The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support Morrison Fabrication

Search results for query: *

  1. Push Button Start (merged 11.07)

    well here's what i think, you could wire up the acc, acc1, an on, to relays, the unlock output from an alarm or a keyless entry would activate the relays, and when you hit the lock button it deactivates the relays.
  2. turbo manufacturers

    well i just saw that jcwhitney has one too, http://www.jcwhitney.com/autoparts/ProductBrowse/refId-20004634/showCustom-0/Pr-p_Product.CATENTRY_ID:2011214/c-10114/p-2011214/N-10114+111+4294965618+1995+20004634/tf-Browse/s-10101 what do you guys think?
  3. turbo manufacturers

    well as i can't post in the turbo section of the 420A subforum i figured i'd post it here, i finally got my turbo budget complete so i started looking at my options, i'm leaning towards the greddy kit but overboost.com looks like it went down, the star kit i can't find anywhere, the hahn kit i...
  4. hot wire rad and condeser fans

    i'll get a pic when i can, you know what they say a picture is worth a thousand words
  5. hot wire rad and condeser fans

    i have ALLDATA (it's an automotive shop repair software) that's where i found 3rd qauarter 2004 so it has all the cars made from 2004 and back, and my rad fan is not original it went bad about 6k miles ago, i replaced it with a slim-fan that could be it i don't know, all i know is that it fixed...
  6. hot wire rad and condeser fans

    thanx for the info luv2ralley, as it turns out i didn't have to do anything to the high rad relay, because the high rad relay turns on both fans automatically, so i wired the low rad relay signal to the low cond signal, that way if the ECU needs more cooling than 2 fans it can activate the high...
  7. hot wire rad and condeser fans

    before anyone tells me to do a search or goto vfaq, i did i went to vfaq and i printed the article to toggle switch both fans and i did a search on here too BUT all i could find is how to do it on the turbo version i have an NT, so my question is i have hi and low relays for both rad and...
  8. 420A to 4G63t conversion again.

    not the SRT the 4G63
  9. 420A to 4G63t conversion again.

    yea i've been thinking about starting with a bigger powertrain, but i'm not sure yet, the only thing that has held me back from picking up the engine from work and putitng it in is the fact that it'll only have around 210-220hp after all is said and done, when my last car came stock with 260hp...
  10. 420A to 4G63t conversion again.

    yea good idea i was just thinking about fabing up my own, but it's easier to just goto a junkyrad and get them, thanks
  11. 420A to 4G63t conversion again.

    i have a tranny from a N/T right now the one that's in the car but i don't know if the bolt pattern is the same, do you know where i can get some pics of the bolt pattern from the 3 trannys?i would BUT i live in florida, i think that about sums it up, plus i'm doing it with my friend who's...
  12. 420A to 4G63t conversion again.

    ok let me start by saying this:1. if you are going to post anything like " it's not worth it", "don't bother", or "sell it and buy as GSt" then i recomend you don't, because i don't give a damn what anyone says i'm still going to do it, plus my other thread got closed because that's all...
  13. strange spooling sound

    i didn't mean it as an insult it was just a reference, it started after i replaced the PS/AC belt and the bearing in the tensioner pulley, but i don't know if it's the belt or the bearing, if it's just normal or not.
  14. strange spooling sound

    when i rev up my engine i heard what sounds exactly like a turbo spooling at 3k rpms it gets louder, and NO i don't have a turbo it's a 420A. anyone know what it could be??
  15. 420A to 4G63t conversion

    and some people can't read to well, because i did say that it was the second time my ecu fried, because the first time i bought a $150 ecu,oh and actually with my discount the gaskets and belts were only $9.56 so that kinda defies your theory. and were did you see an ECU for $100??
  16. 420A to 4G63t conversion

