Question: Are the 1g turbo vs non turbo and awd vs fwd pedal assemblies all interchangeable?TIAunior

Title states it my 1g oil filter housing has 3 allen head plugs. Two of them are right next to each other on the front of the housing. I just am not 100% sure which one is clean oil and which one is dirty?Can someone tell me top or bottom plug for clean oil?I did search to no avail...

So I have a garrett 50 trim i would like to install on my laser. I have a -4an oil feed line but the turbo seems to have pipe thread for the oil feed. So I would like to know where I can buy a 90 degree pipe thread to a size 4 37 degree flare fitting.... i can't seem to find this anywhere .. can...

Maybe you guys are better with the search function that myself. I know there was a thread a long time ago that had a long list of cars that use NGK BPR7ES spark plugs stock.I remember one was a 1981 Lambo CountacheDoes anyone have the link or id to this ol' thread?

Alright just installed a walbro 255. Now cranking it to start it....i have blown 2 ignition fuses so far....I don't quite understand this....is the fuel pump on the same circuit as teh 30A ignition fuse?

I have recently heard that people have been cracking blocks by hanging a heavy electrical sending unit off of the oil filter housing.....I am about to finish up an autometer electric oil pressure gauge installation.....wondering if anyone has heard of cracked blocks?

can anyone tell me if this is a non turbo or turbo ecu from this number?md166255thanks

Doing a trans job on a 90 awd...come across the 2 17mm bolts at the front of the right member (where it bolts to the front member)it seems very odd but it looks like part of the member itself is folded over top of the heads of the bolts? WTFis this normal? are you supposed to pry...

yup driving around - not even punching it and i noticed that the shifter felt all fubared towards 5th and reversecar drive fine home in 1-4th gear but there is resistance when going for 5thshift linkage looks finei also heard some clunking noises on the way homei have parked the...

title says it all

Hey guys just checking to see exactly what crossmembers i have to remove to get the motor low enough to pull the front shaft?Do i need to lower that gigantic front crossmember that runs east to west across the front of the car?TIA

hi,just wondering what the speical trick is to remove a stock 1g coil packi have already removed the 4 bolts that secure it and its loose but i can't seem to get it to completely clear the intake mani yet

questionI'm pulling a 1g a/t transfer casei just pried the tcase away from the trans - and i noticed the output shaft is coming along with itis this normal? any remedys if that shaft is not supposed to come with the tcase?

Sunday, March 13, 2005 9AM - ???? http://www.xoticmotorsports.comPrice is $40 for 4 pulls if you are 2wd. Price is $50 for 4 pulls if you are 4wd. Wideband O2 and Dyno Graphs are included in the price.Here is Xotic Motorsports Address so you can map-quest it.Xotic Motorsports...

was just talking to a friend about classic and antique plates the other dayin pennsylvania 15 year old cars can get classic plates which are emissions exemptthe car has to be all original looking on the exterior thoughmy 91 and 92 both look bone stock from the outside but they're...

alirght so this guy calls my newest car....92 laser rs awd a 15 sec turd on this local forum of ours - i respond with i think your confusing my laser with your g/f's wwd 2g pile (95 stock gst)he responds with this: :DLOL heres my car and mod list:1992 Laser RS AWD 5 spd lsd rear...

ok - so I'm buying this blown turbo (bearings shot) from some kid with a VW.he tells me its a t3/t4 - b cover .48 turbine housing a/rwhen i looked at the pictures everything seems fine except that the compressor wheel has fins that are grouped in pairs. now I have a new to4e 50 trim...

Click on the link in the message below. It's not spam or spyware or anything like that. A kid that has cancer wants his web site to reach 1,000,000 hits before he dies. I assure you there is no virus, spam, or anything on that link. If you find any, may the administrators ban me forthwith...

Ok, so I'm trying to remove a stubborn crank pulley bolt on a motor out of the car. A friend and I can't get it off, so we get a nice big breaker bar out and end up standing on it. Well the focker never does crack loose, it cracks.I guess the next thing I'm gonna try is getting a socket...

Ok so I buy this 50 trim turbo off of ebay.Well we I got the thing in the mail I took off the compressor cover and measured the inducera nd exducer. I got a measuremnt of 2" on the inner diameter and 2.75" outer. After looking in the turbonetics catalog it looks like this is a t3/t04b 5/6 -...

Ok heres the story:I bought a 91 TSi AWD with 90k miles on it with a snapped t belt. I knew the car would need but I only paid $400 for the thing so I bought it anyway.So I pulled the head and found some nice custom valve reliefs in the pistons - custom forged by all 16 valves :DNow...

look at my oil after 16g install and some idle timei thought it was frothed up from overfilling but this oil looks shittyis that coolant in my oil?is my turbo letting coolant in ?

question my car has been having some vacuum issues recently. Before I would get a solid 20 inches at idle no matter what. I was also always getting 25 inches or so under deceleration. Now I am getting random readings. Sometimes I get the normal vacuum at idle but I have seen readings as bad...

ok so i increased the boost on my car the other day to 15psi - its been up there before and ran fine. although, now if i punch it at 3krpm, when the revs hit just a little over 4krpm i get a huge lurch and jerk - its drastic it makes a lotta noise too - (probably the driveline begging for mercy)...

ok i know i posted this before once but here it goes again.i have a 95 tsi awd @ 99k miles with stock t25 turbo, supra smic, 1g bov, stock exhaust, and a homeade ball and spring type MBC.boost is set to 13lbs although at about 5krpms the boost fades off quickly and if i run the engine to the...

hmm i'm having this problem with boost falling off at higher rpms.i have done multiple intake leak tests. last night i did a test and found 2 things.1. huge leak at my supra smic where a clamp broke - fixed... 2. i can feel air leaking out through the valve cover breather? i checked my...

i just noticed a good bit of increased shifter movement left and right, front and back, in all gears.i am thinking its somewhere in the shift cables or maybe the shift plate and such?just wondered if anyone had any ideas before i tear apart my entire center console

ok heres a quick overview of my car - i have boost and a/f gauges, cone filter, supra smic, test pipe, 1g bovthose are the main performance modsi had the supra smic installed with my 2g bov for several monthes when all of the sudden out of nowhere my car starts fuel cutting like a mofo...

ok i bought my car only a month or 2 agoone day this car must have had a kickin' sound system in it or something cause theres all kinds of cables that head to the trunkbut when i bought the car most of the audio stuff had been stripped from iti know i had the infinity stock because there...

hi guys i'm having a problem with my high mount brake light fixture on my 95 talonwhen the brake is pressed all of the leds light up yet they light up REALLY dim - so dim that the mechanic at the garage thought they were completely deadi need this to work to pass inspectioni do know...

my newly aquired 95 tsi awd is making a squawking, clicking, weird noise when i start it. this happens everytime i start it. it also makes a high pitched noise when i start it and rev it a little when its cold. i read something somewhere about this possibly being an exhaust manifold gasket...