I know a proper sensor should cycle between .02 and I believe 1v but mine stays steady at 4.41. Would any thing cause it to read this high or is it simply no good and I'm thinking to much into this?

My car has an issue that once its up to operating temperature it will start to miss. Ive included 2 logs, one is it acting fine while the cruise is set, and the other it is acting up. It will miss/hesitate accelerating up to cruising speed at first as well. After I logged the bad cruise issue, I...

I would like some help identifying these cams. I'm a bit thrown off due to the "L" stamped on them. I see no known aftermarket markings, was told they were BC272s, but there are no stamps on the small ring saying BC0101 or BC101 only numbers on it are on the end opposite of the cam gears. More...

Was able to get some pictures taken of my talon and wanted to share them with everyone. Let me know what you think, thanks. Matt<img src="http://farm8.staticflickr.com/7208/6856471501_acdd0df169.jpg" width="500" height="375" alt="IMG_0808"></a> <img...

I'm looking to see if anyone has pictures of a white 1gb talon from shootout. It was at the amerihost inn. Only details I have is was white with black wheels with a red lip. Was bonestock looking even stock exhaust. It had a factory cd player 2g shift knob and a corded car phone haha. If anyone...

This only happens on start up, the light starts blinking then fades away as it warms up. At least that's what it seems like. Any insite to this, or comments or suggestions? This is on a completely stock 93 talon tsi awd 5 SPD

I recently did a boost leak test and found a leak in my fmic core its self.The problem is I can't see the leak. I know its coming between two bars and close to the end tank. The other post I found about a leak was to use an epoxy. Can you use any type of stop-leak or something of that nature to...

This is the auction I found it at just to give credit to the person selling this itemHas anyone ever seen a factory radio that looked like this one? I was browsing on ebay for white face gauges and found this. Now the item ships out of the UK so I was thinking perhaps this was a radio only...

I'm looking around trying to find a comfortable shoe to wear (not boot) for walking on concrete for 10hours a day 50+hours a week. I bought a pair of pumas with the air cell in the back in the first of July and I have worn those out already. Open to any suggestions running shoe walking shoe what...

Hey everyone, I am picking up a shell soon and I need to borrow some wheels with good tires( can give you a deposit) as thats all I need them for. And I've yet to see a dsm down here( southern atlanta, forest park ). If you can help me out I would appreciate it. I'm down here for work...

My wheel bearing, hub assembly, axle, upper ball joint are all either rusted together, or stuck (axle in the hub) does anyone know if the same parts from a fwd will fit on the awd. Now i know that the caliper and rotor are different sizes. But what I want to do it unbolt the control arms and try...

Hey guys, I am living down here for a few months and dont know anyone. If anyone is down here get at me so i can meet some new faces. I work at the Farmers Market exit at Bob's market/ strickland flowers. Town looks real exciting, and dont want to hangout by myself.Later Matt

Hello folks, i was just curious as to who else worked at circuit city besides me self? The news today was rather shitty since we will be shutting the doors and I have no idea where i'm going to work at. I went to school for bus. management and loved working at the store. This just really sucks...

I got some nasty vibration out of no where a while back in the car, so we decided to pull the motor and do alot of maintenance and upgrading. We found out quickly why the car vibrated so bad and it was because the intake mani developed cracks around the bolt holes. Sorry for crap pics but took...

Here are some pictures of our christmas tree. Me(spooln4fun), Adam(Wibblersnatch), and Jesse(theSickness)<a href="http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=56032609&albumID=2555247&imageID=41673017"><img...

Very first day I had this in feb/march of 2002A few months later I riced it outThen I sold it, and bought it back about a year later like thisAnd this is how it sits todayThinking about going back to the 2ga bumper....glad i got rid of my rice faze haha :talon:

I got a t28 with an internal gate. I am wanting to get rid of that and run an external gate, I know a new o2 housing is needed in order for this work, along with the wastegate. What will i need to do with the internal wastegate thats built on the turbo its self? Is this possible? or will i just...

The car was runnning really good a few days ago,,,but twice about ten minutes apart the car just up and shut off (everything turned off) luckily I was going down a hill both times pushed the clutch in, popped it started right back up and drove home. I go out to the garage a couple days later...

View Inventorylet me know what you all think? any views opinions or anything

Has anyone found a way to make the cruise control work on there car after swapping it from auto to manual? I am tired of not haveing after i had it for so long. Just curious if anyone has found this majistical answer yet.

Can you go to Home Depot Racing, and use the rubber grommets they provide? Mine came with a bad seal, and i made it even worse during the installation.I know the 5/8 rubber grommet works great for stock injectors Can I just get a larger one (that fits perfectly) for the aftermarket ones...

