Ok, drilled a hole and bolted starter on without any problems. Car starts up as the key turned over. Problem solved! When i put the radiator on, i made a leack on it, anyone knows what to use to stop radiator leaks? Its just a small leak.
My gst had similar sound from the engine, came down to be rod knock and replaced the motor. Is your motor showing overheat while you driving it? If it does, stop driving it, it might damage your motor.
I had similar problem with my gst before. It was the ignition coil going bad, and had 2 cylinders werent firing at all. Also, check your spark plug wires, make sure they are in the right order.
I called JNZ today, and told them about the issue. They can order the plates, but wait time is next week tuesday. But, they also told me i could just drill a hole to bolt the starter on it, and they done that before with no problem. I guess i will go with this way. We will try to put the...
Hey all, I searched the whole google and tuners and havent got me cleared. So, Im starting a thread to hope someone can help me with my problem. I just finished doing an engine swap in my 98gst. The engine I just installed happens to be an engine that came off a 95eagle talon tsi awd. Mechanic...
Hey all, I searched the whole google and tuners and havent got me cleared. So, Im starting a thread to hope someone can help me with my problem. I just finished doing an engine swap in my 98gst. The engine I just installed happens to be an engine that came off a 95eagle talon tsi awd. Mechanic...
My cars is doing a swap. The starter doesnt fit. Anyway, i got a question to ask too. I bought a 95tsi awd motor with no starter and going to do a swap into 98gst. The first i thought i could use the starter from my current gst motor, but it came out to be too small. I replaced the awd...
Hello guys, any suggestions will be greatly appreciated. I pulled battery, had it check at AutoZone, its in great condition, replaced spark plugs and wires, starter clicks when the key turned to ignition, then engine cranks about 3 seconds and died. I am totally cluesless now. I read all over...
http://cgi.ebay.com/ebaymotors/EVO-3-16G-Ported-Turbo-DSM-ECLIPSE-1G-2g-w-install-ki_W0QQcmdZViewItemQQcategoryZ33742QQitemZ8036460451QQrdZ1QQsspagenameZWDVW
I saw this package on ebay sells for $399 + $41 shipping, anyone bought this turbo before?
I bought the car with vented bov, and the car doesnt like it. The idle bounds up and down all the time even though i adjusted biss, it doesnt do any thing still. So, im thinking about recirculating the bov. I searched all over the places, no luck on finding a kit for it. I have greddy type...
The car has no boost leak, i toke it to the mechanics and also i have a brand new greddy type rs installed and the intake filter still flutters. It started having this sympton after i reved enigne very hard once.
Hi everyone. I got another issue now. Ever since i raced an integra my intake filter started to flutter (its sounds like te te te te te te te) at low boost. If the bov opens up completely then it doesn't make any noise. I went to local custom shops the mechanics around here had no idea what it...
Hi everyone, i started up my car this morning and the cel light came on. I went to autozone and got it scanned with obdii. The scanner read p0300(random/multiple cylinder misfire detected) I just changed the spark plug wires (ngk 8.5mm from RRE about 2 weeks) and spark plug (bosch? from...
Hey fellows, got a grinding noise more sounds like something is loosen at the lower passenger side whenever i step in the clutch. I searched and read the past posts but couldn't find any symptoms related to this. It only makes noise when i step into clutch and shifting above 3000rpm and goes...
yeah, i called him tonight, he seems nice and told me to give him a call tomorrow and set up an appointment. Hopefully as you recommented, he will fix the problems. Thanx!
Ever since i had the car, it got problems here and there. Now, with the check engine light throughing the code P0170 and 15 miles per gallon highway mileage I'm very frustruated with my car. So, do anyone knows any shops that i can take my car to and get the problems fixed. I dont mine where...
Just change the o2 sensor today, and had shop to clear the code. I prayed the light wont come on, but unfortunately it came on after i drove the car around 10 miles. Getting really frustrated on the car. Any ideas?? For such P0170 code, what else could be wrong besides o2? I'm willing to do...
Ever since I had trouble starting the car in the morning, i went to ask my mechanic and he told me it could be the bad temp sensor. I know 2g dsm has 2 temp sensor one for gauge and one for the ecu, since gauge reads the sensor and seems normal i guess the one ecu reads is bad. But, i searhed...
My mechanic told me it could be the temp sensor. Mines 2g and it has only 2 temp sensors, one for gauge and one to ecu. I should get mine replaced on monday, i will let you know it that fixed the problem.
Car is boosting at 14psi, the ticking noise has been there when i got the car. As long as the RPM, it exists at every level. And, i havent figured out what the fuel trim is. I really want to take it to a DSM specialized shop to take care of the car, but unfornately couldnt find one in local...
Haven't got the fuel trim fixed and here comes another problem. I'd never noticed the ticking sound until last night. Here's story, everytime i leave my foot off the gas paddle i hear the ticking, it goes faster and faster then slows down until i step on the gas again. I left the car idled...
Hey guys! I posted this earlier but no one had an answer for me, so im relisting it. The car's having the light on for the past few weeks, i tried to clear out the code by disconecting the battery on and off and it erased code for only couple days then it came back on. Please, any suggestions??
Im having the same problem took it to the local shop, they changed spark plugs, wires and checked for some other stuff but nothing had solve the problem. Im still looking for solution.
Had check engine light on today, i went to auto zone they did a diagnose and the code come out to be fuel trim mal functional, which the guy works at auto zone said had never seem one like it before. Also, the car has realllllllllllllly bad gas mileage, about 15m/g on highway, and the mods i...
Hi, my valve cover has a crack and whenever i rev up the engine the oil will shoot out and spread to the whole engine bay. Then i bought a valve cover from ebay with powdercoated it has the same problem, so i gave up on buying used. I searched all over the internet couldnt find one company...