Curious to know if there is a way to pull all current settings,tables etc off the ECU in V3 to save as a back up to fall back on if there ever becomes an issue. Just had the car tuned so don't want to start hitting save to ecu unless I have a fall back. I've searched and emailed Link with no...

ISSUE: I recently installed a USED 38mm MVS with a new bull fab open dump O2 housing and "new/rebuilt" 20g turbo setup (turbo came from Jeremiah Morrow.) -Currently I am not able to reach more than 1 PSI of boost pressure at any point in the RPM band. it runs smooth and strong like an NA 4G63T...

SOLD PLEASE DELETE

AgntorangeDSM submitted a new DSM Profile :Daddy's Spyder BuildRead more about this vehicle here...

I'm having trouble with my Maft setup. I installed it today and set up the injectors the way they asked but from there i haven't a clue what to do since my log readings are messed up!! I'm using the TechnoMotive and logging on my lap top and using my SAFC-1. I have a crappy running car at this...

I bought MachV's SS brake lines, and in the process i decided to give the PowerBleeder a shot. I bought the setup and when received i decided to do it when my buddy was gonna drop my tranny and install my new clutch and fly! Alright, i pull the bleeder tank out and take notice the very nice...

Yes i've searched this and i've read the searches and all i have found was CV's joints strut mount bolts loose. And they are all dealing with turning. I noticed my clicking when i was at an incline at a stop sign and i put it in first and gave it gas and on the pass. side a heard a Click! so i...

Hey every one, i've searched and searched for this and emailed companies and checked Blitz's website and can't find the wire diagram for the Blitz BLM EGT, wires go as follows:Orange: unknown White: to Probe Red: to Probe Yellow: Illum Red:constant 12v Black:groundthats all i know...

So i went with this guys How To thread and it DOESN'T work according to HIS instructions and Diagram. http://www.dsmtuners.com/forums/showthread.php?t=224551&highlight=Cyclone i have the same summit switch and its hooked up to the same spot my shift light is so know i have rpm signal and the...

Hey guys, i just got done painting my brake calipers and now i have poor brake power. Meaning i had great brakes with little to no effort needed to stop and now after painting the calipers i HAVE to pump them to gain pressure and the pressure only lasts as long as i'm stopped meaning the moment...

alright this is mostly a vent but also because i just wanna hear other's opinon's! i was driving on sunday about 5pm when i was coming down a hill when i noticed a cop sitting a stop sign waiting behind a car to turn. well i really didn't pay much attn. to him because i wasn't doing anything...

Hey everyone, i have a question. does any body know how to pull the shift lever off so i can put a new oil seal in? haynes has nothing as far as i see. the seal part number is MD747660 if that helps any. thanks

I have searched for this and have only found people that have the stock 1G plug and in VFAQ my wire colors do not match up. So if any one can help that would be great.My stock wires coming from the wire harness are: Green/Red, Green/Yellow, Green/Blue, Red, Green/Black, Green/Orange...

i have just recently put on a new Dejon BOV on my 1g and now i have idle problem where it seems to run between 850 and 1050 rpm's and my vaccum will read 10?? i have done a leak test and have found zero leaks in the system :confused: if any one has any ideas to help that would be great!!! thanks

so last night i was driving around town when my power steering belt went out i took it off and all is well for now till i get a new one, but now my accessory lights are on when i idle as if the are is off but in acc mode?? i checked the belt and it is spinning too i have no idea really what this...

