Anything happening in the houston area. Havn't driven the DSM in a while and could use a bite and a chat if anyone is interested.

Ok here is the skinny I will tell you all about fuel cut hopefully for everyones benefit (My grammar is off tonight work with me here).Take out a pencil cause this is my kung fu and it is strong!!! :thumb: (anybody name that crappy movie?)I will try and step through this slow so...

Semi back from a very needed hiatus...Things are extremely busy still so my presence will nto be full force but I felt I owed people my thoughts on this.The original thread a pictures can be found here. http://www.dsmtuners.com/forums/showthread.php?t=108000&highlight=crankbenderIMHO...

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7909444604&category=33632Is it just me or is this thing missing a place for the 4th injector?

Guys I could use some of your help here....What does your IC weigh. Stock and aftermarket....extimations are ok but shipping weights and such are probably better.

With the classifieds set up as they are I don't know how I would put this in there.I will be making a run to the junk yard here very soon. They have about 20 eclipses there and I know they have at least 1 14b with no shaft play (looked at it myself) and a 4 bolt rear end. Anybody want me to...

DSM tuners ideas hopefully becoming a reality.Many of yall on here know me, some of you don't. Either way it has long been my dream to make true performance parts that work the way people actually want and need. I am trying to get some things going...see the following thread for...

Currently solid modeling the new design of BOVs specifically fitted for DSMs.Let me know if you have any special requirements (blow off vacuume, color, etc).I will include some drawings with the decided upon values in the comming days.What do yall think about a BOV that you can...

Ok I am going to lay down some rules on the boards (non-official) that I can link people to when they would like to bench-race or just compare cars.#1 NONE of us here compete on a pro level. We don't have tube frame chassis cars. We don't run nitro-methane. We don't have a $50k engine that...

Come on I stop posting for a few days and become an integral part of a thread.http://www.dsmtuners.com/forums/showthread.php?t=124918&page=2&pp=25&highlight=crankbenderAnd the worst part is I missed it all!!!!Good luck ghettofying me. I actually grew up in what most in the US would...

I am currently spending some free time designing parts for the DSM. Assuming I can get suppliers and all for the parts and good prices from the machine shop I will get them into production. What things would you like to see to make your life easier.Project #1 is currently an IC+CAI system...

so you think you have problems that can't be fixed easily? get this:My girl's mom doesn't like me because I use words she doesn't understand......WTF am I suppose to do about that shit?

I HAVE to do some research on DSMs and some of the info I can't find and isn't easy to measure.....Please help me find these things...I will be forever gratefull.I will post up the info as I measure it.....need to get this done like yesterday.car 90 AWD (if you have info from another...

With all the girl problem threads here I thought it would be nice to hear from all the DSMtuners who are happy with their significant other. Just to brighten up everybodies day.I am quite thankfull for my lady....Yes there are little things she does at times that annoy me but a day just...

Seeing as I missed the other picture thread thought I would post one of me up.No it isn't PSed...Yes it was a blast.

I thought we could get together and list all the little tips for people who don't know them.Please keep them short like any of the ones in my sig orDropped clutch + AWD=broken tranny partsThings like this. Once the thread runs for a while I will collect everything and make an...

Seeing as there is a thread about the 3rd movie and people had to talk about them I thought I would give you a good place to do it so it doesn't crowd any other threads.Not to mention I find it fun to find problems in the movie.Heres my initial list (I will leave a lot to you)Gs...

My friend Honda (not related to the car guy) told me he is ### :(What should I do?

Keep names out of this and keep it funny/informative....no flaming!!! Please no arguments or long stuff in this thread..keep it short and sweet."those things come TT stock""where do I add my boost fluid""Eclipses are better (mechanically) than talons because mitsubishi made them"...

My other car.

Ok there are as always a lot of people asking about turbos. Well I made it a little bit easier on everybody...Below are the graphs showing the flow rates (in CFM) as well as some representitive flow rates (in lbm/min) with a few different configurations.Hope this really helps everybody...

I am getting sick of the lack of well engineered parts for our cars....I mean crap it is easy as crap to design a BOV that will hold 200psi and blow open at <5inHg......you just have to refrence it to the atmosphere.Is anybody interested in me drawing this thing up and making one...do you...

This is not for flaming. I would like to just get honest opinions about the subject. A little knowledge for all :DPlease include any experience along with costs.Don't be stupid and say things like DSMs own all or Honduhs suck and stuff like that. I seriously want to know what people...

Well I am finally to the point where I am about to buy a new car (with warranty) so that I can take the DSM down for rebuilding.Anyway what all have yall driven and how did you like it. Everything from a corolla to a F-150 is on the table at this point.

Just lookin for the bill+ Bottom of a bottle - smile empty soulAngry -TBA

heres one

I will try and keep the math out of this.Ok there seems to be a million people asking about boost creep and how to fix it. This has prompted me to write this to help everybody get on the same page and ask the right questions. To properly understand this lets do a little examination of what...

What would yall change/add to this list.Full race trailer DSMEngine (anybody with real proof the 2.4 is worth it) Crower or Eagle rods Ross or Wiseco pistons (.040 over) Bearing kit Stock crank Electric water pump Ems Cams (crower probably) Gasket kit Balance shaft removal 1mm...

What does everybody think of their stand alones? I know the EMS (dolla dolla bills) is a good product if you have the time to make it right but I donno too much about the others out there.Just wondering what yall think of the different stand alone computers that completely delete the ECU.

Over the many years I have been around turbo cars I have had to explain this countless times. Maybe I will write up a faq for the site if the moderators are interested.First off a good understanding of what a turbo is and how it works is needed to delve into this subject further...

Anyway finally picked up the 90 talon last weekend but all is not fun and games in this garage. First off on the way to pick up the truck and trailer to get the AWD I freggin lock the tranny on my convertible. It was traveling down the road at 65 and decided it wanted to be in 1st...

Well i have to change the water pump on my new car and with it I will do the 13,000 mile old timing belt. The question is what would happen if you just pulled the belt for the balance shaft off? Has anybody done the shaft removal and if so how long is the shaft (can you get it out with the...

Well the day has finally come when I will be getting a new car. I have picked out a 90 tsi awd and am looking forward to the build up. I will have a digital camera available at all times when working on the car and intend to catalog everything so let me know what details you want to see...

What gauge are you running? How much did it run you? Do you like it? What EGTs does your car usually run?Just wondering what kind of success yall have had with your gauges.

I wanted to repost this so that people could see it even if they didn't read the dyno posts. I have heard alot of people talking about a bigger turbo making more hp at the same pressure...this isn't exactly correct and I hope this helps show why. You need to get a turbo that does what you want...

Lets just ask that if you were not paying attention and an AWD were towed without a wheel dolly (rear wheels on the ground) what would break???I would think the center diff would go for sure.