    WTH?? when did i use bad grammar?
  17. 420A to 4G63t conversion

    and now you see why i hadn't replied, i don't really care what other people say, if i want to do it i'm going to do it, and like i said before to me it's more enjoyable to build up my car than to buy it made, don't go nuts that's only MY opinion, and after yesterday i'm defenetly getting rid of...
  18. 420A to 4G63t conversion

    first of all thanks for the info guys, now on to bussines i'm doing it with my friend i work as a mechanic at an auto shop and he's a heavy machinery mechanic for the county, so if it comes to tools or equipment we won't have a problem, as for the engine, were still deciding if to buy a beat up...
  19. 420A to 4G63t conversion

    i'm in the process of swaping the 420A in my GS to a 4G63t, but i have a couple qustions, i know my 420A trann will not does anyone know the number for one that will fit?? and will the 420A harness and ecu work on the 4G63t?
  20. link to test IAC

    thanks the first one is exactly what i was looking for, you can find yourself with some rep points as soon as i figure out how to give you some.
  21. link to test IAC

    i'm in the process of getting a new ECU and i want to check that my iac is working properly, i'm looking for the link that tells you how to check that your iac works properly, and what the resistance should be at each pin, i looked through vfaq but i couldn't find it, does anyonme remeber it??
  22. ECU making strange noises

    what i meant is that when you keep a large amount of electricity stored in a small capacitor it'll create a high pitched whine, i tought the noise was just the ECU holding power for the windows or anything it needed it for.it's an N/T unfortunatly:toobad: , so the ECU is under the hood, but...
  23. wiper blades stuck

    before you call me stupid, i'm trying to remove the whole wiper arm not just the blade, i want to take them off to paint them because their faded, when i remove the nut ontop of the arm it just won't come off, i can pull on but it just stays is there, is there more than one bolt or pin or...
  24. ECU making strange noises

    well the clicking is normal in some ECU because they have internal relays, but mine is more of a electrical whine
  25. ECU making strange noises

    i had the ECU replaced a couple months ago because my IAC went bad and it took the ECU with it, so i replaced the ECU and IAC but now when i turn the key to the on position the ECU makes a high-pitched whine, even with the car off and the key out it'll continue to whine for about 30 secs, i...
  26. Engine cut out during heavy throttle, idle ok

    a problem with the cam sensor would feel like temporarily loosing spark, if you want to be sure hook it up to a scanner and have someone else look at the scanner while you drive the car, drive it hard then normal then hard then normal sooner or later it should fail and the scanner will say no...
  27. how to tell if you knock sensor is working

    why do you think your cracnk sensor is bad? are you getting intermittent power loss under 50%+ throttle? if you are it could be the cam or crank sensor, if the sensor is completly gone the car wouldn't start, this happened to me but it was the cam sensor, first i started getting intermittent...
  28. dvd flip up pocket logger

    check out www.mp3car.com
  29. Engine cut out during heavy throttle, idle ok

    in an N/T with a 420A engine is in the egine bay next to the air filter on the driver side in tubo charged it's behind the radio, when this happened to me my camshaft sensor went bad and then it threw me a code, you might want to check your cam and crank sensors before replacing the ECU.
  30. what would cause fast oil contamination??

    i put the lucas stabalizer on it because the egine has a really slow oil leak about 1/2 qrt a month, i haven't been able to find where's it's coming from so i added the lucas to stop the leak (which it did) i think it's coming from the head gasket but i can't tell for sure so i'm going to add...
  31. what would cause fast oil contamination??

    no burning oil, but i don't know how to check if i'm running rich, i don't have an A/F gauge.
  32. what would cause fast oil contamination??