Hey every body! so i just bought a new throttle body from another DSMer here. i checked all the sensors BEFORE putting it on and all seemed good. i got it bolted on and no leaks!! so i a had a good nights sleep and in the morning i started it up and i ran fine, i started driving and the CEL...

well heres the deal, a some kid was hanging around a group of us one night and he gave me a Cobalt Boost/vac gauge, sweet huh??!! lol well only one problem, i only have the gauge and its electric so i have no wire harness and the only thing i get from autometer.com is a wiring diagram as if i...

any body know why my idol would be at 2k and if i tap the gas it drops. but now lately if i tap the gas it drops but goes back up between 1.5k to 1k rpms?? i checked for boost leaks and found none. the only thing i did find was my bov circ tube leaking air and if i cover it it drops but will go...

these guys look like they are having the time of there lives!!http://videos.streetfire.net/video/3320AD57-8C19-49B3-BCDE-3F25D8DB9D67.htm

I am just wondering what the symptoms of a bad TPS would be? the nut on the spring side of the throttle body was wrenched on!! so my guess is its broke. heres the kicker though, i went out earlier with a buddy and tuned my safc and every thing ran amazing; it a strong pull and every thing. i go...

well its been about 2-3 weeks since i quite my job at a local skate shop! i was only making $5.00 an hour and only getting 8 hours every two weeks!!!WTF now i know its a skate shop but still thats crap! any ways how many others out there are struggling with the no job no income project dsm...

does any body know where i can buy a new or used "good" working internal waste gate actuator for 2g o2 set up?? looking to be under 50 bucks?? well i guess i have poor spelling and grammar on this post some where??? i'm confused thats all but what ever back to english class i guess!! lol

ok so lately i noticed that if i push my car half throttle it will hold around 15 psi and as the rpm's rise around 4500 to 5000 my boost just climbs fast to 25 30 psi and i did a leak test and just got my mbc hooked up and it still does it! WTF im confused and help thougths and ideas very...

ok so i have been reading and see people talking about wastgate solenoid's and thing that is on top of the maf area. well i don't have one and i was wondering what this might mean?? :confused: do i need one?? it has cylcone motor swap and it seems to have unused plugs on the pass. side...

Ok so here's the deal, i was driving my talon down the interstate when i noticed that when i wot it the boost gauges goes all the way up to 25 30 psi !! :notgood: and i know that i'm not boosting that much! so my buddy dsmrevolution told me to do a boost leak test:thumb: well i found three...

so i was cleaning up my garage today and i found my old 5" auto meter tach and i was thinking of a good place to mount it but was kinda clueless on it, so i thought i'd get some ruff ideas from others. it came with the car when i bought it and was mounted in the upper left part of the dash and i...

Hey every body, so i'm not real sure how to explain this but i will try the best i can. i have a leak on my tranny were my shift lever goes into my tranny. i have been told its just a seal, well were might i find this "seal" so i can clear this stupid leak up. any other help is great as well...

So i bought my 1Ga from a local kid that did a auto tranny to manual tranny and now i don't know how to wire up my reverse lights to turn them on. there's a plug already on the tranny i just don't know how to hook it up?? any help, links any thing?!?!

Hey every body hows it going, well i picked up some rims from a buddy of mine for 100 buck with good rubber on them, but they have slight curb damage. so i am going to paint them and i thought i would get some opinions from others on what color looks good. the rims are motegi mr-7 and my car is...

I was browsing throw Ebay and i came across these tail lights and i was just wondering what others might think of them? the are the euro design with the amber corner turn signals, i'm personally a big fan of doing the JDM or Euro conversions over USDM stuff to be uniqe! so opinions please...

any body know what a rattle noise coming from my tranny might be. it does it only when its cold like around 10 to 20 degrees?? i'm thinking a throw out bearing?? the noise it self kinda sounds like a metal on metal noise but if you put your hand on the tranny it's self you can feel it when it...

Alright heres the deal, i was putting on a new o2 sensor and i acciddently arced over into my altenator :coy: , now my local shop hooked up a data logger and tells my i burnt out the o2 part of my ECU cause they weren't getting and feed back on the data logger from my o2, so my q's is: does any...

just wondering if any body has some ideas on how to mount my aftermarket CD player in my center vent so i can open up my lower Din's to place guages, so i wasn't sure exactly how to mount my radio up there and have it sturdy but still look good and clean?? and ideas would help! pics are better...