Canada has different rules for cars and I believe that the canadian version does have daytime running lights.As for the original post. Good luck. You are trying to find a country specific part. You might give DSMGraveyard a call.d

The head came from my previous 6bolt w/ 2g head before my crank shaft bearings seized from lack of oil after 1500 gentle break in miles. Luckily, it didn't bend any valves. Once I get timing done properly, I'm going to grab my pancake, get a good pressure valve, and test the pressure across...

I appreciate everyone's feedback.No plugs inI'm not quite following you on this. Are you talking about the pulley on the tension arm? I'm following this:"So, spin the engine 6 times (watch the dowel pin, it should start at 12o'clock and do 6 FULL revolutions to 12 o'clock again...

I've never timed this engine before and got it back with the wrong parts from the builder. I took off the motor mount (had a 1g) and replaced all timing components. I'm following blcknspooln's write up...

Congratulations. Sounds like good karma to you. Be sure to spread it around. As for the OS "spontaneously" fixing. If you had a corrupt partition table, you might have fixed it. It's odd and you got lucky with that. I want to see pics of your 2k find. What a bonus to go from a GST to a...

^^^^^Beat me to it.

Did you look in the exhaust to see if they installed one of those fake turbos? I imagine someone could even go so far as to install a bov on the piping to the throttle body with a weak spring so they could get the spool from the exhaust and the whoosh when they let off the gas quickly. It's...

He posted that in 2007. It's a good chance that the group buy is no longer available. That page is not available to anyone either.d

Would you consider selling the specs to punishment racing or some other vendor that does good welding so we can purchase this? Could even name it after you. I'd love to see some compound setups working their way through the scca and misc other road racing divisions.d

I've got the circuit diagram for the 1G in pdf form if you need. I looked through it and it only looks like you need to worry about grabbing the 30A relay on the main block under the hood to get it to work. There is a 10A for the ignition that is involved but you should have that already. As...

I used to own a 3 door Saturn SC2 and thought it was a great idea. I can see this being something actually useful. You would need to brace the frame along the roof and floor. In my old SC2, it was perfect for sliding something in to the back seat or a drunken friend.

I agree with this comment. I thought the discussion revolved around music and not data in general. I "burn" my music but I "backup" my data. I would never trust my important information to CD or DVD. I backup all of my data to secondary and tertiary drives because I can do that on the fly...

Maurice beat me to it. RRE's Larson Silicone Hose Kit

I loved doing it while in college. I made minimum wage plus tips and trip charge. No mileage. I would get 4 - 6 deliveries in the same basic area when busy and just 1 - 3 when not. Lunch time was easy money but not all businesses would tip you to the cost of what they ordered. The bonus to...

My guess is that they are old school. In 2001, there were issues with people who were trying to rip a CD at high speeds and by slowing down the rip speed, the MP3 did not have any errors. I just rip mine at 256 straight from WMP and haven't had any issues. Of course, YMMV depending upon your...

Somebody may have been following part of the taboo guide: DSM 1G/2G Vacuum Line Removal - Mitsubishi Forum - Mitsubishi Enthusiast Forumsd

Picture Time:

I actually liked the vibrations with a BSEK and poly mounts. It felt like the 60's muscle cars I used to mess around with in highschool.d

Good luck. They are expensive and Kevin quoted me about 2 weeks from order to get it done. Give yourself some padding in time for it.d

But it works and it's what I have. Shifted perfectly and no issues.d

Had the same issue. My solution for the transmission: http://www.dsmtuners.com/forums/automatic-tranny/378625-stuck-passenger-side-axle-2g-awd.htmlAs for getting it out of the hub, I'm tempted to just buy a new set of spindles, axles, rotors and call it a day. It's old, rusted and seized...

Pulling back from the wayback machine (aka memory). Greg Collier: http://www.dsmtuners.com/forums/road-course-autocross/210879-getting-ready-2006-race-season-4.htmlHe starts the discussion on page 3 but it goes on for a while. It worked well for him.Here is a pic of the ducting he did...

This must be why my 6 bolt from KarKing is all wonky. They are using 6bolt blocks from hyundai for their builds. It allows them to run a 2G crank sensor but you need a goofy Oil Filter Housing. The one they give you does not have a provision for an idiot light but the pressure sensor does...