    this afternoon before i left for school i checked my oil and it was tea colored, now it's coca cola black?? wth? the round trip from here to my school is about 130mi but that wouldn't be enough to contaminate the oil that much right?? o yea and i added a bottle of lucas oil stabalizer and lucas...
  33. Diagnostic scan on 2g? [Merged 8-8] OBD II OBDII OBD2 OBD 2 port location where

    on mine it's right next to the OBD port but then again i have an N/T so i don't know if the turbos have them, here's a pic.PS: ALLDATA says the port should be right next to the obd port like in the pic.
  34. Simple OBD question (pics inside)

    i'm looking to buy a datalogger and i have an early built 2G, my car has a data link port AND a 16-pin OBD port, so my question, is my car obd-II compliant or is it obd-hybrid?? the production date is 11/94, the problem is that i don't know which scanner i should get the 1G or the OBD-II? here's...
  35. i need some input on new clutch

    it's time for me to get a new cluch, this being my first DSM i have no idea what's a good clutch or what's bad, i'm not looking for crazy 24/7 track performance, just a dialy driver and the occasional track, what do you guys recommend as a good clutch??PS: i know there is a drivetrain...
  36. Engine cut out during heavy throttle, idle ok

    i suspected it but i wasn't sure, good luck tho i just got my new one today, putting it in tomorrow
  37. How can i manually move the pistons?

    you might want to take out the plugs too, it'll make it easier so you don't have to do the compression stroke manually.
  38. Engine cut out during heavy throttle, idle ok

    well i had the same problem about a week before my ECU went to hell when i had throttle about 60-70%+ it would loose power just as if i had been loosing spark, then a couple days after my ECU died.
  39. Engine cut out during heavy throttle, idle ok

    did you by any chance check your fuel filter?? it could be clogged, we get car all the time that'll idle fine but when you give them gas they hesitate or stall, we found out that the fuel filter was so clogged that when the pressure increased it would completly cut out.
  40. Push Button Start (merged 11.07)

    i know someone who wired up his jeep to start without keys, the removed the ingition lock and rewired the car, he has and ingnition button BUT he made his own system to enable ign1, ign2,and the acc just having a keycard or a remote anywhere on you, like corvettes and high end cars do, but his...
  41. the car starts??

    man this car was built ass backwards, i 'll test the switch and relay with my multimeter and let you guys know wth is going on.
  42. Wheel lock key broke, broken, lost, etc. [Merged 8-6] stud nut lug key

    this happend to me when i first bought the car i asked the guy for the lug key and he said it was in the center console i saw it but i didn't realize it was the wrong one, it's a good thing i work at a mechanics shop and we had the speacial tool to take it off, so here's what you do you can buy...
  43. the car starts??

    i have a 5 speed 95 GS and the car is not supposed to start if the clutch is not pressed but the thing is that it does, so i went and checked the clutch switch and it is plugged in so what the hell?? here's a pic
  44. Program the remote control in the visor? [Homelink home link]

    did you press the "new remote" button behind the garage door opener while holding down the open button on the sunvisor?
  45. what datalogger should i get??

    ok so let me ask you guys this, i called the local misubishi dealer and they told me the production date of my car was nov 5, 1994 but the is a 2G?? so i don't know if i should get the OBD-II or the 1G datalogger?? Pics (don't mind the minor scratches and the untouched engine, i've fixed a...
  46. Which caliper pinis locking/guide

    i don't mean to get off topic but the guy that i bought the car off stripped one of the bolts so i need a new one, how much did napa have them for?? i called the dealer and they said $12 for only one.
  47. what datalogger should i get??

    funny now i understand the really vague post, you were being sarcastic.
  48. what datalogger should i get??

    before i say anything i tried the search but i couldn't come up with any concusive, i know there's a engine tunning/datalogger forum but i can't post there yet so onto bussines, i have a 95 GS N/T (YET) and i'm looking for a data logger, the basics see how my engine is doing and check codes...
  49. REM/electrical problems please help

    check the fuse on the amp, the amp has a fuse near to where you plug the power wire to, if not just go buy a cheap $17 volt meter from walmart and check the connections using the amps ground, touch the negative probe to the ground on the amp and the positive to the thick power wire and you...
  50. Blue LEDs in the gauges finished

    damn that look great, i've seen another guy that this but he did the a/c controls too.PS: i think you might be overheating a little bit LOL
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top