I just installed a walbro 190, 750cc injectors, and put my eprom in with dsmlink installed and set to 750 cc injectors. and new ngk plugs(bpr6es gapped at .28)I get a terrible stuttering problem, and hesitation during idle, and any type of throttleat first i was getting a cylinder...

I got this sweet ass sign from my girlfriend for christmas...finally got it over to the garage with the car. <a href="http://smg.photobucket.com/albums/v280/Jackash0413/Matts%20stuff/?action=view&current=Sweetohsign.jpg" target="_blank"><img...

I bought a fmic off a member here. The pipe that came with it is just absolute junk. has homemade rivets as a "bead" for the pipe to not blow off, and the bov flange is jb welded and leaks severly. HERE is the dilemma. Should I buy just new pipe as the core is very nice. OR This 95 96 97 98...

I am getting ready to wire my fans up so i have control of when they are on and off. i have the correct wiring diagram for the vehicle and know which wire is what on each fan. my question is can i hook them straight to the source. ground to ground, hot to hot with only an inline fuse or does a...

First off my thermostat housing has all new sensors(2) car starts drives fine......the rad. fan will not kick on what so ever. I have checked my thermostat, the relays, and fuses. Any onehave any insight on how to correct my fan from not turning on. OR does anyone know which wire on the fan is...

alright my ECT is bad, which in turns gives me trouble during cold starts. I am wondering if there is a "quick fix" as to turn on both fans by just turning on the a/c such as using a jump wire. or some sort of solution to turn on and off with the vehicle. until i get this fixed.if i unplug...

Got excited and made a wiring harness for the lights in the gauges in the A-pillar. Anyone like?

I just installed a motor in my 2g talon tsi. My question is on the crank sensor and cam angle sensor. which plugs in to which plug since they are both triangle plugs. and on the cam angle sensor which wires go from the sensor to the plug on the car (ex red to green, or blue to blue etc) my...

I recently swapped motors in my car(well installed one in a shell) the CAS on the motor had the plug torn off.....i noticed on the wiring harness for the car both plugs crank, and cas are triangle..would like to know which plugs to the crank......and for the cas what wires go to what? please...

Well my coil pack is fine we testd it out on another car, and i've got power to the coil pack, but i am getting no spark, i've got power but no spark on any wire. Would the transistor back be the next thign to replace/check? THe coil pack gets hot on one side and not the other when i try and...

Alright I searched and came up with this thread http://www.dsmtuners.com/forums/showthread.php?t=262336&highlight=coil+pack+hotthis is the same problem I am haveing. any idea where the MPI relay is on a 2g? have not looked or if someone else has another suggestion as to what my problem may...

Well I bought this motor, said came from a 95 eclipse. I know it will drop right in my 96 talon no problem. My problem is I dont know what all is missing off of it, as i have a shell with no motor to to get what i need off of it. The picture above looks like i am missing a CAS, and some...

I just had my headgasket replaced about a week ago, now today car my car started heating up, I got out to look hoping just a hose blew, but it is leaking from the back side around the throttle body, and transmission side of the block. Any ideas on what to check, could the block be cracked up...

I recently had my 96 Tsi broken in to. Well first the motor is out of the car being replaced(haha on him) well the broke off the top of the steering column off, and and messed up the key hole up a little bit, but there was a circuit board of some sort there as well. and was broken was wondering...

Alright i have a oil leak i can't find..it has a new valve cover gasket on it, and was told it had a new rear main seal installed when they put a new clutch in it.....i have got under the car tightend up the oil pan, checked misc bolts and such under the car, andrechecked the valve...

I recently installed a set of coil overs off a tsi, on to my eclipse GS, and everything sat even, well the rear shock broke last night, so i put the stock suspension back on the rear, now the car sits crooked as the right side(which is the one that broke)is about an inch or inch and a half lower...

Alright, i did a turbo conversion, to a n/t motor, everything was rather fine and dandy the other day i could start it, i let it warm up. now nothing. It rolls over like normal, its getting spark, there is fuel in the fuel rail, and the plugs are brand new. Any ideas as what it would be? Can...

Hey guys i've been searching around and i'm haveing trouble find pictures of the AMS Evo VIII that was painted candy brandy wine. It was up at the shootout this year as well as last year. The only pictures i can find of the car is on the AMS website. If you know where others are please post a...

Hey guys,,,just wanted to let ya know we have reserved our rooms for the 2006 shoot out:thumb: in Norwalk. So far the going rate for rooms are 149 per night. Hope to see you guys up there.. Sofar we got theSickness, Wibblersnatch, Airmail96. Later guys