How about a COP plate with removable inserts so we can run it as a spark plug cover and when ready, remove the inserts and convert to COP? I think many people would like a one time purchase instead of buying a SPC and later on down the road, swapping it for a new cover.d

I'm not sure what the plugging the water channels is. That was a new one for me. As for the port the oil galley: http://www.dsmtuners.com/forums/newbie-forum/341028-4g63t-head-oil-port-mod.htmld

I'm currently working on this. I had a 6bolt with a 2g head purchased from KarKing that seized on me. I'm putting my head on to a 6 bolt turbo block and figuring out what is wrong while I go through it. According to the machine shop, they said everything swapped over fine except for my crank...

Not sure if this is what you are wanting:Productsd

My current block would require machining and the new block already has high compression pistons installed and ready to go. I'd rather have the new block with oil squirters than keep my old block, bore it out .02 over, and hone the cylinders.My 2G head is already machined for a 6 bolt...

I took a look at the issue on Friday when I got home early and it appears that my old block is an NA 6 bolt (no oil squirters) and the new block I'm buying and adding my head to is a turbo 6 bolt (oil squirters). Whatever they hodged podged together for my engine is not standard for DSM builds...

Much appreciated. I think between the kiggly information and the RRE information you posted, I know enough now to talk to the mechanic. I'm getting worried about him. I think I'll try and leave work early today and have some face to face time.d

Could someone explain how a crank trigger works and how it mates to a 7 bolt but a 6bolt doesn't use one?Here is the issue. I have a 6bolt with a 2g head that I fried and I bought a 6bolt block (checked) with a 1G head from a local shop. I'm having them swap all of my parts from my old...

Well, as mentioned, it's a reliable car. Just know that you'll probably have it for quite a long time and everytime you get in it, you'll think of your friend. I think a 1.8 is the gift that keeps on giving. Just enjoy your DSM, put a small pic of them on the rearview mirror and keep up the...

I'd assume it's for weight distribution.d

I was tempted to chime in on this but I noticed he has an N/T and I'm not fluent with that car. Are people making suggestions based upon this knowledge?d

I saw this on RRE site a while ago. Does this help?d

I had the same issue. Here is my thread on it: http://www.dsmtuners.com/forums/automatic-tranny/378625-stuck-passenger-side-axle-2g-awd.htmlIt was just an odd angle to get it out. I don't know if it was just removing the transmission from the block or what. Once I got a good angle on it...

In fact, many shops don't turn rotors anymore. The intermittent scraping sound is exactly what I've heard in the few times I've had warped rotors (breaking too hard on cheap autozone or factory rotors). BTW, my wife drives our automatic jeep with 2 feet and warps rotors from time to time. I...

Sounds like a warped rotor to me.d

Power requirements? Or 2TB Greens for $120. FreeNAS does not take much for processing power. There are 10G nics that are in this price range. That's why I suggested FreeNAS again. It's iSCSI. I'll explain in case you don't understand. SCSI connections are direct attached storage. This...

Just the enclosure to hold 10 drives will cost you in the neighborhood of $600. Then each drive is about $100 each ($60 for a deal for a WD Green). We are talking about $1200 for a heck of an enclosure with storage with a 1 meter distance.edit: Honestly, I would just buy the esata...

Is this for show only? Do you worry about air catching the hood and pulling it off?d

Well, let's start from the beginning. What are you putting on this and why such a large performance? PM me privately if you want. I'm the NAS/SAN storage architect at my work so I should be able to help you size something appropriately for your needs and within a budget. It sounds like you...

I like the work that punishment has done. Much better than it was. It still has a few glitches, but it's easy to navigate. I also like AMS alot. I still refer to roadrace for information, just wish we could just wiki the thing and have them rebuild it.d

I can't say about the SRT4 but Top Gear did an episode recently comparing the 350z, audi tt, and the chrysler crossfire. The general consensus was that the 350z was just "fun to drive". The engine was more than accurate for feeling fast, it was rwd and fun to go through the corners, and was...

Haggle the other guy down to 800 and buy them both. You'll need a parts car and between the 2, you should have 1 good car. You can part out the misc items you don't need, make back most of your money and have 1 good running car with a frame you are donating to the junk yard.d

1. Remove Stripe. 2. Buy large amounts of carbon fiber 3. Panda car with carbon fiber 4. Awesomeness ensues and women flock to your car rubbing it clean with their breasts.d

You'll notice that they force air to the center. If they followed the body lines, it would bring in air, but diffuse it. This concentrates it to the middle. I believe this is correct.d

He did survive. Guy on digg said the kid was ejected from the car and came to a stop in front of his car. Kid is in critical condition but alive. Digg changed today so I can't find it. In any case, stupid lucky kid.d

Sorry to hear that. On another note, that doesn't look like the radiator/fmic that was on it when it was the flying banana. Did you change it out or did he not sell it to you?d

Thank you for the advice.d