Hey all I was curious as to your thoughts on whats wrong it's not my car. There is a 89 dodge colt 1.5l auto that was running fine for ever (no recent issues) and just quit on the interstate. Got it to the house and it set for a couple days then was started and it ran for about 5 minutes and...

Going too bee doin a car build useing only eBay parts (parts made by eBay) I'll start a blog as well. Just thought I'd see if anyone would like two sea any certain parts tried out. Let me no and I'll put them on my list to buy and try out and report back. Your welcome to suggest exact parts or...

Anyone know the power steering pumps well enough to let me know if I can take a 2g pump and install it on a 1g with relative ease? Or what it would take? Thanks, Keith.

Hey all! First I am sure this has been done but I am doing it again. Also for the haters out there, please please don't waste forum space by posting things like "your car will blow up" etc. With that said I am going to build a car using ONLY eBay parts.I have a 91 eclipse 2.0l non turbo...

Where can I get one? eBay shows lost of different ones. This is for my n/t to turbo swap so would one of those $30.00 ones work? Thanks.

Hey all. My 91 2.0l n/t auto cruise control is not working. The switch indicator turns orange when turned on and when I push the button the green light on the dash comes on but it doesn't hold any speed. The only vacuum line I see is connected. My throttle cable is loose and I did tighten it but...

Hey all I picked up a 91 n/t auto 2.0 a couple weeks ago. I'm currently trying to get all the minor things fixed and I have some questions about them. The coolant boils but the car doesn't show it's over heating. I haven't hooked up my logger to it yet but will soon. That's not that big a deal I...

Hey all, I have just bought a 91 n/t 2.0l automatic car that a transmission shop told me the transmission is going to need rebuilt. I was wondering what other cars besides e/t/l that a auto transmission from will work? Only one junk yard has a eclipse and it's auto but a 1.8l. Will the 1.8l...

Just picked up a 91 n/t auto. I have a exhaust manifold, 14b oil feed and drain lines, oil pan and possibly a 91 gst manual ecu. I know I'll have to pick up some 440cc injectors and a pump. My questions are this: 1. Will a healthy n/t motor handle a 14b with a vacuum line ran from the j-pipe...

Ok I'm going to do a led project. I know mcd is brightness but don't have a reference to how bright an mcd rating actually is. I need them to be bright, very bright. I'm currently looking at 285,000 mcd. I'm kinda wanting headlight bright or at least the Audi led bright. Any help would be...

Car: eagle summit hatch w/4g63 swap. Tranny: 4 speed cable clutch. Ok so it is possible that I used the wrong flywheel in the swap and my question is this. With the tranny bolted to the block in the car with no fluid in it. How should the clutch pedal feel? Normal? Also is there a way to...

Just wondering if someone can ballpark the flow on my .48 a/r 50 trim? Motors apart trying to make cam/IM decisions. I had it planned out with a e316g but got this turbo from a buddy instead for cheap. Like what is or should it flow in lbs.?

Is there a cheap(cost only) place to buy a timing belt tensioner??? What about eBay ones? Are they all around $80.00?

Hey everyone, I need to know the opened and closed seat pressure and the installed height of the stock valve springs on a 1g 6-bolt turbo please. I just need to make sure they are within factory spec so i dont have to purchase new ones. Also is there something else besides that i should have...

Hey all was just hoping someone could help me out with the thread size on a couple things. My cylinder head has a fuel rail bolt broke off in the head so my friend is going to hela coil it and the exhaust manifold holes because they are all messed up. I'm nor by my car so I can't get the thread...

Hey just wondering if anyone has an account over there that would mind sending a moderator a message for me please? I changed my email to my current email days ago and it will not let me log in anymore until a moderator confirms my account. Thanks anyone for the help, Keith. My account name over...

Hey all I found a 91 n/t eclipse with a auto transmission in it. They want $800.00 for it and I was interested in getting it as a DD. The problem with it is the auto transmission. What it is doing is acting like it is going from drive to neutral and back into drive when sitting still and it...

Hey I need a 90 ignition control module so I am wondering if anyone knows what other model cars they would come on? I have like 3 91+ modules and there are no junk yards with a dsm in them....imagine that...lol. So I am guessing that just about any 90 model Mitsubishi should have one??? Any help...

OK don't pay any attention to what my car says it has on it right now.....it is completly stock, except for a walbro 255 and pump rewire. Here is my question/concern. Would the pump make it have around 15-16 in HG? I don't think it would but just to make sure I wanted you guys' expert...

Ok so here is what is happening. When I get on it, anything past 10 psi and it starts stumbling pretty bad. I can let off the gas and then get back into it and sometimes it is fine and sometimes it keeps messing up. My current mods list is a little off because I had to strip everything for a...

Ok just double checking here. I found my answer on here by SEARCHING...lol. The turbo oil feed line for the stock 2g T25 is what we are talking about. The thread pitch coming out of the oil filter housing IS.... 3/8"? I need someone to comfirm that please..actually a few people to confirm. I...

