Yes I definitely would bench bleed it. Get as much out as you can before installing on car.
It helps with bleeding the air out of the system. And can make life easier for sure!
I have had the same issue recently with masters for first generation Dsm weather it’s 1g or galant. For some reason you have to reuse on the old plastic fittings.
I love seen the progress yous are making on it.
Keep up the good work!!!
I hate to do this. But I got chance to by another galant that is local to me. That I have wanted to buy for the past 10 years or more. I don’t want it to slip away this time.
Car has All new pads rotors and calipers all the way around.
Has new master cylinder and non abs prop valve from JNZ...
Got the carpet out of car today. And also go the other seat out and center console out to see what I am working with.
Carpet I’ll take to work and steam cleaning it this week one day see how it come out to know if I need one.
Still got find seats for car and all.
Got figure out if I wanna keep...
I have only seen seats like that in old muscle cars that have sat forever in junkyards.
I’d like to try find a good stock interior for car. Unless if I get price to get leather redone on these seats.Supposedly theirs and evo8 up in Harry’s u pull it in hazleton. I might go check out. See if...
Got the car today to my house to start working on it.
Started taking seats out of car.
Passenger seat is rotted badly.
Had to heat all the bolts with my mini inductor. To get them to come free.
Rear back seat kept falling apart when I touched it.
Also got rear arms torn out today to install
New...
Got my steering column installed today. Key and everything works now. For the ignition system.
Now just got get some to rekey the lock cylinder so it will match the rest of locks on car.
Man I might have to come check this other car out. I need some stuff for my galant. If you’re willing to part with some stuff from them.
Awesome find by the way. I been looking for another shell my self for parts
Last night I made trip to @DSSA compound.
To pick me up complete steering column for the galant with key.
And got driver side lower dash panel for it also.
Man do’s Josh have some nice Mitsubishi laying around the shop.
Now on Sunday I’ll get this installed in the galant. And drive it 2...
I have snap on. OTC and Proto Brands. Some I bought used or at flea markets.
Press plates I just use the ones that came with my aff press setup
I have in my garage.
Went over today to work on galant at work.
Put my 780s out of my eclipse into
The galant.
Definitely fired up and ran better than.
But found this Layin in engine bad. Not sure what it is or what it goes to.
Found spot on upper intercooler where it might go for I guess old school air temp...
I removed my injectors the other day. To get them cleaned and checked. But when I got them out they were all bent up top a little. Like installed wrong at some point or whatever they were in before caused it. Now I don’t know what to do. I look for new injectors or some decent used ones to get...
That’s my old new stock shep built trans. That I sold rob fig couple months ago.
Got tired of it laying in my attic. And knew I was never going to swap my low mileage gst to gsx ever. I asked Rob first if he wanted it. I am like hour from him.
Small world. I live in Lehigh valley area also. I have couple buddy’s who still have Dsm but they are garage queens don’t see road to often.
Be nice to meet up sometime
I know exactly what you mean. I can relate 100 percent
My daily driver is buick rendezvous 4 door small suv. That everyone fits in with no issue and I can still tow trailer with it. Not sporty at all. But runs dam good for the old 3.4 v6
I
I hope All the a/c stuff is good. Stuff is hard enough to find for galantThen I can still keep my GSX as my fun toy to drive around.
4doors are nice to have for sure.
It actually has and old road race engineering intercooler setup and piping from them on car.Yes ac is all intact. Going to check it for charge. If no charge in it. Going to put some oil in compressor. The. Recharge system at work for sure.My goal is to do all maintenance work on it. Change...
It actually has And old road race engineering intercooler setup on it and all.Yes jt has ac. I plan on tryin to for sure. It’s all there. Nothing is missing under hood.
Still has cruise control and abs.
Abs I will delete. Thanks to @DSSA for getting me one of the last non abs prop valves.My...
Got it car in shop today. Put some tires on it quick I had laying around.
Change oil in car and filter.
Pulled injectors out to give to my local guy to clean them up for me. He’s big Dsm guy said get them over to him asap. Lol
Just got get some fluid for trans and t-case rear diff.
To change...
I cranked it over last night. Has compression. Seemed like no spark.
I do have video scope
These are pictures from his post
From Facebook.Said he was going to pull engine sell engine and trans separate. Then sell parts from shell and scrap.
has video of it running.
Transmission looks new. Can tell looking at cylinder head it Dosent look bad. No road grim on car or anything. Once registered in flordia also. Going down Sunday. To make deal with guy. Going to pop valve cover over and look inside quick.
Tons of parts in trunk. Just can’t get it open. Stuck shut
The exhaust side on turbo is Dsm 4 bolt flange. I can definitely say that. Turbo isn’t what is on sheet.
The car was abandon then.
I got police report this morning from
My local guys. Not stolen or anything was impounded at the place that’s selling it.
Guy has no idea about car. Just says it...
Went and looked at galant last night that was posted forsale on Facebook.
My buddy got a hold of guy because I don’t have Facebook. I called the guy.
Set up time to go look at car last night.
Down in south Trenton New Jersey.
Boy did that feel sketchy as sh*t. Dudes waking up drinking beers hole...
Decide to on Sunday. Tackle the wiring with removing the abs from
System. Had to d-pin the one connector up front to keep
The right rear speaker working. And the automatic seatbelts to work. And the door ajar switch working.
I have good abs complete harness if anyone needs one for car.
Decided...
I know nowadays. They want repair bill or receipt from buying a new one. Or some paperwork to prove why vehicle is getting a new one or why removing.
I know CA and NY are the worst. The paper trail you have to have is crazy anymore.
I know my guy that owns scrap yard. Hasn’t had any issue yet...
Got the suspension finished on Sunday.
Installed new kyb agx shocks on car. Got find some new lower springs. Anyone have any good recommendations for lowering springs.
Installed the oem wheels. I love the look.Got package from @DSSA yesterday
Got some bolts and nuts I needed
And also got...
Yea they are cheap tires. Not tire I would buy if it was my daily driver. I don’t think they would last long. Just because they feel like soft compound. Problay be good for like 20,000 miles I would guess.
Mounted up my mint gsx wheels I found. On some cheap tires I picked up from my local tire dealer. Not greatest of tires but they are new and will work for now.
Had some time this morning at work. To mount up my mint wheels I found.
I bought some cheap tires from local tire dealer. Not the greatest but for 165 bucks for 4 new tires they will work for now.
And at least I can get them on car.
I would have put back in for now. Just to drive the car couple times and Put about 100 miles on it and drop fluid out of trans and inspected it then. For metal and all. If it looks bad then. Pull it back out and just keep searching for used trans or rebuilt one someone has Laying around.
Did you ever think of looking for 2g manual trans. And get boosted fab 2g manual into 1g chassis bracket.
I am glad your not giving up on car. I saw the post forsale. And was like he can’t sell this yet.
Save some money and just keep collecting parts for it.
Project cars for this reason...
Went junkyard today for Subaru piece I need. Out of the corner of my eye spot this sitting in my local pull it yard first one I seen in years 1993 Eagle talon.