 12 to 12.5 high up on the rpm range do to stock BOV and probably other things as well. I haven't...
They should of taken your kid and crushed your bike, I can't believe your story! If I was the judge you would only be able to see your kid when a child service agent was present.
I know your probably pissed at me for saying this but come on this is just fuc&ing rediculous!
I would just make sure all the routine maintenance is up to date. You might want to build that motor up a bit. I would put some stonger internals in her. One of my buddies boosted about 11-12 psi on his stock 420a and it didn't last to long! Check compression, do a belt job, all fliuds should...
Good place to hook power source for the lights of the guages is you headlight switch! just pull the cover off the drivers left hand side where the fog light switch panel is and hook the wires their and route them back up into the pillar.
She was go down the drag strip the car flipped spun around, facing the other way with throttle stuck wide open she headed back toward the starting line crashing into the teams truck killing her and her son!~
I't could be a bunch of things, once you figure it out upgrade to 550cc or bigger and a new fuel pump. Also even if all the coolant leaked out, you can still start the car just don't run it for more then 30 seconds or so and watch you temp! maybe 15sec to be safe.
16 psi is about it with a t-25, anymore boost then that and it will just drop back to 16 or 15 psi. I agree check your vacuum lines make sure there hooked up. What kind of gauge are you using to measure boost does it point to zero when the car is shut off? Also if all vacuum lines are hooked up...
I'm not sure about sealant but I just used a little bit of sandpaper only sanding down the little spots of rust and then just using touch up paint until I get the money together to get a new paint job works fine, not the best.
Shops will charge you to remove tint, the judge doesn't know how much it will cost but if you want just lower the price to make it sound better. Yeah you can do it yourself but the judge isn't going to tell you that you could do it yourself. Use what ever you can to build yourself up, school...
Also let the judge know that you are limited on funds and that you have already been getting quotes on removing the tint-125 from one place 150 from another so that he or she might give you a brake and a time limit to remove the tint!
Police officers are suppose to show up for court, nine times out of ten if they don't show then the case will be thrown out! However if the judge wants to he can make another court date but for a traffic violation of this sort I don't think he will waste anymore time. I would go to court tell...
A tire Iron and a knife can both do damage instead use some good old one two puches right to the kisser. Make sure you hit the person in the ear (hand clap) or square in the mouth. For best resluts hit the person right between the bottom lip and the chin for they will most likey not want any...
Okay here it goes as many of you have said before it is illegal to have tints on your front driver and passenger windows in IL. The police officer does not need to use any tool to measure the percentage of tint that you have. If the police officer cannot see you when your window is up then you...