Just curious, does anybody elses leak down your hood and leave white streaks as they dry? This really sucks and if you have and idea on why mine are doing it or how to fix it I would apprieciate it. Thanks in advance, Keith. :dsm:

Does anyone have any info on the GSX galant? How easy or hard would it be to turbo it? Would it be as easy as bolting a turbo on and changing the injectors and ECU or would there be more stuff involved? Let me know please guys. Thank you. :thumb:

Ok someone please tell me again where every spot on our car that oil can get into the water. I have been through this and been through this with my car. It is under warranty and the first time it did this they replaced the oil filter housing and it still did it so they replaced the T25 and it...

Does anyone have a stock upper intercooler pipe that they do not want? I have to take my car in for warranty and need to put my side mount intercooler back on and that is the only piece that I am missing. ANY help would be apprieciated. Thanks and let me know, Keith. :dsm:

What are you guys using for oil feed and return lines on the Holset HY35's? I guess what I want to know is what the fitting sizes is if anyone knows so that I can just make one at a local shop for about $25.00. If anyone knows or knows where I can just buy the feed and return let me know...

Ok I am getting oil in my water AGAIN! The first time the T25 went out and since the car is still under warranty they replaced it and the oil filter housing first. So I now have a new oil filter housing and a T25. It was fine for a month or so and now it is doing it again. I replaced the T25...

Ok I picked up this Holset and it doesn't have a data plate. It is much larger than my HX35. Is this a 50, 55? If someone knows please let me know. If you have the or know how much cfm or anything about this turbo let me know please. I am looking for something that will flow like the Forced...

Ok one of my motors had the shear pin broken in it and last night I fixed it. It now opens and closes perfectly except when it gets almost ALL the way down except for a few inches and then it pops down into place. Any ideas on what is happening or better what is causing this so that I can fix...

I replaced the fuel pump with a Walbro 255 from my 1g that I used to have. The car now after sitting for awhile will crank and crank but not start. I can then stop and try to start it again and it starts right up. It runs fine after that and no problems until it sits for awhile. It did not do...

I am fixing to rewire my fuel pump with 10 gauge wire and was wondering if I could use the 10 gauge wire to rewire the fuel pump and run a very small amp? Will this affect the voltage to the fuel pump at all? Has anyone done this? What results have you had. Thanks in advance, Keith. :dsm:

Hey I am about to do a coolant pressure test to check and see if there are any leaks in my coolant system. What do I pressurize the system to? I am at work and do not have my manual with me so I have no idea. Thanks, Keith.

What size injectors do you guys suggest? I have the mods in my profile plus I am just waiting to install my tubular manifold, external wastegate, Holset HY35, full 3" exhaust and will get dsmchips to do my tune. I want to run a 190 lph so that I do not have to run a afpr. The car still has...

Just wondering if anyone knows what the stock disc is made of and what the ACT or other brands are made of? I guess what I am asking also is has anyone used a ACT 2600 with a stock disc and had good results? That is what I am wanting to do. Thanks, Keith. :dsm:

Hey I have a HY35 that I need to figure out what oil feed and return lines and fittings to use on a 2G. I will just bypass the water lines because the HY is oil cooled. I also have a HX35 that is going on a 1G motor car and need to figure out what fittings and lines to use on it as well. What do...

I was just wondering if you guys might be interested in buying ******** for aroound ****** each? It may be cheaper but I still have not finallized the price with *****. Anyone interested? I know that selling stuff in the Newbie section is a no no but I am not selling yet and was just wondering...

Does anyone know anything about this turbo? I was wanting to know the specs, airflow, capabilities, etc. Thanks in advance, Keith.

In this thread, post 3, I have some questions on some wiring. I would post them there but I am not allowed to, yet ;). I want to wire a dual stage boost controller using my manual boost controller and BCS. If I connect my acc wire leading to my BCS to the "on" side pin 5 and power(12v) to the...

Ok I looked through 62 of the 78 pages in the interior section and came up with nothing WTF . I searched through the forums. What switch is supposed to go underneath the hazard switch and the rear defogger switch? Is there one at all? Thank you guys! :thumb: :dsm:

Just curious, does any else's car rev up a little when your going after you press the clutch pedal in? I know I am not doing it myself. I just started noticing it after I installed my intake, FMIC, hard pipe and BOV. Any suggestions? It could have been there before but I didn't notice. When I am...

:dsm: I installed my ebay intake pipe and reused my K&N filter. Before I install it I did a boost leak test and fixed one on the FPR line and one on the BOV. Then the BOV (stock) leaked at very low pressure. I had no trouble before the intake and now the RPM's fall to rapidly when I am higher...

What K&N filter do you guys use? I have a 4" inlet K&N now that is round and long. It worked fine with my stock intake pipe but I just installed a intake and tried to use it but now it is to long. So I was thinking about this one. What do you guys think? I see the filters on some guys cars and...

What numbers have you guys put down with a T28 and what did you use to do it? Did you like the T28 or not? Thanks in advance guys. :)

OK I want to know, because I have searched through the dyno page and found numbers all over the place, if I use 550's, 190lph, FMIC, intake, 3" O2 housing, full 3" exhaust, and I believe it is DSM chips (not sure, it is going to cost me $385.00 delivered, programed w/eprom ecu), and a T28...

Does anyone know which BOV this guy has? :thumb:Link removed.

My car after it has been running for awhile with the ac on and some times not, will studder at idle but not consistently. It also doesn't do it all the time. The car does idle around 600. Any thoughts on what this is? I am stumped. The plugs are new and the wires look fine. :confused: :dsm: